Company Profile
Products
Welded Pipe
Pipe Piles
Seamless Pipe
Stainless Pipe
Ductile Iron Pipe
Fin Tube
OCTG
Copper Tube
Plastic Pipe
Steel Plate/Coil
Bar,Rod & Wire
Pipe Fittings
Fastener
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

EN545,EN598,ISO 2531,AS 2280,BS 4772 Flanged Joint Ductile Iron Pipes

  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Flanged Joint Ductile Iron Pipes
  • EN545 C30 DN400 FLANGED DUCTILE IRON PIPE
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Flanged Joint Ductile Iron Pipes
  • Flange-Pipes-ISO-2531-En545-En598
  • AS 2280 FLANGED DUCTILE IRON PIPES
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Flanged Joint Ductile Iron Pipes
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Flanged Joint Ductile Iron Pipes
Model No.︰-
Brand Name︰-
Country of Origin︰-
Unit Price︰-
Minimum Order︰-
Share on:

 Total 8 Related Items 
Prev12345Next

Product Description

 

Product Type: Mechanical (K-Type) Joint

Weight of K Type joint Ductile Iron Pipes (K9 class standard effective length 8m)

Nominal Diameter
DN(mm)
Barrel Socket
(kg)
Total Weight
(kg)
DE
(mm)
e
(mm)
Weight
(kg/m)
6m 8m
1000 1048 13.5 309.3 146.6 2002 2621
1200 1255 15.3 420.1 201 2722 3562
1400 1462 17.1 547.2 265.8 3549 4643
1600 1668 18.9 690.3 375.4 4517 5898
1800 1875 20.7 850.1 490.6 5591 7291
2000 2082 22.5 1026.3 626.4 6784 8837
2200 2288 24.3 1218.3 784.2 8094 10531
2400 2495 26.1 1427.2 966.2 9529 12384
2600 2702 27.9 1652.4 1173.7 11088 14393


(DN100-1600mm 6m,DN1800-2600mm 8m)Permissible Defletion Angles

 

Nominal Diameter
DN(mm)
Allowable Angles of Deflection at Installation work
T-TYPE K-TYPE
100 5°00′ 5°00′
125 5°00′ 5°00′
150 5°00′ 5°00′
200 5°00′ 5°00′
250 4°00′ 5°00′
300 4°00′ 5°00′
350 4°00′ 4°00′
400 3°00′ 4°00′
450 3°00′ 3°00′
500 3°00′ 3°00′
600 3°00′ 2°00′
700 2°00′ 2°00′
800 2°00′ 2°00′
900 2°00′ 2°00′
1000 2°00′ 1°00′
1200 2°00′ 1°00′
1400 2°00′ 1°00′
1600 2°00′ 1°00′
1800 2°00′ 1°00′
2000 2°00′ 1°00′
2200 2°00′ 1°00′
2400 2°00′ 1°00′
2600 2°00′ 1°00′

 

Specifications︰Specification

ISO 2531 Ductile iron pipes, fittings, accessories and their joints for water or gas application

EN 545, Ductile iron, pipes, fittings, accessories and their joints for water pipelines -Requirements and test methods

EN 598, Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

EN 877, Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance

EN 969, Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

EN 12842, Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

BS 4772-1988 Specification for ductile iron pipes and fittings

ISO 7186-2011 Ductile iron products for sewerage applications
ISO8179 standard for zinc spraying
Coating with metallic zinc which contains zinc at least 99.99%. The thickness of zinc coating is not less than 130g/m2
ISO 4179 standard for cement mortar lining
AS/NZS 2280 Ductile Iron Pipes and Fittings


Main technical characteristics: flange joints are rigid joints. Flanges are fixed on either ends of barrel pipe piece. This type of joint can be made in Ductile Iron pipes in three different manufacturing processes. They are:

As Cast flanged pipes: In As Cast flanged pipes the ductile iron pipes with flanges are cast in foundries with integrally cast flanges on them. These flange pipes are normally of very small length say 1 to 1.5 m. They are heavier to handle and one may have to use many pipes for vertical lift and as much extra bolts, nuts etc. This type flange pipes are used for very small lengths.
Welded on flanged pipes: In Welded on flanged pipes the flanges are welded on to the ends of the pipe barrels.
Screwed on flanged pipes: In screwed on flanged pipes both flanges and barrels of DI pipe are provided with female and male threads respectively. The flanges are threaded over the DI pipe barrel.
The jointing of the two flanged end pipes is done by placing gaskets in between the flanges and tightening the flanges with bolts, nuts and washers.

Internal linings:

Cement Mortar Lining - is a dense homogeneous layer covering the entire inner surface of the trunk of the pipe. The mixture of cement mortar contains cement, sand and water. Cement can be of several types depending on the type and chemical composition of the fluid pumped in the pipeline: ordinary portland cement (OPC), sulphate resistant cement (SRC), blast furnace slag cement (BFSC), high alumina cement (HAC). At the same time, the water used in the cement-sand mixture corresponds to the standard set for drinking water. The thickness of the cement-sand coating is for pipes DN40-300 - 4,00 mm, DN350-600 - 5,00 mm, DN700-1200 - 6,00 mm, DN1400-2000 - 9,00 mm, DN2200 - 12,00 mm.;
Epoxy Seal Coat;
Bituminous Seal Coat.
Outside coatings:

Zinc Coating (130 gm/m²² or 400 gm/m²);
Alloy of Zinc and Aluminum with a minimum mass of 400 gm/m².
Finishing protection layer:

Blue epoxy (from 70 to 100 micron);
Redepoxy;
Black bitumen
Special coating:

External and Internal Polyurethane Coating (DN 100 - DN 1600)
International standards: ISO2531, ISO7186, BS EN545, BS EN598, ISO:9001, ISO:14001.

Competitive advantages:

Fast execution of the installation and possibility of reducing the number of fittings;
Excellent behavior in case of earthquake;
Low roughness that determines minimum pressure losses Resistance to corrosion by corrosive waters;
Resistance to corrosion by aggressive soils in most of the cases.
IMPORTANT! The technical specialists of our company are always ready to help you make the right choice of Ductile Iron Pipes taking into account the characteristics of the pumped medium, the working pressure in the system, the specifics of the soil for laying pipes and a number of other important factors that will ensure the durability of the pipeline system built
Product Image


EN545 C30 DN400 FLANGED DUCTILE IRON PIPE
EN545 C30 DN400 FLANGED DUCTILE IRON PIPE


Flange-Pipes-ISO-2531-En545-En598
Flange-Pipes-ISO-2531-En545-En598

AS 2280 FLANGED DUCTILE IRON PIPES
AS 2280 FLANGED DUCTILE IRON PIPES



Related Products
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Ductile Iron Pipe
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Ductile Iron Pipe
US $ 440
ISO 2531,EN  545,EN 598,BS 4772,AS 2280 Tyton (Push-on Joint) Ductile Iron Pipe
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Tyton (Push-on Joint) Ductile Iron Pipe
CNY ¥ 450
ISO2531 Self Anchoring Joint Type Ductile Iron Pipes
Ductile iron pipe with Self Anchored Joint/Mechanical Socket Joint (RAJ)
ASTM A888,BS 437,BS EN 877,CSA B70,ISO 6594,KSD 4307 Cast Iron Pipe
ASTM A888,BS 437,BS EN 877,CSA B70,ISO 6594,KSD 4307 Cast Iron Pipe

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap