NOTES: THE CIRCUMFERRIENTIAL WELDED PIPE LENGTH CAN BE 100 METERS.
1.1 Line Pipes
API 5L PSL1/PSL 2 Line Pipe: Gr. B X42, X46, X52, X56, X60, X65, X70, X80/BM.X42M,X46M,X52M,X60M,X65M,X70,X80M
ISO 3183-1/2 Petroleum and Natural Gas Industries-Steel Pipe for Pipelines Transportation System-L240M,L290M,L320M,L360M,L390M,L415M,L450M,L485M,L555M,L690M
ISO 3183-3 Petroleum and Natural Gas Industries Steel Pipe for Pipelines Transportation System -L245NC / L245NCS,L290NC / L290NCS, L360NC / L360NCS, L290MC / L290MCS, L360MC / L360MCS, L415MC / L415MCS, L450MC / L450MCS, L485MC / L485MCS, L555MC
AS2885 Pipelines-Gas and liquid petroleum Part 1: Design and Construction
AS 1163 Structural Steel Hollow Section--C250,C250L0,C350,C350L0,C450,C450L0
ASM B31.11-2002 Slurry Transportation Piping Systems
BS 3601-1 Carbon steel pipes and tubes with specified room temperature properties for pressure purposes
BS 3602-2 Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties. Part 2: Submerged arc welded tubes
BS 6323 Seamless and welded steel tubes for automobile mechanical and general engineering purposes. Part 1: General requirements. Part 7: Specific requirements for submerged arc welded steel tube
CSA Z245.1 Steel Pipe- Category I, II, III-241,290,359,386,414,448,483,550,620,690,825
DIN 2470-1 Steel gas pipelines for permissible service pressures up to 16 bar
DIN 2470-2 Steel gas pipelines for permissible service pressures exceeding 16 bar
EN 10208-1:2009, Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A-L210GA,L235GA,L245GA,L290GA, L360GA
EN 10208-2:2009, Steel pipes for pipelines for combustible fluids – Technical delivery conditions – Part 2: Pipes of requirement class B-L245MB,L290MB,L320MB,L360MB,L390MB,L415MB,L450MB, L485MB,L555MB
EN 10208-3 Non alloy and alloy fine grain steel tubes
EN 10217-1/3 Welded steel tubes for pressure purposes
EN10217-5 Welded Steel Tubes for Pressure Purposes-Technical Delivery Conditions-Part 5: Submerged Arc Welded Non-Alloy and Allow Steel Tubes with Specified Elevated Temperature Properties
EN 12007-3:2000, Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel.
EN ISO 21329:2004, Petroleum and natural gas industries - Pipeline transportation systems - Testing procedures for mechanical connections (ISO 21329:2004).
EEMUA Publ 203:2004, Guide to the Application of ISO 3183 Parts 2 (1996) and 3 (1999) Petroleum and Natural Gas Industries - Steel Pipes for Pipelines - Technical Delivery Conditions.
NACE MR 0175/ISO 15156-2 Petroleum and Natural Gas Industries – Materials for Use in H2S Containing Environments in Oil and Gas Production. Part 2. Cracking resistant Carbon and Low Alloy Steels, and the Use of Cast Irons.
NACE TM 0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in Hydrogen Sulfide (H2S) Environments
NACE TM 0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
DEP 184.108.40.206-Gen LINEPIPE FOR USE IN OIL AND GAS OPERATIONS UNDER NON-SOUR CONDITIONS(AMENDMENTS/SUPPLEMENTS TO API SPEC 5L)
DEP 220.127.116.11-Gen LINEPIPE FOR USE IN OIL AND GAS OPERATIONS UNDER SOUR CONDITIONS(AMENDMENTS/SUPPLEMENTS TO API SPEC 5L)
DEP 18.104.22.168-Gen Line pipe for non-critical service (amendments/supplements to ISO 3183-1)
DEP 22.214.171.124-Gen Linepipe for critical service (amendments/supplements to ISO 3183-3)
DEP 126.96.36.199-Gen Hydrostatic pressure testing of new pipelines
DEP 188.8.131.52-Gen Pipeline leak detection
DEP 184.108.40.206-Gen Pipeline Repairs (supplements to ANSI/ASME B31.4 and B31.8)
DEP 220.127.116.11-Gen Welding of pipelines and related facilities (amendments/supplements to ANSI/API STD 1104)
DEP 18.104.22.168-Gen Precommissioning of pipelines
DGS-9510-001 rev.0 SUBMERGED ARC WELDED PIPES
GOST 20295-85, Steel welded pipes for main gas-and-oil pipelines Specifications(530-820mm)- K34, K38, K42, K50, K52, K55, K60,K65
GO R 52079:2003, Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications.
GOST R ISO 10124:1999, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections.
GOST R ISO 10332:1999, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the verification of hydraulic leak-tightness.
GOST R ISO 10543:1999, Seamless and hot-stretch-reduced welded steel tubes for pressure purposes - Full peripheral ultrasonic thickness testing.
GOST R ISO 3183:2010, Petroleum and natural gas industries - Steel pipe for pipeline transportation systems. - 2nd edition.
IPS-M-PI-190 Material And Equipment Standard for Line Pipe
IGS-MS-PL-001 Specifications for Pipes, Electric Resistance Welded Type(ERW)
KOC-MP-018 KOC Standard for Seamless Pipe to API 5L
KOC-MP-019 KOC Standard for Submerged-Arc Welded (SAW) Pipe to API 5L
KOC-MS-001 Part 1 Kuwait Material Specification Line Pipe for Sour Service
NFA 49-211/ NFA 49-411 TUE 220,TUE 250,TUE 275,TUE 290,TUE 320,TUE 360,TUE 415,TUE 450
NRF-001-Pemex-2007 Steel Piping for Hydrocarbon Collections and Transportation
NRF-001-PEMEX-2007 TUBERíA DE ACERO PARA RECOLECCIóN Y TRANSPORTE DE
RP 43-1 Onshore Transmission Pipelines to BS 8010
01-SAMSS-332/01-SAMSS-333 High frequency welded line pipe
01-SAMSS-035 and 01-SAMSS-038 Submerged-arc welded line pipe per
TOTAL GS EP PLR 202 Fabrication of longitudinally submerged arc welded pipes for
pipelines (sweet service)
TOTAL-GS-PLR-212 REV.04 Fabrication of Longitudinally Submerged Arc Welded Pipes for Pipelines Intermediate and Sever Sour Service
1.2. Pipe for General and Structural Uses
API 2B Specification for the Fabrication of Structural Steel Pipe
ASTM A134 Electric-Fusion (Arc)-Welded straight seam or spiral seam welding, in nominal diameter of 16 inches (406.4mm) [NPS 16]and over, with wall thicknesses up to 3/4 in. (19.0 mm), inclusive.
ASTM A139 Electric-Fusion (Arc)-Welded straight-seam or helical-seam steel pipe. Pipes are manufactured in nominal diameters of 4 inches and larger with nominal (average) wall thickness of 1.0 in. [25.4 mm] and less.
ASTM A155 Electric Fusion Welded Steel Pipe for High Temperature Service
ASTM A252 FOUNDATION PILES for soil consolidation, marine wharfs
ASTM A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM 572 Gr.50, EH36TM, DH36, DH36TMZ
ASTM A671 All Electric-Fusion-Welded Steel Pipe for Atmospheric & Low Temperature
ASTM A672 All Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperature
ASTM A691 Carbon and Alloy Steel Pipe, Electric-Fusion Welded for High Pressure Service at High Temperatures
ASME Sec VIII DIV1 UCS-56 Post Weld Heat Treatment for Pressure Vessels Constructed Carbon
of Low Alloy Steels
Sec VIII DIV1 UNF-56 Post Weld Heat Treatment of Nonferrous Materials
Sec VIII DIV1 UHA-32 Post Weld Heat Treatment for Pressure Vessels Constructed
of High Alloy Steels
AWWA C200-97: Steel Water Pipe-6 In. (150 mm) and Larger
AS1579 Arc-Welded Steel Pipes and Fittings for Water and Wastewater
AS 2159 Piling Design and Installation
AS 812 Bored Piles
BS 2059 Part I & II Gr. 320, Gr. 360
BS 3601 Steel Pipe and Tubes for Pressure Proposes Carbon Steel: Ordinary Duties- Gr. 360,Gr. 430,
BS 7191 All Specification for Weldable Structure Steels for Fixed Offshore Structures
DIN 1615 Welded circular tubes of non-alloy steel without special quality requirements.
DIN 1626 Welded circular tubes of non-alloy steel with special quality requirements-St. 37.0,St44.0, St.52.0
DIN 1628 Welded circular tubes of non-alloy steel with very high quality requirements- St. 37.4
DIN 2458 Plain end welded steel tubes, dimensions and conventional masses per unit length- DIN 2470 Part 1 St. 37.0,St44.0, St.52.0
DIN 2460 Steel tubes for waterworks services DIN 2460
DIN 17120 Welded structural steel circular tubes for structural engineering purposes
DIN 17172 Steel pipes for pipelines for the transport of combustion fluids and gases--DIN 2470 Part II St. E210-7, E240-7,E290-7, St. E 320-7,St.E 360-7
DIN 17174 Welded circular steel tubes for low temperatures
DIN 17177 St. 37.8, St. 42.8
EN 10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Part 1: Technical delivery requirements.
EN 10210 S275, S355 Hot Finished Structural Hollow Section of Non-Alloy and Fine Grain Structural Steels
EN 10224 Steel pipes, joints and fittings for the conveyance of aqueous liquids including potable water
EN 10296-1 Welded steel tubes for mechanical and general engineering purposes – TDR. Part 1: Non alloy and alloy steel tubes
JIS G 3444 Carbon Steel Tubes for General Structural Purpose- STK 90,400,490,500,540
JIS G 3457 Arc Welded Carbon Steel Pipe- STPY 400
JIS A5525 Steel Pipe Pile
KS D 3566 Carbon Steel Tubes for General Structural Purpose- STK 90,400,490,500,540
KS D 3583 Arc Welded Carbon Steel Pipe- SPW 400
KS F4602 Steel Pipes Piles
KS F4605 Steel Pipe Sheet Piles
1.3.Submarine (Offshore) Pipeline System
DNV OS-F101 Submarine Pipeline Systems-SAWL 245,SAWL290,SAWL 320,SAWL 360,SAWL 415,SAWL 450,SAWL 485,SAWL 555,
2. Coating Specifications
2.1.1 External Epoxy Coating
CAN/CSA-Z245.20 Standard for External Fusion Bond Epoxy Coating for Steel Pipe
AS 3862 Standard Specification for External Fusion-Bonded Epoxy Coating for Steel Pipes
API RP 5L9 Recommended Practice for External Fusion Bonded Epoxy Coating of Line Pipe
AWWA C210 Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
AWWA C213 Standard for Fusion Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines.
DEP 22.214.171.124-Gen TECHNICAL SPECIFICATION FOR EXTERNAL FUSION-BONDED EPOXY POWDER COATINGFOR LINE PIPE
NFA 49-710 Standard Specification for External FBE layered Coating
ISO 21809-2:2007, Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems-Part 2: Fusion-bonded epoxy coatings
NACE RP0394 – National Association of Corrosion Engineers Standard Recommended Practice, Application, Performance, and Quality Control of Plant Applied, Fusion Bonded Epoxy External Pipe Coating.
NACPA 12-78 – National Association of Pipe Coating Applicators External Application Procedure for Plant Applied fusion Bonded Epoxy (FBE) to Steel Pipe.
SAES-H-002 Internal and External Coatings for Steel Pipelines and Piping
09-SAMSS-089 Shop-Applied External FBE Coating
09-SAMSS-091 Shop-Applied Internal FBE Coatings
2.1.2 Polyethylene Coating
CAN/CSA Z245.21 External Polyethylene Coating for Pipe
DIN 30670 Polyethylene Sheathing of Steel Tubes and of Steel Shaped Fittings
NFA 49-710 External Three-Layer Polyethylene Based Coating, Application by Extrusion
DNV-RP-F106 Factory Applied External Pipeline Coatings For Corrosion Control
AS/NZS 1518 External Extruded High-Density Polyethylene Coating System for Pipes
ISO/DIS 21809-1 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3- layer PE and 3- layer PP)
ISO 21809-4:2009, Petroleum and natural gas industries -External coatings for buried or submerged pipelines used in pipeline transportation systems-Part 4: Polyethylene Coatings (2-layer PE)
DEP 126.96.36.199-Gen. TECHNICAL SPECIFICATION FOR EXTERNAL POLYETHYLENE AND POLYPROPYLENE COATING FOR LINE PIPE
GOST 9.602 or TOR registered by “Gazprom” and “TransNeft” SC-Tubes with insulation of coal-water slurry
IPS-G-TP-335 Material and Construction Standard for Three Layer Polyethylene Coating System
NFA 49-710 External 3 layer Polyethylene Coating
PETROBRAS' ET-200.03 Engineering Specification ("Piping Materials for Production and Process Facilities") for using low density linear polyethylene in carbon steel piping, as to appendix 13 of such specification.
09-SAMSS-113 External Renovation Coating for Buried Pipelines and Piping (APCS-113)
UNI 9099-DIN 30670 Polyethylene Coating Applied by Extrusion
2.1.3 Polypropylene Coating
DIN30678 Polypropylene Sheathing of Steel Tubes and of Steel Shaped Fittings
EN 10286 Steel tubes and fittings for onshore and offshore pipelines –External three layer extruded polypropylene based coatings.
NFA 49-711 External Three-Layer Polypropylene Based Coating, Application by Extrusion
09-SAMSS-114 Shop-Applied Extruded, Three-Layer Polypropylene External Coatings for Line Pipe
2.1.4 Polyurethane Coating
AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
BS 5493- Polyurethane Coating
DIN 30677.2 polyurethane Insulation of the fittings
EN 10290- External Liquid Applied Polyurethane Coatings
2.1.5 Polyolefin Coating
AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
AWWA C216-00 Standard for Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting for the Steel Water Pipelines
AWWA C224 - 01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings
AWWA C225 - 03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
2.1.6 Tape Coating
ISO 21809-3:2008, Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems-Part 3: Field joint coatings
AWWA C209-00: Standard for Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
AWWA C214-00 Standard for Tape Coating Systems for the Exterior of the Steel Water Pipelines
AWWA C217-99 Standard for Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coatings for the Exterior for Special Sections, Connections, and Fittings for Buried/Submerged Steel Water Pipelines
AWWA C218-02 Standard for Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings
EN 12068 - DIN 30672 STANDARD-POLYETHYLENE SELF ADHESIVE TAPES
2.1.7 Bitumen Coating
DIN 30673 Bitumen coatings and linings for steel pipes, fittings and vessels.
2.1.8 Coal-Tar Enamel Coating
AWWA C-203 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines-Enamel and Tape-Hot-Applied
AWWA C205 Cement Mortar Protective Lining and Coating for Steel Water Pipe - 4 inch (100 mm) and Larger- Shop Applied
2.1.9 Concrete Weighted Coating
DNV-OS-F101 Submarine Pipeline System
ASTM C171 Specification for Sheet Material for Coating Concrete
BS EN 12620 Aggregates for Concrete
ISO 21809-5:2009, Petroleum and natural gas industries -External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5:External concrete coating.
ASTM C42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C642 Standard Test Method for Specific Gravity, Absorption and Voids in Hardened Concrete
ASTM C87 Standard Test Method for Effect of Impurities in Fine Aggregate on Strength of Mortar BS 1881 Methods of Testing Concrete
BS 3148 Methods of Test for Water for Making Concrete
BS 4482 Hard Drawn Mild Steel Wire for the Reinforcement of Concrete
BS 4483 Specification for Steel Fabric for the Reinforcement of Concrete
BS 4449 Specification for Carbon Steel Bars for Reinforcement of Concrete
ISO 4012 Determination of Compressive Strength of Test Specimen
2.1.10 Marine Coating
EN ISO 12944:1998 – Paints & Varnishes – Corrosion Protection of Steel Structures by protective paint system (parts 1 – 8)
ISO 20340:2009 Paints and varnishes – Performance requirements for protective paint systems for offshore and related structures
ISO 15741 Paints and varnishes-Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases
2.2.1 Epoxy Lining
API RP 5L2 Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service.
API RP 5L7 Recommended Practice for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe
AWWA C210: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
NFA 49-709 Internal can be epoxy 80 microns
TS EN 10289
NFA 49708 Recommended Practice for Internal Coating of Line Pipe