|
|
|
|
| ASTM A193,ASTM A194-Bolts |
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | - |
| Unit Price︰ | - |
| Minimum Order︰ | - |
|
|
|
|
|
ASTM A193 B7
Stock Lengths: 6 ft. and 12 ft.
NATIONAL COARSE (USS) & UN-8
| Size |
Wt Per 100' |
Pieces Per Tube |
| 1/4-20 |
12.2 |
50/10* |
| 5/16-18 |
19.9 |
35/10* |
| 3/8-16 |
29.3 |
25/10* |
| 7/16-14 |
40.2 |
17/10* |
| 1/2-13 |
53.3 |
12 |
| 9/16-12 |
67.8 |
10 |
| 5/8-11 |
84.3 |
8 |
| 3/4-10 |
123.5 |
5 |
| 7/8-9 |
170.5 |
4 |
| 1-8 |
223.1 |
2 |
| 1 1/8-7 |
281.1 |
1 |
| 1 1/8-8 |
303.4 |
1 |
| 1 1/4-7 |
353.7 |
1 |
| 1 1/4-8 |
361.8 |
1 |
| 1 3/8-6 |
423.2 |
1 |
| 1 3/8-8 |
462.4 |
1 |
| 1 1/2-6 |
512.2 |
1 |
| 1 1/2-8 |
533.8 |
1 |
| 1 5/8-8 |
631.6 |
1 |
| 1 3/4-5 |
694.7 |
1 |
| 1 3/4-8 |
738.4 |
1 |
| 1 7/8-8 |
853.6 |
1 |
| 2-4 1/2 |
911.8 |
1 |
| 2-8 |
976.1 |
1 |
| 2 1/4-8 |
1250.0 |
1 |
| 2 1/2-4 |
1448.0 |
1 |
| 2 1/2-8 |
1550.0 |
1 |
| 2 3/4-8 |
1889.0 |
Bulk |
| 3-8 |
2260.0 |
Bulk |
| 3 1/4-8 |
2671.0 |
Bulk |
| 3 1/2-8 |
3111.0 |
Bulk |
| 3 3/4-8 |
3754.8 |
Bulk |
| 4-8 |
4272.1 |
Bulk |
*available in 10 piece tube quantities
Zinc & Yellow Zinc available upon Request
Tubes labeled with Size, Lot & Heat numbers. Chemical & Physical Test Reports available.
NATIONAL FINE (SAE)
| Size |
Wt Per 100' |
Pieces Per Tube |
| 1/4-28 |
13.4 |
50/10* |
| 5/16-24 |
21.4 |
35/10* |
| 3/8-24 |
31.8 |
25/10* |
| 7/16-20 |
43.1 |
17/10* |
| 1/2-20 |
57.5 |
12 |
| 5/8-18 |
91.4 |
8 |
| 3/4-16 |
132.7 |
5 |
| 7/8-14 |
181.7 |
4 |
| 1-14 |
240.5 |
2 |
| 1-1/8-12 |
303.4 |
1 |
| 1-1/4-12 |
378.7 |
1 |
| 1-3/8-12 |
424.3 |
1 |
| 1-1/2-12 |
554.4 |
1 |
*available in 10 piece tube quantities
ASTM A320 L7 Threaded Rod
Alloy Steel Bolting Material for Low-Temperature Service
Stock Lengths: 12 ft.
5/8" thru 2 1/2" - Minimum Tensile Strength 125,000
Charpy Impact Tested
NATIONAL COARSE (USS) & UN-8
| Size |
Wt Per 100' |
Pieces Per Tube |
| 5/8-11 |
84.3 |
8 |
| 3/4-10 |
123.5 |
5 |
| 7/8-9 |
170.5 |
4 |
| 1-8 |
223.1 |
2 |
| 1 1/8-8 |
303.4 |
1 |
| 1 1/4-8 |
361.8 |
1 |
| 1 3/8-8 |
462.4 |
1 |
| 1 1/2-8 |
533.8 |
1 |
| 1 5/8-8 |
631.6 |
1 |
| 1 3/4-8 |
738.4 |
1 |
| 1 7/8-8 |
853.6 |
1 |
| 2-8 |
976.1 |
1 |
| 2 1/4-8 |
1250.0 |
1 |
| 2 1/2-8 |
1550.0 |
1 |
| 2 3/4-8 |
1889.0 |
Bulk |
| 3-8 |
2260.0 |
Bulk |
ASTM A320 L7 Threaded Studs
Vulcan Threaded doesn't just make threaded rod. Vulcan Threaded Products is a Domestic manufacturer of ASTM A193 Gr.B7 threaded studs in a wide variety of sizes. Whether Fully Threaded or Double Ended, 2 inches long or 240* inches long, Vulcan can fill all of your B7 threaded stud requirements.
A193 Gr.B7
Chemical Requirements
| Carbon |
Manganese |
Phosphorus |
Sulfur |
Silicon |
Chromium |
Molybdenum |
| 0.37-0.49 |
0.65-1.10 |
0.035 max |
0.040 max |
0.15-0.35 |
0.75-1.20 |
0.15-0.25 |
Mechanical Requirements
2 1/2" diameter and under
| Tensile Strength, min. |
Yield Strength, min. 0.2% offset |
Elongation in 4D, min. % |
Reduction of Area, min.% |
Hardness, max |
| 125,000 |
105,000 |
16 |
50 |
321 HB |
Over 2 1/2" to 4" diameter
| Tensile Strength, min. |
Yield Strength, min. 0.2% offset |
Elongation in 4D, min. % |
Reduction of Area, min.% |
Hardness, max |
| 115,000 |
95,000 |
16 |
50 |
321 HB |
|
|
|
|
| Specifications︰ | Steel Fasteners
Range: M10 TO M100 , 3/8 h UNC TILL 4h UN8 LENGTH UPTO 5 METERS.
Forms:
Stud Bolts
Hex Bolts
Square Bolts
Hex Nuts
T-Head Bolts
Friction Grip Bolts
Structural Bolts
U-Bolts
J-Bolts
Tie Bolts
Eye Bolts
Foundation Bolts
As per drawing and customers specifications.
Carbon Steel, Stainless Steel, Nickel Alloy & Alloy Steel Fasteners
Standard: A193-B7, A193-B16, A194-2H, A194-8MA, A193-B7M , A320-L7, A194-2HM, A194-3, A193-B8, A320L7M , A194-8 , A194-4，A193-B8M, A320 B8, A194-8A, A194-7
Grade: B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4,
Standard: ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Grade: UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
Standard: ASTM / ASME A/SA 193 / 194 GR.
Grade: B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M.
COATINGS
ZINE PLATING
SILVER PLATING
BI-CHROMATING
NICKEL PLATING
HOT-DIPPED GALV’D
POLYFIN COATING
PTFEC FLUOROCABON
CADMIUM PLATING
NEOPRENE COATING
|
|
|
| Select Image |
 |
|
|
|
| |
| Steel Fasteners
Range: M10 TO M100 , 3/8�h UNC TILL 4�h UN8 LENGTH UPTO 5 METERS.
Forms:
Stud Bolts
Hex Bolts
Square Bolts
Hex Nuts
T-Head Bolts
Friction Grip Bolts
Structural Bolts
U-Bolts
J-Bolts
Tie Bolts
Eye Bolts
Foundation Bolts
As per drawing and customers specifications.
Carbon Steel, Stainless Steel, Nickel Alloy & Alloy Steel Fasteners
Standard: A193-B7, A193-B16, A194-2H, A194-8MA, A193-B7M , A320-L7, A194-2HM, A194-3, A193-B8, A320L7M , A194-8 , A194-4，A193-B8M, A320 B8, A194-8A, A194-7
Grade: B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4,
Standard: ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Grade: UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
Standard: ASTM / ASME A/SA 193 / 194 GR.
Grade: B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M.
COATINGS
ZINE PLATING
SILVER PLATING
BI-CHROMATING
NICKEL PLATING
HOT-DIPPED GALV’D
POLYFIN COATING
PTFEC FLUOROCABON
CADMIUM PLATING
NEOPRENE COATING |
|
|
|
|
|
|
|
