 |
BizVerify |
|
| Metals International Limited |
| Verified By : SMR(HK) |
| Verified Date : 2011-03-25 |
|
 |
|
|
|
|
|
|
|
|
|
| DSAW/LSAW Steel Pipe API 5L,AS2885,ISO 3183,DNV OS-F-101 |
|
|
| Model No.︰ | API 5L,ISO 3183 |
| Brand Name︰ | - |
| Country of Origin︰ | China |
| Unit Price︰ | USD $ 1050 / MT |
| Minimum Order︰ | 500 MT |
|
|
|
|
|
|
|
OD
|
W/T
|
|
in
|
mm
|
mm
|
|
16
|
406.4
|
6.4-20
|
|
18
|
457.2
|
6.4-24
|
|
20
|
508.0
|
6.4-28
|
|
22
|
558.8
|
6.4-30
|
|
24
|
609.6
|
6.4-30
|
|
26
|
660.4
|
6.4-35
|
|
28
|
711.2
|
6.4-35
|
|
30
|
762
|
6.4-40
|
|
32
|
812.8
|
6.4-42
|
|
34
|
863.6
|
6.4-42
|
|
36
|
914.4
|
7.4-42
|
|
38
|
965.2
|
7.4-45
|
|
40
|
1016
|
7.4-45
|
|
42
|
1067
|
9.7-48
|
|
44
|
1118
|
9.7-48
|
|
46
|
1168
|
9.7-50
|
|
48
|
1219
|
9.7-50
|
|
52
|
1321
|
9.7-60
|
|
56
|
1422
|
10.5-60
|
|
|
|
|
| Specifications︰ | 1. Line Pipes
API 5L PSL1/PSL 2 Line Pipe: Gr. B X42, X46, X52, X56, X60, X65, X70, X80
ISO 3183 1/2/3 Petroleum and Natural Gas Industries – Steel Pipe for Pipelines-
DNV OS-F101 Submarine Pipeline Systems
DIN 17172 Stahlrohre fur Fernleitungen fur brennbare Flussingkeiten und Gase( Pipe for cross country pipelines for flammable liquid and gas)
AS2885 Pipelines - Gas and liquid petroleum Part 1: Design and Construction
CSA Z245.1 Steel Pipe
BS 3602 Steel Pipe and Tubes for Pressure Proposes Carbon Steel: High Duties.
BS EN 10208-2 Steel Pipes for Pipelines for Combustible Fluids-Technical Delivery Conditions
IPS-M-PI-190 Material And Equipment Standard for Line Pipe
KOC-MP-019 KOC Standard for Submerged-Arc Welded (SAW) Pipe to API 5L
ISO 15156-2 / NACE MR 0175 Petroleum and Natural Gas Industries – Materials for Use in H2S Containing Environments in Oil and Gas Production. Part 2. Cracking resistant Carbon and Low Alloy Steels, and the Use of Cast Irons.
NACE TM 0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in Hydrogen Sulfide (H2S) Environments
NACE TM 0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
DEP 31.40.20.35-Gen Line pipe for non-critical service (amendments/supplements to ISO 3183-1)
DEP 31.40.20.37-Gen Linepipe for critical service (amendments/supplements to ISO 3183-3)
DEP 31.40.40.38-Gen Hydrostatic pressure testing of new pipelines
DEP 31.40.20.35-Gen Line pipe for non-critical service (amendments/supplements to ISO 3183-1)
DEP 31.40.60.11-Gen Pipeline leak detection
DEP 31.40.60.12-Gen Pipeline Repairs (supplements to ANSI/ASME B31.4 and B31.8)
DEP 61.40.20.30-Gen Welding of pipelines and related facilities (amendments/supplements to ANSI/API STD 1104)
DEP 31.40.50.30-Gen Precommissioning of pipelines
KS D 3566 STK 90,400,490,500,540 Carbon Steel Tubes for General Structural Purpose API Spec5A: TUBOS DE PERFURAÇÃO, REVESTIMENTO E BOMBEAMENTO PARA POÇOS PETROLÍFEROS CASING, TUBING, DRILL PIPE.
API Spec5AX: TUBOS DE PERFURAÇÃO, REVESTIMENTO E BOMBEAMENTO PARA POÇOS PETROLÍFEROS COM EXIGÊNCIAS ESPECIAIS (HIGH-STRENGTH CASING,
TUBING, DRILL PIPE).
API Spec5AC: TUBOS DE REVESTIMENTO E DE BOMBEAMENTO PARA POÇOS PETROLÍFEROS, COM PROPRIEDADES RESTRITAS: GRADE C-75, CASING E TUBING.
API Spec5B: ESPECIFICAÇÃO DE ROSCAS, CALIBRES E INSPEÇÃO DE ROSCAS PARA CASING, TUBING E LINE PIPE.
API Spec5L: TUBOS PARA CONDUÇÃO DE PRODUTOS PETROLÍFEROS.
API Spec5LX: TUBOS PARA CONDUÇÃO DE PRODUTOS PETROLÍFEROS COM EXIGÊNCIAS ESPECIAIS
2. Pipe for General Uses
ASTM A134 Electric Fusion-(Arc) Welded Steel Plate Pipe
ASTM A-139 CHIMNEYS AND VENTILATION DUCTS for air and dust filtering systems, and smoke evacuation,PILLARS for ski chair-lifts and bridges
ASTM A155 Electric Fusion Welded Steel Pipe for High Temperature Service
ASTM A671 Electric Fusion Welded Steel Pipe for Atmospheric and Lower Temperature
ASTM A672 Electric Fusion Welded Steel Pipe for High-Pressure Service and Moderate Temperatures
DIN 1626 Geschweisste Stahlrohre; Technische Liefebedingungen; (Fusion Welded Steel Pipe;Technical Specification)
BS 3601 Steel Pipe and Tubes for Pressure Proposes Carbon Steel:Ordinary Duties
BS 7191 All Specification for Weldable Structure Steels for Fixed Offshore Structures
JIS G3457 Electric Arc-Welded Steel Pipe
KS D 3583 SPW 400 Arc Welded Carbon Steel Pipe
3. Structural Pipe
JIS G 3444 STK 90,400,490,500,540 Carbon Steel Tubes for General Structural Purpose
JIS A5525 Steel Pipe Pile
API 2B Fabricated Structural Steel Pipe
ASTM A252 FOUNDATION PILES for soil consolidation, marine wharfs,
AS/NZS 1163 C250/L0, C350/L0,C450/L0 Structural Steel Hollow Sections
AS 2159 Piling-Design and Installation
AS 812 Bored Piles
AS1163 - C350L0
Grade C350L0 has a higher yield strength than grade C250L0, which means that lighter, more economical sections can be used to replace heavier sections in many applications.
Our Grade C350L0 steels are fully compliant with AS 1163 and can be readily processed to Australian/New Zealand Standards and/or industry practice for:
• General, mechanical, piping and structural fabrication
• Rolling/bending member lengths
• Welding
• Galvanizing
• Surface preparation for top coats
• End processing (screwed, swaged)
– for CHS.
Due to the refined chemistry and higher level of working during the coil and tube manufacturing process, C350L0 steel grade is available in the following ATM tubular products:
• CHS
• RHS
• UniRail
• StockRail
• Other sections based on enquiry.
Specifications and Standards
• Minimum Yield Strength: 350 MPa (a measure of how strong the tube is – see Table 3).
• Standard designation: AS 1163 – C350L0 see definition at the end of this Guide).
• Steelmaking process: Fine-grain continuously-cast practice.
• Product manufacture: Cold-forming and high frequency Electric Resistance Welding (ERW) of steel strip. The cold-forming process enhances the strength, hardness and surface finish of the manufactured product.
• Chemical composition: See Table 4 which applies to steelmake cast analysis and finished product analysis.
• Carbon Equivalence (CE): 0.39 – see Table 4 for details.
• Welding Code Steel Type: Type 5 (from Table 4.6.1(B) of AS/NZS 1554.1 and Table 4.5.1(B) in AS/NZS 1554.5).
• Mechanical properties: See Table 3 for tensile test and below for impact test requirements. For cold-flattening tests, AS 1163 requires deformation to 75% of initial tube depth.
• Impact Properties: Satisfies Clauses 15.2 and 16.2 of AS 1163 for Charpy V-Notch impact tests at the test temperature of 0oC (i.e. L0).
Submarine (Offshore) Pipeline System
AS 2885-1:1997
AS 2885-2:2002,
AS 2885-3:2001,
AS 2885-4:2003,
AS/NZS 2885-5:2002,
ASME B31.4:1998,
ASME B31.8:2000,
BS 8010-1:1989,
BS 8010-2.8:1992,
BS 8010-3:1993,
CSA-Z662:2003,
DIN 2470-2:1983,
DNV-OS-F101:2007,
EN 1594:2000,
EN 14161:2003,
ENV 1993-4-3:1999,
ISO 13623:2000,
ISO 3183-3:1999,
NEN 3650-1-K1-K6:2003,
NEN 3650-2-K1-K6:2003,
NHT-R51-00002 03M:2002,
NHT-R51-00016 03M:2002,
NHT-S51-00021 02M:2002, SNiP 2.05.06:1985,
VSN 51-9:1986,
VSN 51-3/2.38:1985
|
| Standard Met︰ | Coating Specifications:
CAN/CSA-Z245.20 External Fusion Bond Epoxy Coating for Steel Pipe
CAN/CSA Z245.21 External Polyethylene Coating for Pipe
DIN 30670 Polyethylene Sheathing of Steel Tubes and of Steel Shaped Fittings
DNV-RP-F106 Factory Applied External Pipeline Coatings For Corrosion Control
EN 10286 Steel tubes and fittings for onshore and offshore pipelines –External three layer extruded polypropylene based coatings.
Polyurethane Coating: BS 5493
AS 3862 External Fusion-Bonded Epoxy Coating for Steel Pipes
AS/NZS 1518 External Extruded High-Density Polyethylene Coating System for Pipes
AS/NZS 1516 Cement Mortar Lining of Pipelines In Situ
AWWA C200-97: Steel Water Pipe-6 In. (150 mm) and Larger
AWWA C203-02: Coal-Tar Protective Coatings & Linings for Steel Water Pipelines, Enamel & Tpae, Hot-pap. (Incl. add. C203a-99)
AWWA C205-00: Cement-Mortar Protective Lining and Coating for Steel Water Pipe- 4 In. (100 mm) and Larger-Shop papli
AWWA C206-97: Field Welding of Steel Water Pipe
AWWA C207-01: Steel Pipe Flanges for Waterworks Service- Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
AWWA C208-01: Dimensions for Fabricated Steel Water Pipe Fittings
AWWA C209-00: Cold-paplied Tpae Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe
AWWA C210: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
AWWA C214-00: Tape Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
AWWA C216-00: Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting
AWWA C217-99: Cold-paplied Tpae Coatings for Ext. Spec. Sect., Conn., and Fittings for Buried/Submerged Steel Water Pipelines
AWWA C218-02: Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
AWWA C219-01: Bolted, Sleeve-Type Couplings for Plain-End Pipe
AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings
AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
ISO/DIS 21809, Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3- layer PE and 3- layer PP)
-Part 2: Fusion-bonded epoxy coatings
IPS-G-TP-335 Material and Construction Standard for Three Layer Polyethylene Coating System |
|
|
| Select Image |
 |
|
|
|
|
|
|
|
|
|
|
|
