Company Profile
Products
Welded Pipe
Seamless Pipe
Stainless Pipe
Ductile Iron Pipe
Fin Tube
OCTG
Copper Tube
Plastic Pipe
Pipe Fittings
Fastener
Flat & Rolled Metallic Materials
Pressure Vessel
Reference List
Association Membership
Inspection Report
Quality Policy
HSE
EPCM
News
Pipe Specs
CS Pipe Specs
Stainless Steel Specs
API Specs
EN & DIN Specification
Australian Standard
GOST Specification
Corrosion Protection
Steel Plate Specs
Fittings Specs
Fasteners Specs
Contact Us

Products 

 

ISO 15590-2/ASME B16.9/MSS SP-75/DIN2605-2617 LR ELBOW
Pipe Fittings-ASME/ANSI B16.9,ASME B16.47,ASME B16.48,MSS SP-75  US $ 1.8
  API-6H  End Closures, Connectors and Swivels ASME/ANSI B16 Standards covers pipes and fittings in cast iron , cast bronze, wrought copper and steel. ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings This Standard for Classes 25, 125, and 250 Cast Iron Pipe Flanges ...
AS1210 Dish Heads,Torispherical and Semi-Ellipsoidal Heads
AS1210 Dish Heads,Torispherical and Semi-Ellipsoidal Heads
Semi-Elliptical Heads: from 8⅝” (219 mm) O.D. to 192” (4,877 mm) I.D. ASME Code Flanged and Dished Heads: from 48” (1,219 mm) I.D. to 96” (2,438 mm) I.D. Hemispherical Heads: from 8⅝” (219 mm) O.D. to 144” (3,658 mm) I.D. Flanged Only Heads: from 31” (787 mm) O.D. to 76” (1,930 mm) I.D. (various di...
COLD BENDS,SECTION PROFILES FOR ARCHED TRUSS
COLD BENDS,SECTION PROFILES FOR ARCHED TRUSS
Butt Weld Fitting-ASTM A105,A182,ASTM A234,ASTM A420,MSS SP-43,MSS SP-75
Butt Weld Fitting-ASTM A105,A182,ASTM A234,ASTM A420,MSS SP-43,MSS SP-75
Buttweld Fittings We are engaged in offering wide range of Buttweld Fittings such as Bend and Buttweld Elbows, A403 Elbows, 304L Elbows, Steel Buttweld Fittings, Buttweld Equal Tee, Reducing Tee, Long and Short Stubend and Swage Nipple and Barrel Nipple. These are available in different specificat...
EN 10219,EN10210 S275JOH/S355/S355K2W/S355J2H/S460N,AS4100 PREFAB STEEL STRUCT
EN 10219,EN10210 S275JOH/S355/S355K2W/S355J2H/S460N,AS4100 PREFAB STEEL STRUCT
ASME B16.11/ASTM A105/ASTM A182  FORGING FITTINGS (LIQUID EPOXY LINED)
ASME B16.11/ASTM A105/ASTM A182 FORGING FITTINGS (LIQUID EPOXY LINED)
Standard and Code Grade Chemical Composition %,max Mechanical requirements C Mn P S Si Cr Mo Ni Cu Other σb MPa min σ0.2 MPa min δ % min HB max Other ASTM A105/A105M A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.30 0.12 0.40 0.40 V:0.05;Nb:...
A403WPW, A403WPX,ASTM A234,MSS SP-43,ASTM A403,ASTM A815 Stainless Pipe Fittings
A403WPW, A403WPX,ASTM A234,MSS SP-43,ASTM A403,ASTM A815 Stainless Pipe Fittings
STAINLESS STEEL PIPE FITTINGS ASTMA 403/A 403M WROUGHT AUSTENITIC STAINLESS STEEL PIPE FITTINGS A 403/403M 0.08 2.00 1.00 0.03 0.045 18 8 - - 75000 3000 28(Longit) WP 304 max. 20 11 -515 -205 20(transv.) A 403/403M 0.035 2.00 1.00 0.03 0.045 18 18 -- -- 70000 2...
ASME B16.11,ASTM A105,ASTM A182 PTFE/TEFLON/GROOVED FITTINGS
ASME B16.11,ASTM A105,ASTM A182 PTFE/TEFLON/GROOVED FITTINGS
Standard and Code Grade Chemical Composition %,max Mechanical requirements C Mn P S Si Cr Mo Ni Cu Other σb MPa min σ0.2 MPa min δ % min HB max Other ASTM A105/A105M A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.30 0.12 0.40 0.40 V:0.05;Nb:...
API 5L X65 PSL2 INDUCTION BENDS
API 5L PSL1/PSL 2,ASME B16.49,ISO 15590-1 Induction Bend/Cold Bend/Factory Bend
Induction Bending  is a controlled means of bending pipes through the application of local heating using high frequency induced electrical power. to create a narrow, circumferential, heated band around the material to be bent. When the appropriate temperature is reached, the material is pushed...
ASME B16.47 (MSS SP-44)/API 605/AWWA C207/ASTM A234 WP NPS26-NPS60  FLANGE
ASME B16.47 (MSS SP-44)/API 605/AWWA C207/ASTM A234 WP NPS26-NPS60 FLANGE
Chemical Requirements (Composition, %, max) Material Symbol C Mn P S Si Ni Cr Mo Cu N V Co ASTM A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.40 0.30 0.12 0.40 _ 0.08 _ ASTM A350 LF2 0.30 0.60-1.35 0.035 0.040 0.15-0.30 0.40 0.30 0.12 0.40 _ 0.08 0.02 ASTM ...
ASME B16.5/DIN2527/ASTM A105/ASTM A182 (NPS1/2-NPS24)  FLANGE
ASME B16.5/DIN2527/ASTM A105/ASTM A182 (NPS1/2-NPS24) FLANGE
Flanges We offer a comprehensive range of Flanges including Slip on Flanges (SORF), astm a182 flanges, monel 400 flanges, astm a181 flanges, Weld Neck Flanges, Blind Flanges, Socket Weld Flanges, Spectacle Flanges. These flanges are designed using finest grade of stainless steel to ensure long ser...
ASTM A182 STAINLESS STEEL FLANGE
ASTM B16.5/ASTM B16.47/ASTM A182 Stainless Steel Flange
Flanges Material   1.LIST OF MATERIAL SPECIFICATIONS Material Nominal Designation Pressure-Temperature Applicable ASTM Specifications Group Rating Table Forgings Castings Plates 2.1 18Cr-8Ni 2-2.1 A 182 Gr.F304 A 351 Gr.CF3 A 240 Gr.304 A 182 Gr.F304H A 351 Gr.CF8 A 2...
ASTM A105 LIQUID EPOXY LINED FLANGE
ASTM A105 LIQUID EPOXY LINED/HOT DIPPED GALVANIZED/NYLON COATED/TEFLON FLANGE
API 6A,API 6D,API 598,API 602,API 608,API 609 Valves
API 6A,API 6D,API 598,API 602,API 608,API 609 Valves
 We supply Flow Control System, Valve products and parts from several reputed and nominated valve manufacturers. API-599  Metal Plug Valves API-6D  Pipeline Valves (Steel Gate, Plug, Ball, and Check Valves) API-600  Bolted Bonnet Steel Gate Valves API-602  Compact Steel...
Insulating Joint-NACE RP-0297,ASME B31.8, MSS SP75
Insulating Joint-NACE RP-0297,ASME B31.8, MSS SP75
1.Description: Monolithic Insulation Joint is composed of the following parts: upper and lower conduits,sleeve, insulating part, seals and insulating coat. Insulating part and seal are fixed where upper and lower conduits are joined oppositely, which forms double sealing structure possessed o...
ASTM B31.3 Process Pipe,Pipe Spools,Fabricated Pipes,Manifold
ASTM B31.3 Process Pipe,Pipe Spools,Fabricated Pipes,Manifold
We have specialized in offshore Pipe Spool. With high quality, we completed pipe spools for drill ship, FPSO/FPU, Semi RIG & TLP and we are still progressing. Also, we have various and extensive experiences in pressure vessel , steel structure for onshore plant including HRSG. They prefabricated...
Forging/forged tube sheet(EN 2.4816, EN 2.4668, EN 2.4856, EN 2.4669, EN 2.4851,
Forging/forged tube sheet(EN 2.4816, EN 2.4668, EN 2.4856, EN 2.4669, EN 2.4851,
A tube sheet is a plate, sheet, or bulkhead which is perforated with a pattern of holes designed to accept pipes or tubes. These sheets are used to support and isolate tubes in heat exchangers and boilers or to support filter elements. Depending on the application, a tube sheet may be made of vario...
Pumps
Pumps
Pumps We supply practically all kinds of pump and parts from our manufacturer, which is one of the largest in the industry. Centrifugal Pumps Diaphragm Pumps Dosing Pump Double Diaphragm Pumps Duplex Pumps Fixed Flow Pumps Gear Pumps High Power Pumps Lobe Pumps Metering Pumps Mud Pumps Non Seal P...
Gaskets,Washers
Gaskets,Washers
Our company provide almost all kinds of metallic gasket - spiral wound gaskets, ring joint gaskets, double jacket gaskets, kammprofile gaskets, corrugated gaskets. RTJ6500oval - Oval Ring Joint Gasket RTJ6500oval gasket is manufactured according to the API 6A and ASME B 16.20 standard. CNC machin...

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Inspection Report  |  Quality Policy  |  HSE  |  EPCM  |  News  |  Pipe Specs  |  CS Pipe Specs  |  Stainless Steel Specs  |  API Specs  |  EN & DIN Specification  |  Australian Standard  |  GOST Specification  |  Corrosion Protection  |  Steel Plate Specs  |  Fittings Specs  |  Fasteners Specs  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap