Company Profile
Products
Welded Pipe
Steel Piles
Seamless Pipe
OCTG
Stainless Pipe
Titanium Tube
Finned Tube
Copper Tube
Aluminium Profile
Ductile Iron Pipe
Plastic Pipe
Pipe Fittings
Flange
Fastener
Steel Plate/Coil
Bar,Rod & Wire
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

API 2B,API 5L X52,ASTM A252,AS 1163,BS 7191, EN 10225 LSAW STEEL PIPE PILES
API 2B,API 5L X52,ASTM A252,AS 1163,BS 7191, EN 10225 LSAW STEEL PIPE PILES  US $ 780
Tubular Piles      Tubular piles are tubular pipes used for piling purposes,which are also called steel piles,piping tubes,or tubular piling. Tubular piles are normally large diameter piles because bigger bending moment are required in lots of cases.  Our Advantages Ø With ou...
API 2B,API 5L X52,ASTM A252,AS 1163,BS 7191, EN 10225 SSAW STEEL PIPE PILES
API 2B,API 5L X52,ASTM A252,AS 1163,BS 7191, EN 10225 SSAW STEEL PIPE PILES  US $ 780
  1.Tubular Piles Tubular piles are tubular pipes used for piling purposes,which are also called steel piles,piping tubes,or tubular piling. Tubular piles are normally large diameter piles because bigger bending moment are required in lots of cases.  Tubular piling are available in nu...
ASTM A252 GR.3/AS 1163 C350 SPIRAL WELDED PIPE PILES
AS 1579/AS 1163 C350 PIPE PILES +ISO 12944/AS 1750 Interzone 954 BLACK COATING  US $ 790
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
API 2B,API 2H, API 2W,API 5L,AS 1163,BS 7191,EN10225 OFFSHORE PIPE PILES
API 2B,API 2H, API 2W,API 5L,AS 1163,BS 7191,EN10225 OFFSHORE PIPE PILES  US $ 825
                                                              Scope of Supply   1 OFFSHORE PILING Marine piling is the process of build...
Shear Bead Pipe Piles
ASTM A252,AS 1163,EN10219 S355,EN 10225 PIPE PILES WITH REINFORCING RINGS/BARS  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
ASTM A252 GR.3 WITH P-T JOINT+EN ISO 12944 EPOXY COATINGch
ASTM A252,EN 10219 combination wall PIPE PILE WITH P-P,P-T,L-T,C9-C6,ZK CLUTCH  US $ 765
  O.D. Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248             &...
Sheet piling corner sections connectors interlocks for steel tubular pile 2
ASTM A252,EN 10219-1,EN 10248-1/2,EN 10249-1/2 STEEL PIPE SHEET PILES  US $ 765
  O.D. Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248             &...
ASTM A252,EN10025-2,EN10219-1,DIN 17120,BS 3601,DIN 1626 PILING PIPES WITH STUDS
ASTM A252,EN10025-2,EN10219-1,DIN 17120,BS 3601,DIN 1626 PILING PIPES WITH STUDS  US $ 785
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
STM A252 GR.2 FOUNDATION PILES WITH CONICAL POINT
ASTM A252,ASTM A572,EN10219,EN 10225,JIS A5525 PIPE PILES WITH CONICAL POINT  US $ 780
Dia Wall Thickness mm mm   8.0 8.8 9.5 10.0 11.0 12.5 14.2 16.0 17.5 19.0 20.0 20.6 22.2 23.8 25.0             508 99 108 117 123 135 153 173 194 212 229 241 248               5...
WIND TURBINE TOWER
DIN 18800-7,EN 10025,EN10029,EN 10113-2 MONOPILES FOR WINDFARM  US $ 825
Wind Turbine Tower IntroductionWind turbine tower is the pole of the complete wind power generation system. As the wind speed increases with the increase of altitude, wind turbine towers are used to support the upper wind turbines to reach a certain height and absorb the vibration of the wind turb...
ASTM A572 GR.50,API 5L X65,EN 10225 SUBSEA AND OFFSHORE WINDFARM MONOPILES
ASTM A572 GR.50,API 5L X65,EN 10225 SUBSEA AND OFFSHORE WINDFARM MONOPILES  US $ 800
API 2H,ASTM A572 GR.50,ASTM A595 GR70,S355J0H  ANCHOR PILES,MEGA XL MONOPILES
API 2H,ASTM A572 GR.50,ASTM A595 GR70,S355J0H ANCHOR PILES,MEGA XL MONOPILES  US $ 825
Wind Turbine Tower IntroductionWind turbine tower is the pole of the complete wind power generation system. As the wind speed increases with the increase of altitude, wind turbine towers are used to support the upper wind turbines to reach a certain height and absorb the vibration of the wind turbi...
DSAW LOAD OUT JACK UP BARGE LEG
API 2H/API 2W GR50/GR60,ASTM A 572 GR55,S355/S420,API 5L X52,BS 7191 JACKUP LEG  US $ 755
API 2B,BS 3601,BS 7191,EN 10217,EN 10255,A572-50 Plate Rolling and Bending
API 2B,BS 3601,BS 7191,EN 10217,EN 10255,A572-50 Plate Rolling and Bending  US $ 825
 The process begins with the edge trimming of the steel plate to the required width. The pipe is formed by pyramid rolls to later be welded by the Double Submerged Arc Welding process. In the finishing area, the pipe is inspected and tested to guarantee the quality required by the client. Co...
EN 10025,EN 10149,EN 10028,EN 10083,EN 10208 Plate Bending TUBE PROFILING
EN 10025,EN 10149,EN 10028,EN 10083,EN 10208 Plate Bending TUBE PROFILING  US $ 785
DIAMETERS   20 24 28 30 34 36 42 48 54 60 72 84 100 120 140 150 WALL THICKNESS Mín 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" 0.250" Max 0.500" 1.000" 1.000" 1.188" 1.188" 2.250" 2.250" ...
ASTM A595 A,ASTM A572 50/65,EN 10219 S355 STEEL TOWER,STEEL LIGHTING Pole
ASTM A595 A,ASTM A572 50/65,EN 10219 S355 STEEL TOWER,STEEL LIGHTING Pole  US $ 725
We offers a variety of Steel Pole types to meet your specific communication tower needs. Our Tapered Steel Poles and Flanged Steel Poles feature designs that are aesthetically pleasing and blend well into the environment while requiring minimum space for installation. All of our Steel Poles are hot...
ASTM A595,DIN 4131,BS 8100,JIS G3444 Telecommunication Monopile,Antenna pole
ASTM A595,DIN 4131,BS 8100,JIS G3444 Telecommunication Monopile,Antenna pole  US $ 735
~The latest editions of the standards, codes of practice and publications listed below are being applied to the steel works: •TIA/EIA–222-F and TIA/EIA–222-G: Structural standards for steel antenna poles and antenna supporting structures. •DIN 4131: Antenna towers – Monopoles. •BSI CP 3: Code of ba...
ASTM A595 A,ASTM A572 65 Tapered Pole,Traffice Sign Pole,Lighting Pole,Lamp Pole
ASTM A595 A,ASTM A572 65 Tapered Pole,Traffice Sign Pole,Lighting Pole,Lamp Pole  US $ 715
We offers a variety of Steel Pole types to meet your specific communication tower needs. Our Tapered Steel Poles and Flanged Steel Poles feature designs that are aesthetically pleasing and blend well into the environment while requiring minimum space for installation. All of our Steel Poles are hot...
STEEL COLUMN SUPPORT
ASTM A252,AS 1163,JIS G3444,GOST 10705 STEEL PIPE COLUMN, STEEL SUPPORT  US $ 800
ISO 12944,ISO 20344,AS 2312 Protective Coatings
ISO 12944,ISO 20344,AS 2312 Protective Coatings

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap