Company Profile
Products
Welded Pipe
Tubular Piles
Seamless Pipe
OCTG
Stainless Pipe
Ductile Iron Pipe
Copper Tube
Fin Tube
Plastic Pipe
Steel Plate/Coil
Bar,Rod & Wire
Pipe Fittings
Fastener
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

ASME/ANSI B16.9,ASME B16.48,MSS SP-75,ASTM A860,ISO 15590-2 BUTTWELD FITTINGS
ASME/ANSI B16.9,ASME B16.48,MSS SP-75,ASTM A860,ISO 15590-2 BUTTWELD FITTINGS  US $ 1.8
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Buttwelding Fittings ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and Threaded ASME/ANSI B16.20 - 1998 - Metallic Gaskets for Pipe Flanges-Ring-Joint, Spiral-Would, and Jacketed ASME/ANSI B16.25 - 1997 - Buttwelding Ends ASM...
ASME B16.11/ASTM A105/ASTM A182  FORGING FITTINGS
ASME B16.11/ASTM A105/ASTM A182 FORGING FITTINGS
Carbon steels American Standards STANDARDS GRADES ASTM A36/A36M, ASTM A105/A105M, ASTM A181/A181M, ASTM A266/A266M, ASTM A290/A290M, ASTM A350/A350M, ASTM A504/A504M, ASTM A516/A516M, ASTM A551/A551M, ASTM A668/A668M, ASTM A694/A694M A105, A181 Class 60, A266 Grade 1, A266 Grade 2, A266 Gr...
ASTM A420,MSS SP-43/75,EN 10253-1,AWWA C208,ASTM A182,ASTM A234 WELDED FITTINGS
ASTM A420,MSS SP-43/75,EN 10253-1,AWWA C208,ASTM A182,ASTM A234 WELDED FITTINGS
Buttweld Fittings We are engaged in offering wide range of Buttweld Fittings such as: Elbows Equal Tee Reducing Tee Long & Short Stub End Swage Nipple & Barrel Nipple BUTTWELD, SOCKETWELD & THREADED FITTINGS & FLANGES Specification: ASTM A105 Forgings, Carbon Steel for piping com...
ASTM-A860-WPHY70-Butt-Welding-Elbow
ASME/ANSI B16.9,ASME B16.48,ASTM A234,MSS SP-75,ASTM A860 BUTTWELD ELBOW  US $ 1.8
  API-6H  End Closures, Connectors and Swivels ASME/ANSI B16 Standards covers pipes and fittings in cast iron , cast bronze, wrought copper and steel. ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings This Standard for Classes 25, 125, and 250 Cast Iron Pipe Flanges ...
ASME B16.9,MSS SP-43,MSS SP75,ASME A860 CARBON STEEL REDUCER
ASME B16.9,MSS SP-43,MSS SP75,ASME A860 CARBON STEEL REDUCER
ASME/ANSI B16.9,MSS SP75,MSS.SP-43 Carbon Steel Barred Tee
ASME/ANSI B16.9,ASME B16.48,ASTM A234,MSS SP-75,ASTM A860 TEE,BARRED TEE  US $ 1.8
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Buttwelding Fittings ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and Threaded ASME/ANSI B16.21 - 1992 - Nonmetallic Flat Gaskets for Pipe Flanges (c) dimensions and allowable tolerances. ASME/ANSI B16.25 - 1997 - Buttwelding...
EN 10219-1 S355J2H INDUCTION BENDS
API 5L,ASME B16.49,EN 14870-1,ISO 15590-1 Induction Bend/Hot Bend/Factory Bend
Induction Bending  is a controlled means of bending pipes through the application of local heating using high frequency induced electrical power. to create a narrow, circumferential, heated band around the material to be bent. When the appropriate temperature is reached, the material is pushed...
COLD BENDS, EN 1090-1 PROFILES FOR BUILDING STEEL STRUCUTURE
COLD BENDS, EN 1090-1 PROFILES FOR BUILDING STEEL STRUCUTURE
EN 1090-1,EN 10219-1 S355J2H/S460N,AS 4100 PREFAB STRUCTURAL STEEL PROFILES
EN 1090-1,EN 10219-1 S355J2H/S460N,AS 4100 PREFAB STRUCTURAL STEEL PROFILES
ANSI B16.9 TP316L STAINLESS STEEL CONCENTRIC REDUCER
ANSI B16.9,MSS SP-43,ASTM A403,ASTM A815,DIN 2605,EN 10253-2 SS FITTINGS
STAINLESS STEEL PIPE FITTINGS ASTMA 403/A 403M WROUGHT AUSTENITIC STAINLESS STEEL PIPE FITTINGS A 403/403M 0.08 2.00 1.00 0.03 0.045 18 8 - - 75000 3000 28(Longit) WP 304 max. 20 11 -515 -205 20(transv.) A 403/403M 0.035 2.00 1.00 0.03 0.045 18 18 -- -- 70000 2...
ASME-ANSI B16.9 TP304/304L stainless_steel_weld elbows
Stainless Steel Elbow 45, 90, 180 Degree
Stainless Steel Elbow 45, 90, 180 Degree Stainless steel elbow is connected two lengths of pipe or tubing applied in piping and plumbing systems, to change the direction, there are different angles, 45 degree, 90 degree, 180 degree. SS elbow have high strength under high pressure environment, and...
ASME B16.9,ASTM A403 STAINLESS STEEL REDUCER
ASME B16.9,ASTM A403 STAINLESS STEEL REDUCER
Threaded Casting Stainless Steel Fittings
ASME B16.11,ASTM A815,EN 10274,ISO 41444 Threaded Fittings
ASME B16.11,ASTM A105,ASTM A182 PTFE/TEFLON/GROOVED FITTINGS
ASME B16.11,ASTM A105,ASTM A182 PTFE/TEFLON/GROOVED FITTINGS
Standard and Code Grade Chemical Composition %,max Mechanical requirements C Mn P S Si Cr Mo Ni Cu Other σb MPa min σ0.2 MPa min δ % min HB max Other ASTM A105/A105M A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.30 0.12 0.40 0.40 V:0.05;Nb:...
ASME B16.47 (MSS SP-44),API 605,AWWA C207,AS 2129,AS 4087,DIN 2631 4-144" FLANGE
ASME B16.47 (MSS SP-44),API 605,AWWA C207,AS 2129,AS 4087,DIN 2631 4-144" FLANGE
AWWA C207 RING FLANGE Dimensions are in inches. Weights are in pounds.   Class D (175 psi for 12” and under and 150 psi for 14” and up) CLASS E (275psi)   CLASS F (300psi) Nominal Outside Number Diameter of Diameter of Inside Thickness  Approximate Thickness&n...
ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
Flanges Slip On Flanges (SORF) Slip on flanges are bored slightly larger than the outer Diameter of the matching pipe. The pipe slips into the flange prior to welding both inside and outside to prevent leaks.  Weld Neck Flanges (WNRF) Weld Neck Flanges (WNRF) is designed in line with inter...
ASME B16.5ASTM A350, AS 4087,AS 2129,EN 10222-2/4,ISO 7005 FORGED FLANGE
ASME B16.5ASTM A350, AS 4087,AS 2129,EN 10222-2/4,ISO 7005 FORGED FLANGE  US $ 200
ANSI B16.5,ASME B16.5,ASME B16.47,ASTM A182 SPECIAL FLANGES
ANSI B16.5,ASME B16.5,ASME B16.47,ASTM A182 SPECIAL FLANGES
ASTM A105 EPOXY COATED/GALVANIZED/NYLON/TEFLON FLANGE
ASTM A105 EPOXY COATED/GALVANIZED/NYLON/TEFLON FLANGE
ASTM A182 F316L STAINLESS STEEL BLIND FLANGE
ASTM B16.5,ASTM B16.47,ASTM A182 Stainless Steel Flange
Flanges Material   1.LIST OF MATERIAL SPECIFICATIONS Material Nominal Designation Pressure-Temperature Applicable ASTM Specifications Group Rating Table Forgings Castings Plates 2.1 18Cr-8Ni 2-2.1 A 182 Gr.F304 A 351 Gr.CF3 A 240 Gr.304 A 182 Gr.F304H A 351 Gr.CF8 A 2...

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap