|
|
|
|
|
ASTM F1554, ASTM A615/A449 EN 193,ISO 898-1,DIN 931,DIN 529 Anchor Bolts,Nuts
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | - |
| Unit Price︰ | - |
| Minimum Order︰ | - |
|
|
|
|
|
|
|
|
ASTM F1554 Grades
| ASTM F1554 Grade 36 |
Low carbon, 36 ksi yield steel anchor bolts |
| ASTM F1554 Grade 55 |
High strength, low alloy, 55 ksi yield steel anchor bolts |
| ASTM F1554 Grade 105 |
Alloy, heat treated, high strength 105 ksi yield steel anchor bolts |
Supplementary Testing
Supplementary requirements shall apply only when specified in the purchase order or contract.
- S1: Weldable version of the Grade 55 specification. Through chemical composition restrictions and by a carbon equivalency formula, S1 provides assurance of weldability. When S1 is not specified, the Grade 55 material may or may not be weldable.
- S2: Permanent manufacturer’s identification on the end of the anchor bolt that projects from the concrete, in lieu of color coding.
- S3: Permanent grade identification on the end of the anchor bolt that projects from the concrete, in lieu of color coding.
- S4: Charpy Impact requirements at +40⁰F (+5⁰C) for grades 55 and 105. The minimum Charpy V-notch energy requirement is an average of 15ft-lbs for three specimens, with no one specimen falling below 12ft-lbs.
- S5: Charpy Impact requirements at -20⁰F (-29⁰C) for grade 105. The minimum Charpy V-notch energy requirement is an average of 15ft-lbs for three specimens, with no one specimen falling below 12ft-lbs.
ASTM F1554 Mechanical Properties
|
Grade
|
Marking
|
Size inches
|
Tensile, ksi
|
Yield, ksi min
|
Yield, MPa min
|
Elong. % min
|
RA % min
|
|
36
|
AB36 PB BLUE
|
1⁄4 - 4
|
58 - 80
|
36
|
248
|
23
|
40
|
|
55
|
AB55 PB YELLOW
|
1⁄4 - 2
|
75 - 95
|
55
|
380
|
21
|
30
|
|
21⁄4 - 21⁄2
|
75 - 95
|
55
|
380
|
21
|
22
|
|
23⁄4 - 3
|
75 - 95
|
55
|
380
|
21
|
20
|
|
31⁄4 - 4
|
75 - 95
|
55
|
380
|
21
|
18
|
|
105
|
AB105 PB RED
|
1⁄4 - 3
|
125 - 150
|
105
|
724
|
15
|
45
|
|
Stamping of F1554 bolts with manufacturer's identification is a supplemental requirement (S2)
Color coding is required unless the grade is stamped in accordance with supplemental requirement (S3).
When Grade 36 is specified, a weldable Grade 55 may be furnished at the supplier's option.
|
ASTM F1554 Chemical Properties
|
Element
|
Grade 36
|
Grades 55 and 105
|
|
Sizes up to 3/4
|
Sizes over 3/4 to 1-1/2
|
Sizes over 1-1/2 to 4
|
|
Carbon
|
0.26%
|
0.27%
|
0.28%
|
|
|
Manganese
|
*
|
0.60 - 0.90%
|
0.60 - 0.90%
|
|
|
Phosphorus, max
|
0.04%
|
0.04%
|
0.04%
|
0.040%
|
|
Sulfur, max
|
0.05%
|
0.05%
|
0.05%
|
0.050%
|
|
Copper, min (when specified)
|
0.20%
|
0.20%
|
0.20%
|
0.20%
|
|
* Optional with the manufacturer but shall be compatible with weldable steel
|
ASTM F1554 Recommended Hardware
| Grade |
Identification |
Size Inches |
Recommended A563 Nut |
Washer |
| Plain Finish |
Hot-Dip or Mechanical Zinc Coated |
| Grade |
Style |
Grade |
Style |
|
36
|
AB36 PB BLUE
|
1/4 – 1-1/2
|
A
|
Hex
|
A
|
Hex
|
F436
|
|
1-5/8 – 4
|
A
|
Heavy Hex
|
A
|
Heavy Hex
|
|
55
|
AB55 PB YELLOW
|
1/4 – 1-1/2
|
A
|
Hex
|
A
|
Heavy Hex
|
F436
|
|
1-5/8 – 4
|
A
|
Heavy Hex
|
A
|
Heavy Hex
|
|
105
|
AB 105 PB RED
|
1/4 – 1-1/2
|
D1
|
Heavy Hex
|
DH2
|
Heavy Hex
|
F436
|
|
1-5/8 – 3
|
DH2
|
Heavy Hex
|
DH2
|
Heavy Hex
|
|
1 A563 grade D nuts are rarely available. A563 grade DH or A194 grade 2H should be substituted.
2 The availability of A563 grade DH nuts in nominal sizes 1″ and larger is very limited and generally available only on special orders of 50,000 or more. For smaller quantities, ASTM A194 grade 2H should be considered.
|
|
|
|
|
|
| Specifications︰ | ASTM Specifications for Bolt Fasteners
ASTM A193- Alloy steel and stainless steel bolting materials for high temperature or high pressure service.
ASTM A307- Carbon steel bolts and studs, 60,000 psi tensile strength.
A320- Alloy steel and stainless steel bolting materials for low temperature service.
ASTM A325- Structural bolts, steel, heat treated, 120/105 ksi minimum tensile strength.
ASTM A354 Quenched and tempered alloy bolts, studs, and other externally threaded fasteners.
ASTM A449- Quenched and tempered steel bolts and studs for general use.
ASTM A490- Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength.
ASTM F568- Standard for metric bolts, screws and studs that are used in general engineering applications
ASTM F593- Stainless steel bolts, hex cap screws, and studs.
ASTM F1554- Anchor bolts designed to anchor structural supports to concrete foundations.
SAE J429-Mechanical and material requirements for externally threaded fasteners.
ASTM Specifications for Nut Fasteners
ASTM A194- Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service
ASTM A563- Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications
ASTM A594- Standard Specification for Stainless Steel Nuts , Corrosive service applications
SAE J995-Mechanical and material requirements for steel nuts.
ASTM Specifications for Washers
ASTM F436- Specification for Hardened Steel Washers , carbon steel, steel, washers, weathering steel, Hardened steel washers
ASTM F844- Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
ASTM F959- Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
EN14399/DIN6914/DASt021 Construction Bolt Assemblies |
|
|
Product Image
|
|
carbon_steel_foundation_anchor_bolts_hold_down_l_type_hot_dipped_galvanized_grade_10_9-F1554-Gr36-Anchor-Bolts
Anchor-Bolts-9.1.11
ASTM A193 B16 STUD BOLTS
ASTM-F1554-Gr55-Anchor-Bolts
flange-and-bolt
|
|
|
|
|
|
Related Products
|
|
