Company Profile
Products
Welded Pipe
Seamless Pipe
Stainless Pipe
Ductile Iron Pipe
Fin Tube
OCTG
Copper Tube
Plastic Pipe
Pipe Fittings
Fastener
Flat & Rolled Metallic Materials
Pressure Vessel
Reference List
Association Membership
Inspection Report
Quality Policy
HSE
EPCM
News
Pipe Specs
CS Pipe Specs
Stainless Steel Specs
API Specs
EN & DIN Specification
Australian Standard
GOST Specification
Corrosion Protection
Steel Plate Specs
Fittings Specs
Fasteners Specs
Contact Us

Products 

 

API 5CT J55,K55,N80-1,N80-Q,L80-1,L80-9Cr,L80-13Cr,C90,T95,P110,Q125 CASING
API 5CT J55,K55,N80-1,N80-Q,L80-1,L80-9Cr,L80-13Cr,C90,T95,P110,Q125 CASING  US $ 850
API 5CT Casing & Tubing API H40  Minimum Yield Strength: 40,000 psi Maximum Yield Strength: 80,000 psi Minimum Tensile Strength: 60,000 psi Notes: General purpose pipe manufactured to API specification 5CT.  API J55  Minimum Yield Strength: 55,000 psi Maximum...
API 5CT L80-9Cr/L80- 13Cr Corrosion Resistant Alloy Casing and Tubing
API 5CT L80-9Cr/L80- 13Cr Corrosion Resistant Alloy Casing and Tubing
Corrosion Resistant Alloys   MECHANICAL PROPERTIES & Chemical Composition Grade Min. Yield Strength Max. Yield Strength [Ksi] Min. Tensile Strength [Ksi] Max. Hardness Value [Hrc] Chemical Comp.                 C.Max ...
High Collapse Casing & Tube-API 5CT 80HC,90HC,110HC,125HC,140HC
High Collapse Casing & Tube-API 5CT 80HC,90HC,110HC,125HC,140HC
Our High Collapse (HC) grades exhibit higher collapse pressure than what is determined by API 5CT/ISO 11960 products. proprietary Grade fit for high-pressure service We provides the High Collapse Series of proprietary steel grades for oil and gas wells where high external pressures are antic...
API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing  US $ 900
Oil Tubing Keywords:API 5CT Steel Pipe, J55,K55,L80,N80Q,C90,T95,P110 Oil/Petroleum Casing Pipe, OCTG 1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2" 2) Grade: J55, N80, L80, C90, T95, P110 3) Wall thickness: 3.18 - 10.54mm 4) Length: R1,R2,R3 5) Thread: 8RD and 10RD 6) All our Tubing accord...
API 5CT H40,J55,K55,N80 Slotted Liners,Screen Pipe & Perforated Pipe
API 5CT H40,J55,K55,N80 Slotted Liners,Screen Pipe & Perforated Pipe
Slotted Casing/Pipes Material: stainless steel, carbon steel, API material, J55/K55,N80,L80,P110 The slotted liner is mainly used to the water and oil reservation layer without much sand. It's function is to prevent rock bits from dropping into the well bore. The working principle is to allow...
API 5DP E75,X95,G105,S135,V150  Drill Pipe
API 5DP E75,X95,G105,S135,V150 Drill Pipe  US $ 2.5
Drill Pipes   Standard: API 5D Grade: E75,X95,G105,S135,V150 Spec OD of drill pipe body Wall thickness of drill pipe OD of welding neck Tool joint RSC chamfer diameter Approximation quality OD internal diameter of male thread lenght of male thread's OD lenght of female thread's ...
Heavy Weight Drill Pipe(HWDP)-API 5DP AISI 4142H-4145H
Heavy Weight Drill Pipe(HWDP)-API 5DP AISI 4142H-4145H
Integral Heavy Weight Drill Pipe   According to API Spec.7, integral heavy weight drill pipe is made of forged or rolled AISI 4142H-4145H. , and formed by hot forging as a whole and fully heat-treated. Tool joints connections and central upset can be with hardbanding.. Th...
API 5DP SQUAR DRILL PIPE
API SPEC 7 4142H-4145H SQUARE KELLY & HEXAGONAL DRILL PIPE
Square Kelly   Based on API, Square Kelly is made from forged or rolled AISI 4142H-4145H alloy steel. It is formed by hot forged and fully heat- treated, and also by intermediate frequency induction heat treatment or 20m horizontal optical resistance furnace, which can provide high phy...
API Spec 7/API RP 7G AISI 4145H Drill Collar
API Spec 7/API RP 7G AISI 4145H Drill Collar
  According to API Spec.7 and SY/T5144, drill collar is made of AISI 4145 modified chromium- molybdenum alloy steel. All threads are phosphated, copperized or cold rolled , and they are machined with CNC Lathes –Double –shoulderd, including some special threads. The maximum outer diameter of ...
API 5DP AISI4145H Spiral Drill Collars
API 5DP AISI4145H Spiral Drill Collars
Spiral Drill Dollars   Standard size Outer diameter Depth of cut mm Pitch ± 25.4 mm Depth of cut mm mm in 98.4 3 7/8 4.0 ± 0.79 914   101.6~111.1 4~4 3/8 4.8 ± 0.79 914 114.3~130.2 4 1/2~5 1/8 5.6 ± 0.79 965 133.4~146.1 5 1/4~5 3/...
API 5DP N1310 Non-Magnetic Drill Collars-
API 5DP N1310 Non-Magnetic Drill Collars-
Non-magnetic Drill Collars   ·    According to API Spec.7 and SY/T5144, the non-magnetic drill collars are made of low carbon stainless steel N1310 L-C alloy steel, which are researched and developed independently by our technical personnel. All threads are cold rolled, a...
API 11B K,C,D,HL Sucker Rod,API 11AX Sucker Rod Pump
API 11B K,C,D,HL Sucker Rod,API 11AX Sucker Rod Pump
Technical Parameters of Sucker Rod   SIZE  ROD D.(in) THREAD D.  LENGTH  OUTSIDE DIAMETER   LENGTH   LENGTH OF WRENCH   WIDTH OF WRENCH SQUARE(mm) (in) (in) (ft) OF PIN SHOULDER(mm) OF PIN(mm) SQUARE(mm) 5/8" 5/8" ...
API -7-1 NEAR BIT Integral Blade Stabilizer (IBS)
API -7-1 NEAR BIT Integral Blade Stabilizer (IBS)
Standard Sizes and Styles for Stabilizers OD D1 mm D2 mm L2 mm d mm L±20mm Short Type Long Type String style Near-bit style String style Near-bit style L3=150 L1=350 L3=300 L1=700 152.4~165.1 121 400 500 51 950 1050 1100 1200 1450 1550 1650 1750 &nbs...
Double-Shouldered High Toque Tool Joint(DSJT)
Double-Shouldered High Toque Tool Joint(DSJT)
Item O.D. of Tool Joint I.D. of Pin Yield Strength Strength Ratio Torque Box Pin Body Box / Body Pin / Body Unit mm mm ft-lb ft-lb ft-lb     ft-lb S135 API Standard 168 69.9 63,979 62,918 74,100 0.86 0.85 37,751 DCHT50 API I.D. 168 69.9 92,537 91,477 74,100 ...
API 5CT Coupling
API 5CT Coupling
Tubing coupling   Standard: API Spec 5CT   Size: 1.050" - 4-1/2"   Type: NUE, EUE    Oil Tubing Coupling (API Spec 5CT & 5B) API Non-upset Tubing Coupling-Dimension, Tolerances and Masses Label 1 Outside Diameter mm Minimum Length NL  mm Diameter of r...
API 7-2 Cross-Over Sub
API 7-2 Cross-Over Sub
Cross-Over Sub Cross-over sub serves to conversion and connection . It is the basic component in downhole work.It is divided into drill string crossover and tubing Crossover.Drill string Cross-over is divided into type A, type B and type C. Technical Parameter of Drill String Cross-Over Joint S...

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Inspection Report  |  Quality Policy  |  HSE  |  EPCM  |  News  |  Pipe Specs  |  CS Pipe Specs  |  Stainless Steel Specs  |  API Specs  |  EN & DIN Specification  |  Australian Standard  |  GOST Specification  |  Corrosion Protection  |  Steel Plate Specs  |  Fittings Specs  |  Fasteners Specs  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap