|
|
|
|
| ISO 2531,ISO 7186,EN545,EN598,AS2280,BS4772-K-Type Joint Ductile Iron Pipes |
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | - |
| Unit Price︰ | - |
| Minimum Order︰ | - |
|
|
|
|
|
Adopt quality natural rubber, synthetic rubber and many kinds rubber additive to produce gaskets Surface dimensions of product in accordance with standard GB13295 Product material in accordance with ISO4633,ISO 2531,EN 545,EN598
Product type: T type, K type
Weight of K Type joint Ductile Iron Pipes (K9 class standard effective length 8m)
Nominal Diameter
DN(mm) |
Barrel |
Socket
(kg) |
Total Weight
(kg) |
DE
(mm) |
e
(mm) |
Weight
(kg/m) |
6m |
8m |
| 1000 |
1048 |
13.5 |
309.3 |
146.6 |
2002 |
2621 |
| 1200 |
1255 |
15.3 |
420.1 |
201 |
2722 |
3562 |
| 1400 |
1462 |
17.1 |
547.2 |
265.8 |
3549 |
4643 |
| 1600 |
1668 |
18.9 |
690.3 |
375.4 |
4517 |
5898 |
| 1800 |
1875 |
20.7 |
850.1 |
490.6 |
5591 |
7291 |
| 2000 |
2082 |
22.5 |
1026.3 |
626.4 |
6784 |
8837 |
| 2200 |
2288 |
24.3 |
1218.3 |
784.2 |
8094 |
10531 |
| 2400 |
2495 |
26.1 |
1427.2 |
966.2 |
9529 |
12384 |
| 2600 |
2702 |
27.9 |
1652.4 |
1173.7 |
11088 |
14393 |
(DN100-1600mm 6m,DN1800-2600mm 8m)Permissible Defletion Angles
Nominal Diameter
DN(mm) |
Allowable Angles of Deflection at Installation work |
| T-TYPE |
K-TYPE |
| 100 |
5°00′ |
5°00′ |
| 125 |
5°00′ |
5°00′ |
| 150 |
5°00′ |
5°00′ |
| 200 |
5°00′ |
5°00′ |
| 250 |
4°00′ |
5°00′ |
| 300 |
4°00′ |
5°00′ |
| 350 |
4°00′ |
4°00′ |
| 400 |
3°00′ |
4°00′ |
| 450 |
3°00′ |
3°00′ |
| 500 |
3°00′ |
3°00′ |
| 600 |
3°00′ |
2°00′ |
| 700 |
2°00′ |
2°00′ |
| 800 |
2°00′ |
2°00′ |
| 900 |
2°00′ |
2°00′ |
| 1000 |
2°00′ |
1°00′ |
| 1200 |
2°00′ |
1°00′ |
| 1400 |
2°00′ |
1°00′ |
| 1600 |
2°00′ |
1°00′ |
| 1800 |
2°00′ |
1°00′ |
| 2000 |
2°00′ |
1°00′ |
| 2200 |
2°00′ |
1°00′ |
| 2400 |
2°00′ |
1°00′ |
| 2600 |
2°00′ |
1°00′ |
|
|
|
|
| Specifications︰ | Manufacturing Standard For Ductile iron pipe
ISO 2531:1998
GB/T13295:2008
BS EN545:2002
BS EN 598
BS 4772-1988 Specification for ductile iron pipes and fittings
ISO8179 standard for zinc spraying
Coating with metallic zinc which contains zinc at least 99.99%. The thickness of zinc coating is not less than 130g/m2
ISO 4179 standard for cement mortar lining
1. Before painting: remove dirt of socket and then brush with semi-gloss, innocuity,quickly drying,red high build anti-corrosive paint (guarantee appearance quality, gloss, corrosion resistance,staying quality).
2. Warm up the pipe to a temperature of 70—80°C and paint with high build bituminous anti-corrosive paint
3. Entering into dry furnace to dry quickly in a temperature of 60---70°C. |
| Standard Met︰ | Detailed introduction to cast flange:
flange, ductile fittings, cast flange
1.Standards:ISO2531,EN545,EN598,BS4772
2.Material:GGG500-7,450-10.450-12
3.Coating:Fusion bonded epoxy coating;cement lining inside and zinc and bitumen coating outside; Zinc+bitumen inside and outside.
Coating:Epoxy resin coating Blue: 5015 5005, red 3009 3019
4.Package:Wooden cases or pallets
5.Accessories:Gaskets,bolts and nuts
flange connect PN10 and PN16, PN10 Number of drilling 8,PN16 Number of drilling 4.8.12.16 .20
We manufacture and supply ductile iron pipe fabrications from 80mm-1200mm. We supply all sizes possible from short double spigots to longer double flanged pipes. All our pipework is available in BS EN545 blue and BS EN598 red.
1The use of the products and performanceNot only does ductile iron have high tensile strength and percentage elongation,but also have fine ductility and other excellent as anti-high-compression,
Anti-oxidation,anti-corrosion,etc.so the ductile iron pipe fittings are widely applied to such compressive pipes as water pipeline.oil pipeline,gas pipeline,sand pipeline,sewerage pipeline etc
2. Product standards:All types of ductile iron pipe fittings produced by us according to ISO2531 BSEN545 EN598 BS4772 standards
3. Product export countries:Europe,South America,Africa,Middle East and South-East Asia,Their good quality has got a favorable appraisal from the end users.
4.Product Mechanical:Tensile strength>420mpa
Elongation>5%
Hardness<250HB
Proof Stress>300map
5.Product Microscopic Structure:ferrite+little pearlite grades of ductile lron>grade three(GB9941-88)
6.Type of joint:
.Push-on joint(Ttype) including Spigot end,EPDM&SBR rubber gasket,Anti-corrosive layer
Mechanical joint(Ktype)including spigot end,rubber gasket,anti-forrosive layer,T-bolts&nuts
Socket end
,flange joint(flange type)including flanged fittings,rubber gasket,flange-bolts&nuts.
7.Hydrostatic Test Pressure
Diameter:DN50-300 fittings 25 bar
Diameter:DN350-800 fittings 16 bar
8.flanged drilling standards:PN10&PN16&PN25&PN40,AWWA C110.
9. Surface treatmentfitting Internal epoxy powder coating External pink resin paint.Black Bitumen Coated or Blue Fusion Bonded Epoxy Coated as specified.
10.Internal lining: Cement Mortar Lined according to ISO 4179
|
|
|
| Select Image |
 |
|
|
|
|
|
|
|
|
