Company Profile
Products
Welded Pipe
Tubular Piles
Seamless Pipe
OCTG
Stainless Pipe
Ductile Iron Pipe
Copper Tube
Fin Tube
Plastic Pipe
Steel Plate/Coil
Bar,Rod & Wire
Pipe Fittings
Fastener
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

API 2B,API 5L X52,ASTM A252 GR.3,AS 1163,AS 1554,BS 4360,JIS A5525 TUBULAR PILES
API 2B,API 5L X52,ASTM A252 GR.3,AS 1163,AS 1554,BS 4360,JIS A5525 TUBULAR PILES  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
API 2B Certified LSAW welded carbon steel pipes used in pile structures
API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE  US $ 815
O.D W.T. Length(m) Min.Yield Strength(Mpa) In. Mm 245(B) 290(X42) 360(X52) 415(X60) 450(X65) 485(X70) 555(X80) 625(X90) 690(X100) 16 406 6.0-37.0 6.0-34.0 6.0-31.0 6.0-29.0 6.0-28.0 6.0-27.0 6.0-26.0 6.0-25.0 6.0-24.0 6.0-50.0 18 457 6.0-40.0 6.0-37.0 6.0-34.0 6...
AS 1579/AS 1163 C350 PIPE PILES +ISO 12944/AS 1750 Interzone 954 BLACK COATING
AS 1579/AS 1163 C350 PIPE PILES +ISO 12944/AS 1750 Interzone 954 BLACK COATING  US $ 790
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
AS 1163,EN10219-1 S355+AS 1750/ISO 12944 STEEL PIPE PILES WITH FBE/3LPE COATING
AS 1163,EN10219-1 S355+AS 1750/ISO 12944 STEEL PIPE PILES WITH FBE/3LPE COATING  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
Shear Bead Pipe Piles
ASTM A252,AS 1163,EN10219 S355,EN 10225 STEEL PIPE PILES WITH BACK-UP RINGS/BARS  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
ASTM A252 GR.3 FOUNDATION PILES WITH O-CLUTCHES
ASTM A252,AS 1579,AS 1163,JIS A5525,EN 10219 INTERLOCKED PIPE PILES  US $ 765
  O.D. Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248             &...
ASTM A252,EN10025-2,EN10219-1,DIN 17120,BS 3601,DIN 1626 PILING PIPES WITH STUDS
ASTM A252,EN10025-2,EN10219-1,DIN 17120,BS 3601,DIN 1626 PILING PIPES WITH STUDS  US $ 785
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
EN 102191-1 S355 TUBULAR PILES WITH CONICAL POINTS
ASTM A252,EN10219 S355,EN 10225,JIS A5525 FOUNDATION PILES WITH CONICAL POINTS  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
API 2B,API 5L,AS 1163,BS 7191,EN10225,EN 10208-2,JIS A5525 OFFSHORE PIPE PILES
API 2B,API 5L,AS 1163,BS 7191,EN10225,EN 10208-2,JIS A5525 OFFSHORE PIPE PILES  US $ 825
                                                              Scope of Supply O.D\W.T.          &nb...
WIND TURBINE TOWER
DIN 18800-7,EN 10025,EN10029,EN 10113-2 MONOPILES FOR WINDFARM  US $ 825
Wind Turbine Tower IntroductionWind turbine tower is the pole of the complete wind power generation system. As the wind speed increases with the increase of altitude, wind turbine towers are used to support the upper wind turbines to reach a certain height and absorb the vibration of the wind turbi...
ASTM A572 GR.50,API 5L X65,EN 10225 SUBSEA AND OFFSHORE WINDFARM MONOPILES
ASTM A572 GR.50,API 5L X65,EN 10225 SUBSEA AND OFFSHORE WINDFARM MONOPILES  US $ 800
API 2H,ASTM A572 GR.50,ASTM A595 GR70,S355J0H  ANCHOR PILES,MEGA XL MONOPILES
API 2H,ASTM A572 GR.50,ASTM A595 GR70,S355J0H ANCHOR PILES,MEGA XL MONOPILES  US $ 825
Wind Turbine Tower IntroductionWind turbine tower is the pole of the complete wind power generation system. As the wind speed increases with the increase of altitude, wind turbine towers are used to support the upper wind turbines to reach a certain height and absorb the vibration of the wind turbi...
API 2H GR50,API 2W GR50/GR60,ASTM A 572 GR50,S355,S420 G2,API 5L X52 JACK-UP LEG
API 2H GR50,API 2W GR50/GR60,ASTM A 572 GR50,S355,S420 G2,API 5L X52 JACK-UP LEG  US $ 755
ASTM A572.GR.50 BACKING RINGS
API 2B,ASTM A252,BS 3601,DIN 1626,EN 10217-3/5,EN 10255 Driving Shoe,Jacket,Ring  US $ 825
DIAMETERS   20 24 28 30 34 36 42 48 54 60 72 84 100 120 140 150 WALL THICKNESS Mín 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" Max 0.500" 1.000" 1.000" 1.188" 1.188" 2.250" 2.250" ...
EN 10025,EN 10149,EN 10028,EN 10083,EN 10208,EN 10225 PIPE FOR GENERAL PURPOSE
EN 10025,EN 10149,EN 10028,EN 10083,EN 10208,EN 10225 PIPE FOR GENERAL PURPOSE  US $ 785
DIAMETERS   20 24 28 30 34 36 42 48 54 60 72 84 100 120 140 150 WALL THICKNESS Mín 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" Max 0.500" 1.000" 1.000" 1.188" 1.188" 2.250" 2.250" ...
ASTM A595 A,ASTM A572 50/65,EN 10219 S355 STEEL TOWER,STEEL LIGHTING Pole
ASTM A595 A,ASTM A572 50/65,EN 10219 S355 STEEL TOWER,STEEL LIGHTING Pole  US $ 725
We offers a variety of Steel Pole types to meet your specific communication tower needs. Our Tapered Steel Poles and Flanged Steel Poles feature designs that are aesthetically pleasing and blend well into the environment while requiring minimum space for installation. All of our Steel Poles are hot...
ASTM A595,DIN 4131,BS 8100,JIS G3444 Telecommunication Monopile,Antenna pole
ASTM A595,DIN 4131,BS 8100,JIS G3444 Telecommunication Monopile,Antenna pole  US $ 735
~The latest editions of the standards, codes of practice and publications listed below are being applied to the steel works: •TIA/EIA–222-F and TIA/EIA–222-G: Structural standards for steel antenna poles and antenna supporting structures. •DIN 4131: Antenna towers – Monopoles. •BSI CP 3: Code of ba...
ASTM A595 A,ASTM A572 65 Tapered Pole,Traffice Sign Pole,Lighting Pole,Lamp Pole
ASTM A595 A,ASTM A572 65 Tapered Pole,Traffice Sign Pole,Lighting Pole,Lamp Pole  US $ 715
We offers a variety of Steel Pole types to meet your specific communication tower needs. Our Tapered Steel Poles and Flanged Steel Poles feature designs that are aesthetically pleasing and blend well into the environment while requiring minimum space for installation. All of our Steel Poles are hot...
STEEL COLUMN SUPPORT
ASTM A252,AS 1163,JIS G3444,GOST 10705 STEEL PIPE COLUMN, STEEL SUPPORT  US $ 800
Protective coatings for oil-and-gas-producing-slots-at-offshore-platform-oil-and-gas-industry-well-head-slot-on-the-platform
ISO 12944,ISO 20344,AS 2312 Protective Coatings

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap