|
|
|
|
|
ASTM A789,ASTM A790 UNS S31803,UNS S32205,UNS S32750,UNS S32760 Duplex SS Tube
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | - |
| Unit Price︰ | US $ 9.5 / KG |
| Minimum Order︰ | 200 KG |
|
|
|
|
|
|
|
|
| ASTM A790/928 UNS |
EN 10216-2 Seamless / EN 10217-5 Welded |
Material No. (WNr) |
| S31260 |
X2CrNiMoN25-7-4 |
1.4410 |
| S32900 |
X3CrNiMoN27-5-2 |
1.4460 |
| S31803 / S32205 |
X2CrNiMoN22-5-3 |
1.4462 |
| S32760 |
X2CrNiMoCuWN25-7-4 |
1.4501 |
| S32750 / S32550 |
X2CrNiMoCuN25-6-3 |
1.4507 |
Composition of Duplex Stainless Steelsa
The table lists the duplex stainless steels covered in ASTM specifications for plate, sheet, and bar products.
|
UNS Number
Duplex Grades
|
Typeb
|
C
|
Mn
|
P
|
S
|
Si
|
Cr
|
Ni
|
Mo
|
N
|
Cu
|
Other
|
|
S31200
|
...
|
0.030
|
2.00
|
0.045
|
0.030
|
1.00
|
24.0-26.0
|
5.5-6.5
|
1.20-2.00
|
0.14-0.20
|
...
|
...
|
|
S31260
|
...
|
0.03
|
1.00
|
0.030
|
0.030
|
0.75
|
24.0-26.0
|
5.5-7.5
|
2.5-3.5
|
0.10-0.20
|
0.20-0.80
|
W0.10-0.20
|
|
S31803
|
...
|
0.030
|
2.00
|
0.030
|
0.020
|
1.00
|
21.0-23.0
|
4.5-6.5
|
2.5-3.5
|
0.08-0.20
|
...
|
|
|
S32001
|
...
|
0.030
|
4.0-6.0
|
0.040
|
0.030
|
1.00
|
22.0-23.0
|
1.00-3.00
|
0.60
|
0.05-0.17
|
1.00
|
|
|
S32205
|
2205
|
0.030
|
2.00
|
0.030
|
0.020
|
1.00
|
19.5-21.5
|
4.5-6.5
|
3.0-3.5
|
0.14-0.20
|
...
|
|
|
S32304
|
2304
|
0.030
|
2.50
|
0.040
|
0.030
|
1.00
|
21.5-24.5
|
3.0-5.5
|
0.05-0.60
|
0.05-0.20
|
0.05-0.60
|
|
|
S32520
|
...
|
0.030
|
1.50
|
0.035
|
0.020
|
0.80
|
24.0-26.0
|
5.5-8.0
|
3.0-4.0
|
0.20-0.35
|
0.50-2.00
|
|
|
S32550
|
255
|
0.04
|
1.50
|
0.040
|
0.030
|
1.00
|
24.0-27.0
|
4.5-6.5
|
2.9-3.9
|
0.10-0.25
|
1.5-2.5
|
|
|
S32750
|
2507
|
0.030
|
1.20
|
0.035
|
0.020
|
0.80
|
24.0-26.0
|
6.0-8.0
|
3.0-5.0
|
0.24-0.32
|
0.50
|
|
|
S32760
|
...
|
0.030
|
1.00
|
0.030
|
0.010
|
1.00
|
24.0-26.0
|
6.0-8.0
|
3.0-4.0
|
0.20-0.30
|
0.50-1.00
|
c
|
|
S32900
|
329d
|
0.06
|
1.00
|
0.040
|
0.030
|
0.75
|
23.0-28.0
|
2.5-5.0
|
1.0-2.0
|
...
|
...
|
|
|
S32950
|
...
|
0.03
|
2.00
|
0.035
|
|
|
|
|
|
|
|
|
a Weight percent, maximum unless otherwise noted.
b Unless otherwise indicated, a common name, not a trademark, widely used, not associated with any one producer, as listed in ASTM A 240.
c W 0.50-1.00; Cr+3.3Mo+16N=40 min.
d AISI designation
Material:
Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN10088 F51
Duplex SAF2205 SANMAC, URANUS 45N, PREN=33, PREN=34, PREN=35, PREN=36 DIN 1.4462
Duplex-2205 UNS S31803 / UNS S32205 DIN-1.4462 EN 10088-3 PREN = 33, PREN = 34, PREN = 35
Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53
Super Duplex SAF 2507 UNS S32750 DIN 1.4410 EN10088 URANUS 47N(+) PREN=41 A812 F-53
Super Duplex UNS S32760 F-55 ASTM A182 F55 SA182 F-55 DIN 1.4501 UNS 32760 F55
ASTM A-213/213M UNS S30432,UNS S31042
Material:10Cr18Ni9NbCu3BN, 07Cr25Ni21NbN（ASME TP310HCbN）
Duplex Stainless Steels have a structure that contains both ferrite and austenite. Duplex alloys have higher strength and better stress corrosion cracking resistance than most austenitic alloys and greater toughness than ferritic alloys, especially at low temperatures. The corrosion resistance of duplex alloys depends primarily on their composition, especially the amount of chromium, molybdenum, and nitrogen they contain. Duplex alloys are often divided into three sub-classes: Lean Duplex (AL 2003?alloy), Standard Duplex (AL 2205 alloy), and Superduplex (AL 255 Alloy and UNS S32760).
BENEFITS
High strength,
High resistance to pitting, crevice corrosion resistance.
High resistance to stress corrosion cracking, corrosion fatigue and erosion,
Excellent resistance to chloride stress-corrosion cracking
High thermal conductivity
Low coefficient of thermal expansion
Good sulfide stress corrosion resistance,
Low thermal expansion and higher heat conductivity than austenitic steels,
Good workability and weldability,
High energy absorption.
APPLICATIONS
Heat exchangers, tubes and pipes for production and handling of gas and oil,
Heat exchangers and pipes in desalination plants,
Mechanical and structural components,
Power industry FGD systems,
Pipes in process industries handling solutions containing chlorides,
Utility and industrial systems, rotors, fans, shafts and press rolls where the high corrosion fatigue strength can be utilized,
Cargo tanks, vessels, piping and welding consumables for chemical tankers.
High-strength, highly resistant wiring.
|
|
|
|
| Specifications︰ | Duplex Stainless Steels: Part One
Abstract:
Stainless steel is the name given to a family of corrosion and heat resistant steels containing a minimum of 10.5% chromium. Just as there is a range of structural and engineering carbon steels meeting different requirements of strength, weldability and toughness, so there is a wide range of stainless steels with progressively higher levels of corrosion resistance and strength.
Duplex stainless steels have a mixture of austenitic and ferritic grains in their microstructure; hence they have a duplex structure. This effect is achieved by adding less nickel than would be necessary for making a fully austenitic stainless steel.
Microstructure
Stainless steel is the name given to a family of corrosion and heat resistant steels containing a minimum of 10.5% chromium. Just as there is a range of structural and engineering carbon steels meeting different requirements of strength, weldability and toughness, so there is a wide range of stainless steels with progressively higher levels of corrosion resistance and strength. This results from the controlled addition of alloying elements, each offering specific attributes in respect of strength and ability to resist different environments. The available grades of stainless steel can be classified into five basic families: ferritic, martensitic, austenitic, duplex and precipitation hardenable.
The division based on microstructure is useful because the members within one family tend to have similar physical and mechanical properties. However, the properties for one family can be very different from the properties for another family. For example, austenitic stainless steels are non-magnetic, while ferritic and duplex stainless steels are magnetic.
The difference between the families is fundamental on the atomic level. The arrangement of atoms in the ferrite crystal is different from the one in the austenite crystal:
Figure 1: The ferritic stainless steel on the left has a body centered cubic (bcc) crystal structure. By adding nickel to this stainless steel the structure changes from bcc to face centered cubic (fcc), which is called austenitic.
In the ferritic stainless steel, the iron and chromium atoms are arranged on the corners of a cube and in the center of that cube. In the austenitic stainless steels the atoms, here iron, chromium and nickel, are arranged on the corners of the cube and in the center of each of the faces of the cube. This seemingly small difference profoundly affects the properties of these steels.
Table 1: Select properties of austenitic and ferritic stainless steels
Properties Austenitic Ferritic
Toughness Very high Moderate
Ductility Very high Moderate
Weldability Good Limited
Thermal expansion High Moderate
Stress corrosion cracking resistance Low Very high
Magnetic properties Non-magnetic Ferro magnetic
Because of their good mechanical properties and the ease of fabrication, austenitic stainless steels are much more widely used than ferritic stainless steels. About 75% of all stainless steel used worldwide is austenitic and about 25% is ferritic. The other families, martensitic, duplex and precipitation hardenable stainless steels each represent less than 1% of the total market.
Besides nickel there are other elements that tend to make the structure austenitic. These elements are called austenite formers. Alloying elements that tend to make the structure ferritic are called ferrite formers.
Table 2: Alloying elements formers for stainless steel microstructure
Ferrite formers Austenite formers
Iron Nickel
Chromium Nitrogen
Molybdenum Carbon
Silicon Manganese
Copper
Duplex stainless steels have a mixture of austenitic and ferritic grains in their microstructure; hence they have a duplex structure. This effect is achieved by adding less nickel than would be necessary for making a fully austenitic stainless steel.
Figure 2: Adding 8% nickel to a ferritic chromium stainless steel makes an austenitic chromium-nickel stainless steel, for example Type 304 stainless steel. If less nickel is added to a chromium steel, about four or five percent, a duplex structure, a mixture of austenite and ferrite, is created as in 2205 duplex stainless steel.
Austenitic-ferritic (Duplex) stainless steels contain increased amount of chromium (18% -28%) and decreased (as compared to austenitic steels) amount of nickel (4.5% - 8%) as major alloying elements. As additional alloying element molybdenum is used in some of Duplex steels. Since the quantity of nickel is insufficient for formation of fully austenitic structure, the structure of Duplex steels is mixed: austenitic-ferritic.
The properties of Duplex steels are somewhere between the properties of austenitic and ferritic steels. Duplex steels have high resistance to the stress corrosion cracking and to chloride ions attack. These steels are weldable and formable and possess high strength
In the annealed condition, most wrought duplex stainless steels contain about 40-50% austenite in a ferrite matrix. When these materials solidify, σ ferrite forms first. Depending upon the composition, a varying amount of austenite is expected to form as the last material solidifies.
Additional austenite forms by a solid-phase transformation during subsequent annealing. Accordingly, an annealed product is expected to contain more austenite than as-cast or as-welded material. A sufficient amount of austenite must be maintained to provide satisfactory corrosion resistance and mechanical properties. This amount of austenite may vary with the service application and with alloy composition and thermal history.
Additional phases found in duplex stainless steels can include σ, χ, R, α', carbides and nitrides. These phases have generally been studied using isothermal heat treatments in the laboratory.
Sigma Phase
Sigma is a hard, brittle intermetallic phase which is expected to contain iron, chromium and molybdenum in most duplex stainless steels. In these alloys, σ generally can be formed between about 600 and 950°C, with the most rapid formation occurring between 700 and 900°C.
Sigma typically nucleates in the austenite-ferrite grain boundaries and grows into the adjacent ferrite. Often, additional austenite forms in the areas of chromium depletion adjacent to the σ phase. Elements which stabilize ferrite such as chromium, molybdenum and silicon increase the tendency to form the σ phase. On a weight percent basis, molybdenum can promote σ phase formation much more effectively than chromium, particularly at higher temperatures (e.g. about 900°C). Austenite forming elements such as nickel or nitrogen can also accelerate the nucleation and growth of the σ phase, although these elements may reduce the total amount formed.
The alloy elements are portioned, and increased levels of each element tend to be present in the phases they stabilize. As nickel or nitrogen stabilize additional austenite, the reduced amount of ferrite becomes enriched in chromium and molybdenum. As a result, σ phase formed may be reduced by nickel or nitrogen, however, because of the smaller volume fraction of ferrite.
The σ phase can deplete chromium and molybdenum in surrounding areas and reduce resistance to corrosion. As little as about 1% σ phase may reduce impact toughness, while about 10% can cause complete embrittlement of duplex stainless steels.
Super-Duplex Stainless Steels and their characteristics
The first-generation Duplex stainless steels were developed more than 70 years ago in Sweden for use in the sulfite paper industry. Duplex alloys were originally created to combat corrosion problems caused by chloride-bearing cooling waters and other aggressive chemical process fluids.
Called Duplex because of its mixed microstructure with about equal proportions of ferrite and austenite, Duplex stainless steels are a family of grades, which range in corrosion performance depending on their alloy content. The term "Super-Duplex" was first used in the 1980's to denote highly alloyed, high-performance Duplex steel with a pitting resistance equivalent of >40 (based on Cr% + 3.3Mo% + 16N%).
With its high level of chromium, Super-Duplex steel provides outstanding resistance to acids, acid chlorides, caustic solutions and other environments in the chemical/petrochemical, pulp and paper industries, often replacing 300 series stainless steel, high nickel super-austenitic steels and nickel-based alloys.
The chemical composition based on high contents of chromium, nickel and molybdenum improves intergranular and pitting corrosion resistance. Additions of nitrogen promote structural hardening by interstitial solid solution mechanism, which raises the yield strength and ultimate strength values without impairing toughness. Moreover, the two-phase microstructure guarantees higher resistance to pitting and stress corrosion cracking in comparison with conventional stainless steels.
From the introduction of its first-generation, Duplex steel has seen a steady increase in popularity. Recently, the production of high-strength, corrosion resistant super-duplex coil has been implemented in the marine and chemical industries, architecture and mast riggings, wire lines, lifting and pulley equipment and well service strands. In fact, development of wire processing techniques has enabled the production of steel wires down to 1mm in diameter.
The various Alloys
Super-Duplex falls under the Duplex stainless steel grouping. Duplex stainless steels are graded for their corrosion performance depending on their alloy content. Today, modern Duplex stainless steel can be divided into four groups:
Lean Duplex such as 2304, which contains no deliberate Mo addition;
2205, the work-horse grade accounting for more than 80% of duplex usage;
25 Cr duplex such as Alloy 255 and DP-3;
Super-Duplex; with 25-26 Cr and increased Mo and N compared with |
|
|
Product Image
|
|
astm-a790-uns-s31803-s32205-seamless-pipe-1
ASME SA790 S31803 STAINLESS STEEL PIPE
ASTM A790 UNS S31803 SMLS
ASTM A789 S32205 DUPLEX STAINLESS STEEL TUBE
ASTM A928 S31803 WELDED STAINLESS STEEL PIPE
ASTM A790 UNS S32750 SEAMLESS STAINLESS STEEL PIPE
ASTM A790 UNS S32760 SUPER DUPLEX STAINLESS STEEL PIPE
ASTM A789 UNS S32750 SUPER DUPLEX STAINLESS STEEL PIPE
|
|
|
| |
| Seamless Pipe
1. ASTM A789/A789M 12.7-1016x 0.5-25.4mm
2. ASTM A790/A790M 10.3-1016x 0.5-36mm
3. API 6L
EFW Pipe
1.ASTM A789/A789M:12.7-323.9x0.5-12.7mm
2:ASTM A790/A790M 10.3-610x0.5-18mm
3.ASTM A928/A928M 10.3--610x 0.5-18mm
Material: UNS S31500 S32304 S31803 S2205 S2760 S2750,S 32205, S 32550, S 32750, S 32760. |
|
|
|
|
|
Related Products
|
|
