Company Profile
Products
Welded Pipe
Steel Piles
Seamless Pipe
OCTG
Stainless Pipe
Titanium Tube
Finned Tube
Copper Tube
Aluminium Profile
Ductile Iron Pipe
Plastic Pipe
Pipe Fittings
Flange
Fastener
Steel Plate/Coil
Bar,Rod & Wire
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes

  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes
  • double-flanged-ductile-iron pipe
  • EN545 C30 DN400 FLANGED DUCTILE IRON PIPE
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes
  • Flange-Pipes-ISO-2531-En545-En598
  • EN545,EN598,ISO 2531,AS 2280,BS 4772 Ductile Iron Flanged Pipes
Model No.︰-
Brand Name︰-
Country of Origin︰-
Unit Price︰-
Minimum Order︰-
Share on:

 Total 9 Related Items 
Prev12345Next

Product Description

 

Dimensions: PN16

DN

D1

D2

D3

DE

C

F

S

R

Bolts

Mass

(kg)

d

size

n

200

132

19

15

19

8

100

180

118

3

6

M16

3.3

285

211

19

15

23

8

200

295

222

3

8

M20

6.6

400

319

22

17.5

28

12

300

410

326

4

10

M24

12.4

520

429

26.5

21

28

16

400

525

429

4

10

M27

21.9

640

548

30

24

31

20

500

650

532

4

12

M30

37.0

840

720

36

29

37

20

700

840

738

5

16

M33

57.0

1025

901

43

30

40

24

900

1050

945

5

16

M36

90.0

1255

1112

50

35

43

28

1100

1270

1152

5

20

M39

141

1485

1328

57

40

49

32

1400

1590

1462

5

20

M45

216

1930

1750

65

45.5

56

40

1800

2020

1875

5

20

M52

362.2

2345

2150

75

52.5

62

48

2200

2440

2288

6

20

M56

512.3

2765

2570

86

60

62

56

2600

2850

2702

6

20

M56

672

Specifications︰Specification

ISO 2531 Ductile iron pipes, fittings, accessories and their joints for water or gas application

EN 545, Ductile iron, pipes, fittings, accessories and their joints for water pipelines -Requirements and test methods

EN 598, Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

EN 877, Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance

EN 969, Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

EN 12842, Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

BS 4772-1988 Specification for ductile iron pipes and fittings

ISO 7186-2011 Ductile iron products for sewerage applications
ISO8179 standard for zinc spraying
Coating with metallic zinc which contains zinc at least 99.99%. The thickness of zinc coating is not less than 130g/m2
ISO 4179 standard for cement mortar lining
AS/NZS 2280 Ductile Iron Pipes and Fittings


Main technical characteristics: flange joints are rigid joints. Flanges are fixed on either ends of barrel pipe piece. This type of joint can be made in Ductile Iron pipes in three different manufacturing processes. They are:

As Cast flanged pipes: In As Cast flanged pipes the ductile iron pipes with flanges are cast in foundries with integrally cast flanges on them. These flange pipes are normally of very small length say 1 to 1.5 m. They are heavier to handle and one may have to use many pipes for vertical lift and as much extra bolts, nuts etc. This type flange pipes are used for very small lengths.
Welded on flanged pipes: In Welded on flanged pipes the flanges are welded on to the ends of the pipe barrels.
Screwed on flanged pipes: In screwed on flanged pipes both flanges and barrels of DI pipe are provided with female and male threads respectively. The flanges are threaded over the DI pipe barrel.
The jointing of the two flanged end pipes is done by placing gaskets in between the flanges and tightening the flanges with bolts, nuts and washers.

Internal linings:

Cement Mortar Lining - is a dense homogeneous layer covering the entire inner surface of the trunk of the pipe. The mixture of cement mortar contains cement, sand and water. Cement can be of several types depending on the type and chemical composition of the fluid pumped in the pipeline: ordinary portland cement (OPC), sulphate resistant cement (SRC), blast furnace slag cement (BFSC), high alumina cement (HAC). At the same time, the water used in the cement-sand mixture corresponds to the standard set for drinking water. The thickness of the cement-sand coating is for pipes DN40-300 - 4,00 mm, DN350-600 - 5,00 mm, DN700-1200 - 6,00 mm, DN1400-2000 - 9,00 mm, DN2200 - 12,00 mm.;
Epoxy Seal Coat;
Bituminous Seal Coat.
Outside coatings:

Zinc Coating (130 gm/m²² or 400 gm/m²);
Alloy of Zinc and Aluminum with a minimum mass of 400 gm/m².
Finishing protection layer:

Blue epoxy (from 70 to 100 micron);
Redepoxy;
Black bitumen
Special coating:

External and Internal Polyurethane Coating (DN 100 - DN 1600)
International standards: ISO2531, ISO7186, BS EN545, BS EN598, ISO:9001, ISO:14001.

Competitive advantages:

Fast execution of the installation and possibility of reducing the number of fittings;
Excellent behavior in case of earthquake;
Low roughness that determines minimum pressure losses Resistance to corrosion by corrosive waters;
Resistance to corrosion by aggressive soils in most of the cases.
IMPORTANT! The technical specialists of our company are always ready to help you make the right choice of Ductile Iron Pipes taking into account the characteristics of the pumped medium, the working pressure in the system, the specifics of the soil for laying pipes and a number of other important factors that will ensure the durability of the pipeline system built
Product Image




double-flanged-ductile-iron pipe
double-flanged-ductile-iron pipe

EN545 C30 DN400 FLANGED DUCTILE IRON PIPE
EN545 C30 DN400 FLANGED DUCTILE IRON PIPE


Flange-Pipes-ISO-2531-En545-En598
Flange-Pipes-ISO-2531-En545-En598


Related Products
EN598-600mm-ductile-cast-iron-pipe
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Ductile Iron Pipe
US $ 440
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Centrifugal ductile cast iron pipes
ISO 2531,EN 545,EN 598,BS 4772,AS 2280 Centrifugal ductile cast iron pipes
US $ 440
ISO 2531,EN 545,EN 598 Self-restrained Joint/mechanical joint Ductile Iron Pipe
ISO 2531,EN 545,EN 598 Self-restrained Joint/mechanical joint Ductile Iron Pipe
ISO 2531,EN  545,EN 598 Ductile Iron Pipe With Polyurethane_coating
ISO 2531,EN 545,EN 598 Ductile Iron Pipe With Polyurethane_coating
CNY ¥ 450

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap