Company Profile
Products
Welded Pipe
Steel Piles
Seamless Pipe
OCTG
Stainless Pipe
Titanium Tube
Finned Tube
Copper Tube
Aluminium Profile
Ductile Iron Pipe
Plastic Pipe
Pipe Fittings
Flange
Fastener
Steel Plate/Coil
Bar,Rod & Wire
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

Fin Tube, Finned Tube-ASME SA179, SA192, SA213, EN10216-5
Fin Tube, Finned Tube-ASME SA179, SA192, SA213, EN10216-5
                 Solid type   FIN THICKNESS(MM)T 0.8 1.2 1.5 TUBE O.D / FPI 3 5 7 3 5 7 2 4 6 1" (25.4MM) 0.44 0.68 0.92 0.44 0.68 0.92 0.32 0.58 0.8 1 1/4" (31.8MM) 0.67 1.05 1.42 0.67 1.05 1.42 0.47 0.85 1....
High Frequency Welded Spiral Fin Tube
High Frequency Welded Spiral Fin Tube
High Frequency Welded Solid Fin Tube   Base Tube O.D (mm) Base Tube Thickness (mm) Fin Height (mm) Fin Thickness(mm) Fin Pitch(mm) 22 mm ~219 mm 2.0 mm ~16 mm 8 mm ~ 30 mm 0.8 mm ~ 4.0 mm 2.8 mm ~ 20 mm Base Tube Material Fin Material Tube Length (Mtr) Carbon Steel ...
High Frequency Welded Serrated Finned tube
High Frequency Welded Serrated Finned tube
High Frequency Welded Serrated Fin Tube Base Tube O.D (mm) Base Tube Thickness (mm) Fin Height (mm) Fin Thickness(mm) Fin Pitch(mm) 22 mm ~219 mm 2.0 mm ~16 mm 10 mm ~ 32 mm 0.8 mm ~ 4.0 mm 2.8 mm ~ 20 mm Base Tube Material Fin Material Tube Length (Mtr) Carbon Steel ,Al...
double-h-fin-tube
H/HH Fin Tube,Square/Rectangular Fin Tube,Plate Finned Tube
Square/Rectangular Fin Tube   Base Tube O.D (mm) Base Tube Thickness (mm) Fin Height (mm) Fin Thickness(mm) Fin Pitch(mm) 25.4 mm ~50.8 mm 2.5 mm ~5.0 mm 0.5 mm ~20.0 mm 0.5 mm ~3.0 mm 5 mm ~ 25.4 mm Base Tube Material Fin Material Tube Length (Mtr) Carbon Steel ,Al...
L Fin/LL Fin/KL Fin/ Extruded/G Embedded FinTube
L Fin/LL Fin/KL Fin/ Extruded/G Embedded FinTube
Tension Wound Fin Tubes The Tension Wound Fin means the fins wrapped tightly around the tube and welded or stapled at the ends of tubes to hold the form. Tension Wound Fins can also be solder-coated to strength the corrosion resistance. Tension wound fin works especially prefer with fins and tubes...
ASTM A179 low-finned-steel-tubes-for-LNG-plants
ASTM A498,ASTM A1012,ASTM B359,ASME SB359,ASTM B898 Integral Fin Tube
Integrally Finned Tube Developed as a method of increasing heat transfer performance of fluids whilst minimising the physical size and cost of the heat exchanger The fin is produced by being rolled from the wall of the tube and is therefore integral with the tube itself. Due to fin rolling t...
Longitudinally Finned Tube
Longitudinal Fin Tube
                                                                                 Longitudinal ...
STUD TUBE,STUDDED TUBE
STUD TUBE,STUDDED TUBE
Studded Tube or called Nailhead Tube Studded tube(Pin tube) Studded tube is also known as the head tube screw ribbed tube. Studded tube is more widely used in the petrochemical industry. Especially, in order to strengthen the heat transfer effect in the outside of the tube, Studded tube ...

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap