EN 10025,EN 10149,EN 10028,EN 10083,EN 10208,EN 10225 PIPE FOR GENERAL PURPOSE
|Brand Name︰||API 2B,API 2H, EN 10225 Driving Shoes,Spools
|Country of Origin︰||-
|Unit Price︰||US $ 785 / MT
|Minimum Order︰||10 MT
By this process pipes are manufactured in diameters from 20 to 200 inches, and in wall thicknesses from 0.250 to 4 inches. The process begins with the edge trimming of the steel plate to the required width. The pipe is formed by pyramid rolls to later be welded by the Double Submerged Arc Welding process. In the finishing area, the pipe is inspected and tested to guarantee the quality required by the client.
- Combi piles
- Foundation piles for jetties, offshore platforms and LNG terminals
- Mooring piles, dolphins, etc.
- Foundation piles for bridges and onshore foundations
- Micro piles
- Struts in building pits
API 2B Specification for the Fabrication of Structural Steel Pipe
ASTM A139 CHIMNEYS AND VENTILATION DUCTS for air and dust filtering systems, and smoke evacuation, PILLARS for ski chair-lifts and bridges
ASTM A252 Foudation Piles for soil consolidation, marine wharfs---Grade1, Grade 2, Grade 3
ASTM A500 Cold Formed Welded and Seamless Carbon Steel Steel Structural Tubing in Round and Shapes
AWWA C200 : Steel Water Pipe 6 inches and Larger
AS1579 Arc-Welded Steel Pipes and Fittings for Water and Wastewater
AS 2159 Piling Design and Installation
AS 812 Bored Piles
BS 534 : Steel Pipes and Specials for Water and Sewage
BS 6363 Welded Cold Formed Steel Structural Hollow
CSA G40.21-92-CAN CSA-1992 structural quality steels general instruction no 1-2; and 4
DIN 1626 WELDED CIRCULAR TUBES OF NON ALLOY STEELS WITH SPECIAL QUALITY EQUIREMENTS
DIN 2460 Steel tubes for waterworks services
EN 10219 Cold formed welded structural hollow sections of non-alloy and fine grain steels--S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H
EN 10224 Steel pipes, joints and fittings for the conveyance of aqueous liquids including potable water
EN 10296-1 Welded steel tubes for mechanical and general engineering purposes – TDR. Part 1: Non alloy and alloy steel tubes
IS 4923 Steel tubes for Hollow sections used in structures
JIS G3444 : Carbon Steel Tubes for General Structural Purpose---SS330, SS440, SS490, SPHD, SPHE
JIS G3457 : Arc Welded Carbon Steel Pipes
JIS A5525 : Steel Pipe Piles
KS D 3566 Carbon Steel Tubes for General Structural Purpose- STK 90,400,490,500,540
KS D 3583 Arc Welded Carbon Steel Pipe- SPW 400
KS F4602 Steel Pipes Piles
KS F4605 Steel Pipe Sheet Piles
TIS 427 : Electrically Welded Steel Water Pipes
MWA : Metropolitan Waterworks Authority of Thailand
PWA : Provincial Waterworks Authority of Thailand
RID : Royal Irrigation Department of Thailand
EGAT : Electricity Generating Authority of Thailand
2. Coating Specifications
2.1.1 External Epoxy Coating
CAN/CSA-Z245.20 Standard for External Fusion Bond Epoxy Coating for Steel Pipe
AWWA C210 Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
AWWA C213 Standard for Fusion Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines.
NACE RP0394 – National Association of Corrosion Engineers Standard Recommended Practice, Application, Performance, and Quality Control of Plant Applied, Fusion Bonded Epoxy External Pipe Coating.
NACPA 12-78 – National Association of Pipe Coating Applicators External Application Procedure for Plant Applied fusion Bonded Epoxy (FBE) to Steel Pipe.
2.1.2 Polyethylene Coating
CAN/CSA Z245.21 External Polyethylene Coating for Pipe
DIN 30670 Polyethylene Sheathing of Steel Tubes and of Steel Shaped Fittings
NFA 49-710 External Three-Layer Polyethylene Based Coating, Application by Extrusion
AS/NZS 1518 External Extruded High-Density Polyethylene Coating System for Pipes
UNI 9099-DIN 30670 Polyethylene Coating Applied by Extrusion
2.1.3 Polypropylene Coating
DIN30678 Polypropylene Sheathing of Steel Tubes and of Steel Shaped Fittings
EN 10286 Steel tubes and fittings for onshore and offshore pipelines –External three layer extruded polypropylene based coatings.
NFA 49-711 External Three-Layer Polypropylene Based Coating, Application by Extrusion
09-SAMSS-114 Shop-Applied Extruded, Three-Layer Polypropylene External Coatings for Line Pipe
2.1.4 Polyurethane Coating
AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
BS 5493- Polyurethane Coating
DIN 30677.2 polyurethane Insulation of the fittings
EN 10290- External Liquid Applied Polyurethane Coatings
2.1.5 Polyolefin Coating
AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
AWWA C216-00 Standard for Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting for the Steel Water Pipelines
AWWA C224 - 01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings
AWWA C225 - 03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
2.1.6 Tape Coating
AWWA C209-00: Standard for Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
AWWA C214-00 Standard for Tape Coating Systems for the Exterior of the Steel Water Pipelines
AWWA C217-99 Standard for Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coatings for the Exterior for Special Sections, Connections, and Fittings for Buried/Submerged Steel Water Pipelines
AWWA C218-02 Standard for Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings
2.1.7 Bitumen Coating
DIN 30673 Bitumen coatings and linings for steel pipes, fittings and vessels.
2.1.8 Coal-Tar Enamel Coating
AWWA C-203 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines-Enamel and Tape-Hot-Applied
AWWA C205 Cement Mortar Protective Lining and Coating for Steel Water Pipe - 4 inch (100 mm) and Larger- Shop Applied
2.1.10 Marine Coating
EN ISO 12944:1998 – Paints & Varnishes – Corrosion Protection of Steel Structures by protective paint system (parts 1 – 8)
ISO 20340:2009 Paints and varnishes – Performance requirements for protective paint systems for offshore and related structures
ISO 15741 Paints and varnishes-Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases
2.2. Internal Coating
2.2.1 Epoxy Lining
AWWA C210: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
2.2.2 Bitumen Lining
DIN 30673 Bitumen coatings and linings for steel pipes, fittings and vessels
UNI-ISO 5256/87 STANDARD-BITUMEN COATING
2.2.3 Cement Mortar Lining
AS/NZS 1516 Cement Mortar Lining of Pipelines In Situ
AWWA C203-02: Coal-Tar Protective Coatings & Linings for Steel Water Pipelines, Enamel & Tape, Hot-pap. (Incl. add. C203a-99)
AWWA C205-00: Cement-Mortar Protective Lining and Coating for Steel Water Pipe- 4 In. (100 mm) and Larger-Shop application
AWWA C602 Standard for Cement-Mortar Lining of Water Pipelines - 4 inch (100 mm) and Larger - In Place
2.3Coating Material Applied:
3M: SK 134, SK6233, SK6352 Toughkote, SK 314, SK 323, SK 206N, SK 226N, SK 6251 DualKote SK-6171, SK 206P, SK226P,
3M Internal Coatings: Coupon EP2306HP
DuPont: 7-2500, 7-2501, 7-2502, 7-2508, 7-2514, 7-2803, 7-2504 Nap Gard Gold 7-2504, Nap Rock: 7-2610, 7-2617 FBE Powders
DuPont: Repair Kits; 7-1631, 7-1677, 7-1862, 7-1851
DuPont Internal Coatings: 7-0008, 7-0010, 7-0014, 7-0009SGR, 7-0009LGR, 7-2530, 7-2534, 7-2509
Akzo Nobel: FBE - Fusion Bond Epoxy
Internline 876 Seal Coat
Denso: 7200, 7900 High Service Temperature Coatings
Internal Liquid Epoxy: Powercrete Superflow
Tubular piles are tubular pipes used for piling purposes,which are also called steel piles,piping tubes,or tubular piling. Tubular piles are normally large diameter piles because bigger bending moment are required in lots of cases.
Tubular piling are available in numerous European and US steel grades and can be coated on request and are provided with C9 connectors. Steel piles are the main retaining elements of the combined wall, carrying horizontal loads from soil and water pressures and vertical foundation loads. The intermediary Z-type sheet piles transfer horizontal loads to the tubular piles.Piling tubes are manufactured in a range of materials, from standard carbon steel to high tensile steel, and in all thicknesses to suit specified design. Our piling designs are well proven in quay walls and as the backbones of floating structures. Wider applications include foundation works and construction pipes, industrial pipeline networks, communications infrastructure, and machinery.
The tubular combined wall not only service as the retaining wall member, resisting horizontal loads, but also serve as bearing pile which resist vertical loads. The OZ sheet pile can be shorter than the tubular piles and only have the functions of earth retaining and load transfer. Nowadays the interlocks used in the combined piles have many choices on the market, C9 C14 are the most traditional sheet piling accessory.Further fabrications, like piling shoes,lifting ligs, weld beads, beveled ends, corner sections, paintings...etc we can all do in our workshops.SGS or BV Inspection report is normally supplied.
Ø With our pipe pile mill strategically located near the port and our strong steel pile production ability, No limit on tubular pile dimensions, This is especially important for deep foundations,quay wall, cofferdam,Jetty construction. The biggest tubular pipes we have produced, length up to 100m,diameter up to 3m.Any steel grade,X70 or S460 or A690,as long as you name it, we will produce for your steel piles. Our SSAW pipe machines can produce up to 26mm thickness pipe piling, our LSAW machines can produce up to 80mm thickness piling pipes.
Ø We have been in the steel piling industry for over 15 years, and we are in good contact with numerous sheet piling contractors, the big construction companies in the ENR list, design institutes etc, we know your needs and will fulfill it perfectly.
Ø Our steel piling factory will produce the required sheet piles sizes, and corner sections as well. So that we will ship with tubular piles in one shipment, you just need to install them at jobsites.
Ø Further fabrications, like piling shoes, lifting ligs, weld beads, beveled
ends, corner sections, paintings...etc we can all do in our workshops.SGS or BV Inspection report is normally supplied.
Our inhouse painting facilities allows for any kind of anti-corrosion protection: Painting, Petrolatum Tapes, Galvanizing.
Any Complex Fabrications
Sheet pile interlocks
Factory made L&T clutch
L&T clutch to connect pipes
Small pipe connectors
Sheet pile welded on pipes
Pipe driving shoes
For floating fenders
For pipe-pipe combiwall
Tubular Pile Classifications
Pipe piles are produced from different steel grade for wide applications, for
example, foundation pipes, king pile, monopile, bearing pile, pipe pile wall,
slope stabilization, pipelines, deep foundation, and struts etc. Depending on
the technology, tubular pipe can be classified as:Spiral Submerged arc Welding pipe pile (SSAW steel pipe)
Spiral steel pipe pile is most frequently used with sheet piles to form tubular combined wall because SSAW pipes can be easily produced in very long length without extra welding and in very big diameters. Spiral submerged arc welding pipes are the ideal options for pipe pile wall,steel pipe piles, with steel interlock for clutch to connect two adjacent pipe piles. Spiral welded tubular pipes are produced from steel coils, welded both internally and externally. The width of steel coils used for steel pipe sheet piles can be varied, but in API standard, the material width should be from 80% of the OD to 300% of OD) Pipe shoes are normally welded to piling pipe due to driving considerations. Weld bead can be applied inside. In lots of cases, spiral piling piles are painted for pipe pile walls.
Longitudinally Submerged arc Welding pipe pile (LSAW steel pipe)
LSAW pipe piles are produced from steel plates, so the single steel pipe pile length can be maximum 16m without extra splicing. While Long welded pipes can be very thick, up to 100mm.Almost all pile shoes are longitudinal pipes.
Longitudinal pipes can form with heavy pipe pile wall, with clutches, shear
rings, and other fabricated components. These steel pipes are typically used in pipelines for liquid or gas or oil and petroleum casings. LSAW pipe pile can also be used as king piles and steel pipe piling.
Pipe rolling is a manufacturing process that produces arc and curve shaped metal pipes. Some of the equipment used in this process include brake presses, box and pan brakes among other specialized machinery. Metal pipes created by this process are used to make rectangular ductwork and electrical enclosures.
In pipe rolling, a sheet of metal is positioned over a die block, which presses the sheet to form certain shapes. The sheet should be able to withstand tensile and compressive stresses. When sheets of metal are bent, they will spring back to their original positions. This means they should be bent at a certain angle to achieve the desired bend. The metal spring back is determined by the material and type of forming. Bending stretches the length of sheet metals to achieve a specific bend radius. The dies used as well as material thickness and properties determine this radius.
Types of Pipe Rolling Processes
There are three common pipe rolling processes each defined by the material thickness and end tool position. The three processes include bottoming, air bending and coining. Tools used in these processes are configured in a nearly identical pattern.
The tools include a die with a radiused tip to locate the inside profile of the metal bend. The tip of the die is called a punch. The punch is normally attached to the ram of a machine by clamps, which will produce the bending force. The dies are located under the material on the machine bed.
This pipe rolling method forms materials by pressing a punch into a metal sheet forming a V-die. The distance between the punch and side wall of the V-die is greater than the thickness of the material. Air bending uses smaller equipment than other pipe rolling methods because it requires less bend force.
The shape formed in the bottom die may either be V-shaped or have a square opening. Sets of top and bottom dies are made for each product produced in the press. Some of the tools used in major manufacturing processes are adjustable. This allows manufacturers to use different press-stroke depths to produce varying product profiles. Air bending is a flexible pipe rolling process because it allows different materials to be bent in varying angles.
The downside to air bending is that it is not as precise as other pipe rolling methods because the sheet does not come into full contact with the die. This is a significant factor because stroke depth must be accurate to avoid defects on parts produced.
In this process, metal sheets are forced against the bottom tool’s V opening. This process does not use U-shaped openings. Space is created between the sheet and V opening. This pipe rolling technique has various advantages, including greater accuracy and less spring back. But the disadvantage of this pipe rolling technique is that it requires different sets of tools for each bend angle, material and sheet thickness. However, this is the preferred pipe rolling method for many manufacturers.
In this process, the top tool forces the metal sheet into a bottom die with 5-30 times the force used in air bending. This force causes permanent deformation of the metal sheet eliminating spring back. Coining is a highly accurate, but sometimes expensive, pipe rolling technique.
Other pipe rolling processes include three point bending, folding, rotary bending, roll bending and wiping. Common materials used with these pipe-rolling processes include new plastic materials, aluminum and mild steel.
Steel Pipe Pile Walls
Steel pipe pile walls consists of a steel pipe and clutches welded on either side of the steel pipe. One SPSP is connected to the next one by interlocking their clutches. The most commonly used clutches are the P-P, P-T and L-T types.
Steel pipe piles can also be joined into continuous retaining walls by connecting them with conventional sheet piles as intermediate sections. These combined walls have enhanced resistance to vertical and horizontal loads compared to the conventional sheet pile sections. They can be used as quay walls, breakwaters, temporary cofferdams, retaining walls, bridge foundations, and other various civil engineering structures.
Steel pipe piles can be reinforced with pile shoes according to the specified bearing capacity and ground conditions.
Inside / Outside fit cutting shoes
H Pile Points
H Pile Stiffeners
Back Up Rings
Rebar for cast in place pile
ERW Pipe Piling
Electric Resistance Weld (ERW) pipe is manufactured through individual sheets or from rolls of skelp. It is normally produced in sizes from 2 3/8" to 24".
DSAW Pipe Piling
Double Submerged Arc Weld pipe (DSAW) is created through a welding process in which the welding arc is immersed in flux at the time of welding. Double welds (both inside and outside the pipe) are required to manufacture this pipe, and generally each weld is completed separately. DSAW pipe is normally produced in sizes from 24” through 56” OD and wall thicknesses from .312" through 2".
Spiralweld Pipe has a joint running along it's entire length in a spiral form. Due to the manufacturing process, a wide variety of diameters can be produced. The length range is infinite and is determined only by the customer's transportation budget.
ACCESSORIES | Pipe Piling
A chill ring includes a cylindrical non-consumable base metal ring having an outside diameter sized to fit adequately inside the diameter of the pipe end to be welded.
Conical points are used to push the earth aside and maintain grinding. On rough surfaces, the point distributes the load around the entire pipe, rather than focusing the shock on only a section.
A open-end cutting shoe is an exceptionally tough, heat-treated cast steel shoe with a ledge to ease driving. Use of a cutting shoe protects the pipe end and makes it possible to use a thinner pipe.
Pipe caps are available in all standard sizes ranging from 8 5/8" to 72".
Pipe piling splicers are available in all pipe sizes. Pipe splicers help ease alignment of pipe and drive it with no welding required.
Options and Accessories
Interior and exterior weld beading
Lifting holes, shear rings & end covers
Additional modifications (brackets, tongue plates etc) also available
Tubular Steel Pile Accessories
Structural Tie Rods
Hot Formed Clutches
Pile Fabrication for Combi-walls
Splicing and Fabrication to Full Engineered Length
1. Standards for Fabrication :-
- API American Petroleum Institute
- ASTM A134 Electric Arc Welded Steel Pipes
- ASTM A252 Welded Steel Pipe Piles
- AWWA C200 Steel Water Pipes 6 inches and Larger
- AWWA C207 Steel Pipe Flanges
- AWWA C208 Dimensions for Fabricated Steel Water Pipe Fittings
- BS 534 Steel Pipes, Joints and Specials for Water and Sewage
- BS 3601 Steel Pipes and Tubes for Pressure Purposes
- JIS G 3444 Carbon Steel Tubes for Gereral Structural Purposes
- JIS G 3451 Fittings of Coating Steel Pipes for Water Service
- JIS G 3457 Arc Welded Carbon Steel Pipes
- JIS A 5525 Steel Pipe Piles
- MWA Metropolitan Waterworks Authority (Thailand)
- PWA Provincial Waterworks Authority (Thailand)
- TIS 427 Thai Industrial Standard for Electrically Welded Steel Water Pipe
- Others As On Request
2. Standards for Inside Coating :-
- AWWA C205 Cement Mortar Lining
- AWWA C210 Liquid Epoxy Coating
- BS 534 Bitumen Lining
- JWWA K115 Coal Tar Epoxy Coating
- Others As On Request
3. Standards for Outside Coating :-
- AWWA C203 Coating of Coal Tar Primer / Coal Tar Enamel / Fibreglass Mat / Coal Tar Enamel / Glass-Fibre Felt / Whitewash
- AWWA C209 Polyethylene Tape Coating for Fittings
- AWWA C210 Liquid Epoxy Coating
- AWWA C214 Polyethylene Tape Coating for Steel Pipes
- BS 534 Coating of Bitumen Primer / Bitumen Enamel / Fibreglass Mat / Bitumen Enamel / Glass-Fibre Felt / Whitewash
- JWWA K115 Coal Tar Epoxy Coating
- Others As On Request
4. Standards for Steel Material (Hot Rolled Steel Coils And Plates) to Fabricate Steel Pipes and Fittings :-
- ASTM A36 / A36M
- ASTM A283 Grade C, D
- ASTM A570 Grade 30, 33, 36, 40, 45, 50
- ASTM A572 Grade 42, 50
- BS 4360 Grade 43A, 50B
- JIS G 3101 Grade SS400, SS490
- JIS G 3106 Grade SM400, SM490
|Standard Met︰||Offshore products
Steel pipes and cones for Legs, Bracings, Piles and Caissons
Pre-fabricated Bracings, including profiling
Pre-fabricated Sleeves and Conductor Guides
Complete Monopiles and Transition Pieces*
Piles for Jackets and Tripods*
Point-to-Point Construction Service
Installation tools and equipment (Followers, Spreader Bars, Ballast Weights etc.)
Riser Pipes and Bends including all kinds of coatings
SUCTION PILES+SUCTION JACKETS