Company Profile
Products
Welded Pipe
Tubular Piles
Seamless Pipe
Stainless Pipe
OCTG
Ductile Iron Pipe
Steel Plate/Coil
Bar,Rod & Wire
Fin Tube
Copper Tube
Plastic Pipe
Pipe Fittings
Fastener
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE

  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • DIN 2632 PN 10 Weld Neck Flanges,DIN 2632 Flange
  • Threaded Flange
  • API 6A 6BX Flange,API 10000PSI(69.0MPA) TYPE 6BX Welding Neck RTJ Flange,LWN(LONG WELD NECK) FLANGE
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • STEEL BACKING FLANGES, AS 2129 TABLE D backing Flange,EN1092-1 steel plate backing flanges
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • ASME B16.47 RING JOINT FLANGES
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • DIN 2527 FLANGE PACKAGING
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • Flange-production
  • Flange-test-equipment
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • Self Reinforced Weldneck FLANGE-LATHING
  • ASME B16.5,DIN 2527,EN 1092-1,ISO 15590-3,JIS B2220 (NPS1/2-NPS24) FLANGE
  • 1/4"~24" FLANGE SIZE RANGE
Model No.︰DN15-DN5000
Brand Name︰MIL
Country of Origin︰China
Unit Price︰-
Minimum Order︰-
Share on:

 Total 28 Related Items 
Prev1415161718Next

Product Description

Flanges

Slip On Flanges (SORF)

Slip on flanges are bored slightly larger than the outer Diameter of the matching pipe. The pipe slips into the flange prior to welding both inside and outside to prevent leaks. 

Weld Neck Flanges (WNRF)

Weld Neck Flanges (WNRF) is designed in line with international quality standard. These flanges come with welding neck, which is hot formed from a circular section of steel plate having a small co-axial hole in the center. 

Socket Weld Flanges (SWRF)

Socket Weld Flange (SWRF) is a device, which is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. The stainless steel socket weld flanges allow a pipe to be disconnected and reconnected with ease

Blind Flanges (BLRF)

Blind Flange (BLRF) is used to close the end of the pipe, valves, pressure vessel openings and other channels where one end needs to be blanked off. These are developed using quality stainless steel and are widely used in paper and pulp industries. 

Lapped Joint Flanges

Lapped Joint Flanges are mainly used in those piping, which is fitted with the lapped pipe or with the stub end lap joint flange. This arrangement is perfect for systems that require dismantling for inspection and cleaning. 

Screwed Flange is available in stainless steel, carbon steel and nickel alloy material. Designed in conformation with international quality standard, our range finds a wide application in power plant, chemical & food and drilling & well building industries. We also provide screwed flange as per the drawings and specifications provided by the clients.

Specifications :
Stainless steel : ASTM A 182, A 240

Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,

Duplex stainless steel : UNS S31803, 2205,

Super duplex stainless steel : UNS S32750

Carbon steel : ASTM A 105, ASTM A 181

Alloy steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel alloys : Monel 400 & 500, inconel 600 & 625, incolloy 800, 825, hastelloy C22,C276

Copper alloys : Copper, brass & gunmetal

Size : 1/8" NB TO 48"NB

Class : 150, 300, 400, 600, 900, 1500 & 2500

Standards :
•ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
•DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
•B.S: BS4504, BS4504, BS1560, BS10

Forged Flanges
ASTM / ASME / ANSI / ASA Standards
a. Standards of Flanges
B16.47 Large Diameter Steel Flanges: NPS 26 through NPS 60 This Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60 and in ratings Classes 75, 150,0300, 400, 600, and 900. Flanges may be cast, forged, or plate (for blind flanges only) materials. Requirements and recommendations regarding bolting and gaskets are also included.

The American Society of Mechanical Engineers issues standards for mechanical and piping design. ASME standard B16.47 covers large diameter pipes up to a 60-inch bore. ASME standard B16.7 series A flanges are equivalent to MSS SP44 flanges. ASME standard B16.7 series B matches API 605 flanges.

B16.5 Pipe Flanges and Flange Fittings standard covers pressure-temperature ratings, materials, dimensions, tolerances,marking, testing, and methods of designating openings for pipe flanges and flanged fittings.The standard includes flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1/2 through NPS 24, with requirements given in both metric and U.S units. The Standard is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

API Standards
API flanges are designed to handle very high pressures and temperatures. API flanges have a smaller bolt circle than MSS flanges. All API flanges are ring joint flanges. API flange standards start with a number followed by a letter. API standard 17D is the specification for sub-sea well head flanges.

Flange standard series

American Standard Series
ASME/ANSI B16.5 Class 150 BL
ASME/ANSI B16.5 Class 300 BL
ASME/ANSI B16.5 Class 600 BL
ASME/ANSI B16.5 Class 900 BL
ASME/ANSI B16.5 Class 1500 BL
ASME/ANSI B16.5 Class 2500 BL
ASME B16.47 Series A/MSS SP-44 Class 150 BL
ASME B16.47 Series A/MSS SP-44 Class 300 BL
ASME B16.47 Series A/MSS SP-44 Class 600 BL
ASME B16.47 Series A/MSS SP-44 Class 900 BL
ASME B16.47 Series B/API 605 Class 75 BL
ASME B16.47 Series B/API 605 Class 150 BL
ASME B16.47 Series B/API 605 Class 300 BL
ASME B16.47 Series B/API 605 Class 600 BL
ASME B16.47 Series B/API 605 Class 900 BL
ASME B16.48 Class 150
ASME B16.48 Class 300
ASME B16.48 Class 600
ASME B16.48 Class 900
ASME B16.48 Class 1500
ASME B16.48 Class 2500
ASME/ANSI B16.5 Class 150 LJ
ASME/ANSI B16.5 Class 300 LJ
ASME/ANSI B16.5 Class 600 LJ
ASME/ANSI B16.5 Class 900 LJ
ASME/ANSI B16.5 Class 1500 LJ
ASME/ANSI B16.5 Class 2500 LJ
ASME B16.36 Class 300, Welding Neck, Slip-On and Threaded
ASME B16.36 Orifice Flanges Class 400, Welding Neck2
ASME B16.36 Orifice Flanges Class 600, Welding Neck2,3
ASME B16.36 Orifice Flanges Class 900, Welding Neck2
ASME B16.36 Orifice Flanges Class 1500, Welding Neck2
ASME B16.36 Orifice Flanges Class 2500, Welding Neck2
Ring Joint Facings ASME/ANSI B16.5 & B16.47-1
Ring Joint Facings ASME/ANSI B16.5 & B16.47-2
Ring Joint Facings ASME/ANSI B16.5 & B16.47-3
Ring Joint Facings ASME/ANSI B16.5 & B16.47-4
ASME/ANSI B16.5 Class 150 SW
ASME/ANSI B16.5 Class 300 SW
ASME/ANSI B16.5 Class 600 SW
ASME/ANSI B16.5 Class 1500 SW
ASME/ANSI B16.5 Class 150 SO
ASME/ANSI B16.5 Class 300 SO
ASME/ANSI B16.5 Class 600 SO
ASME/ANSI B16.5 Class 900 SO
ASME/ANSI B16.5 Class 150 WN
ASME/ANSI B16.5 Class 300 WN
ASME/ANSI B16.5 Class 600 WN
ASME/ANSI B16.5 Class 900 WN
ASME/ANSI B16.5 Class 1500 WN
ASME/ANSI B16.5 Class 2500 WN
ASME B16.47 Series A/MSS SP-44 Class 150 WN
ASME B16.47 Series A/MSS SP-44 Class 300 WN
ASME B16.47 Series A/MSS SP-44 Class 600 WN
ASME B16.47 Series A/MSS SP-44 Class 900 WN
ASME B16.47 Series B/API 605 Class 75 WN
ASME B16.47 Series B/API 605 Class 150 WN
ASME B16.47 Series B/API 605 Class 300 WN
ASME B16.47 Series B/API 605 Class 600 WN
ASME B16.47 Series B/API 605 Class 900 WN

ANSI/AWWA C207-07, AWWA Standard for Steel Pipe Flanges for Waterworks Service-Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
AWWA C207 Class B-Ring and Blind Flanges
AWWA C207 Class B-Hub and Blind Flanges
AWWA C207 Class D-Ring and Blind Flanges
AWWA C207 Class D-Hub and Blind Flanges
AWWA C207 Class E-Ring and Blind Flanges
AWWA C207 Class E-Hub and Blind Flanges
AWWA C207 Class F-Ring and Blind Flanges

BS Standards
BS 10:1962    Specification for Flanges and Bolting for Pipes, Valves and Fittings (covering plain, boss, integrally cast or forged, and welding neck type flanges).
BS 1560 : WELDING NECK FLANGE, SOCKET WELDING FLANGE, SLIP-ON BOSS FLANGE, BLIND FLANGE, SCREWED BOSS FLANGE, LAPPED FLANGE. Pressure Class : 150 , 300 , 400 , 600 , 900, 1500 , 2500
BS 4504(ISO 7005-1: 1992 (E)    Specification for Steel Flanges (pressure ranges PN 2.5 to PN 40 and nominal sizes up to DN 4000)

BS 3293 Class 150 SO
BS 3293 Class 300 SO
BS 3293 Class 600 SO
BS 3293 Class 150 WN
BS 3293 Class 300 WN
BS 3293 Class 600 WN

DIN Flanges

DIN Flange Standards:
DIN 2527 Blind flange - PN6-PN 100
DIN 2576 Flat flange for welding - PN 10
DIN 2642 Lapped flange - PN 10
DIN 2655 Lapped flange - PN 25
DIN 2656 Lapped flange - PN 40
DIN 2641 Lapped flange - PN 6
DIN 2673 Lose flange and ring with neck for welding - PN 10
DIN 2561 Oval flange, with neck threaded - PN 10 and PN 16
DIN 2558 Oval flange, with neck threaded - PN 6
DIN 2566 Threaded flange with neck - PN 10 and PN 16
DIN 2630 Welding neck flange - PN 1 and PN 2.5
DIN 2632 Welding neck flange - PN 10
DIN 2637 Welding neck flange - PN 100
DIN 2633 Welding neck flange - PN 16
DIN 2638 Welding neck flange - PN 160
DIN 2634 Welding neck flange - PN 25
DIN 2628 Welding neck flange - PN 250
DIN 2629 Welding neck flange - PN 320
DIN 2635 Welding neck flange - PN 40
DIN 2627 Welding neck flange - PN 400
DIN 2573 Welding neck flange - PN 6
DIN 2636 Welding neck flange - PN 64
DIN 2631 Welding neck flange - PN6

Material:
Carbon Steel: DIN 17175: ST35.8,ST45.8, ST37.2,ST37, DIN 17173: ST35N
Stainless Steel: W.Nr 1.4301, W.Nr 1.4306, W.Nr 1.4401, W.Nr 1.4404, W.Nr 1.4541
Duplex Stainless Steel: W.Nr 1.4362, W.Nr1.4417, W.Nr1.4462, W.Nr1.4460, W.Nr1.4501, W.Nr1.4410, W.Nr 1.4507

API Standards
API 605 Large-diameter Carbon Steel Flanges (nominal Pipe Sizes 26 Through 60; Classes 75, 150, 300, 400, 600 And 900)

MSS Standards
MSS SP-9   standard for spot facing flanges.
MSS SP-44  standard for steel pipeline flanges.
MSS SP-60  standard for connecting flange joint.

AS Standards
AS4087-2004 Metallic flanges for waterworks purposes
AS2129 Flanges for Pipes, Valves and Fittings

AWWA Standards
AWWA C207   Steel Pipe Flanges for Waterworks Service--Sizes 4 In. Through 144 In. (100 mm Through 3600 mm).

EN1092-1 Standards
EN1092-1   Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories.

GOST Standards
12820-80   Russian pipe flanges standard for flat type.   
12821-80   Russian pipe flanges standard for weld neck type.  

ISO 15590-3:2004 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 3: Flanges

JIS Standards
B2220   Steel Welding Pipe Flanges.

KS Standards
B1503   Steel Welding Pipe Flanges.

SABS/SANS Standards
SANS-1123   South African pipe flanges standard.

TOTAL Standards
TOTAL GS EP PLR 222 Carbon steel flanges and branch outlet fittings and forged
components for pipelines (sweet service)
TOTAL GS EP PLR 223 Carbon steel tees for pipelines (sweet service)

UNI Standards
UNI 2276-67 Flat Flange.
UNI 2277-67 Flat Flange.
UNI 2278-67 Flat Flange.
UNI 6083-67 Flat Flange.
UNI 6084-67 Flat Flange.
UNI 6088-67 Lap Joint Flange, Loose Flange.
UNI 6089-67 Lap Joint Flange, Loose Flange.
UNI 6090-67 Lap Joint Flange, Loose Flange.
UNI 2299-67 Lap Joint Flange, Loose Flange.
UNI 2300-67 Lap Joint Flange, Loose Flange.
UNI2280-67 Weld Neck Flange.
UNI2281-67 Weld Neck Flange.
UNI2282-67 Weld Neck Flange.
UNI2283-67 Weld Neck Flange.
UNI2284-67 Weld Neck Flange.
UNI2285-67 Weld Neck Flange.
UNI2286-67 Weld Neck Flange.
UNI2253-67 Threaded Neck Flange.
UNI2254-67 Threaded Neck Flange.
UNI6091-67 Blind Flange.
UNI6092-67 Blind Flange.
UNI6093-67 Blind Flange.
UNI6094-67 Blind Flange.
UNI6095-67 Blind Flange.
UNI6096-67 Blind Flange.
UNI6097-67 Blind Flange.

b. Raw material:
All pipe flanges in carbon, stainless, alloys and chrome steel materials. ( See Technology pages )

c. Flange types:
Weld Neck (WN), Slip on (SO), Blind (BL), Threaded (THR), Socket Weld (SW), Lap Joint (LJ), Orifice Flanges, RTJ and custom flanges.
d. Size:
Sizes Range from 1/2" to 80", DN15-DN2000. 
e.Pressure classes:
ANSI, ASME, ASTM, BS10 - Lbs/Psi 150, 250, 300, 350, 400, 600, 900, 1500, 2500
JIS B2220, KS1503 - 5K, 10K, 16K, 20K, 30K
DIN, UNI, EN1092-1, BS 4504, GOST12820/12821-80 etc - PN6, PN10, PN16, PN25, PN40, PN63, PN100
SANS/SABS 1123 - Class 600/3, 1000/3, 1600/3, 2500/3, 4000/3

Flanges:
 - Com Pescoço (Welding Neck), Encaixe (Socket Welding), Sobreposto (Slip On), Roscado (Threaded), Cego (Blind), Solto (Lap Joint), Pescoço com tomada de pressão (Welding Neck Orifice).
 
- Diâmetro nominal de 1/2 polegada até 114 polegadas, em todas as espessuras conforme ANSI B36.10 e ANSI B36.19 ou conforme desenho.
 
- Norma dimensional ASME B16.5 / B16.36 / B16.47 Serie “A” e Serie “B”/ MSS SP-44 / API 605 / API 6ª / API 17D / AWWA C207, ou Forjado Especial conforme desenho.
 
- Material ASTM A-105 / ASTM A-182 Gr. F5, F5a, F9, F11, F12, F304, F304H, F304L, F316, F316H, F316L, F317, F317H, F317L, F321, F321H, F321H, F347, F347H, F347L/ ASTM A-350 Gr.LF1, LF2, LF3 / ASTM A-694 Gr. F42, F46, F48, F50, F52, F56, F60, F70, F75.
 
Figura Oito:
 - Figura oito (Spectacle Blind), Anel espaçador e Raquete (Spacer Ring and Paddle).
 
- Diâmetro nominal de 1/2 polegada até 42 polegadas ou conforme desenho.
 
- Norma dimensional N120 Rev.C / ASME B16.48, ou Forjado especial conforme desenho.
 
- Material ASTM A-36 / ASTM A-283 Gr.C / ASTM A-285 Gr.C / ASTM A-515 Gr.70 / ASTM A-516 Gr.55, Gr.60, Gr.70 / ASTM A-387 Gr.TP5a, TP9, TP11, TP12 / ASTM A-694 Gr.F42, F46, F48, F50, F52, F56, F60, F70 / ASTM A-240 TP304, TP304H, TP304L, TP316, TP316H, TP316L, TP317, TP317H, TP317L, TP321, TP321H, TP321L, TP347, TP347H, TP347L.

Chemical Composition (%, max)

Material Symbol C Mn P S Si Ni Cr Mo Cu N V Co
ASTM A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.40 0.30 0.12 0.40 _ 0.08 _
ASTM A350 LF2 0.30 0.60-1.35 0.035 0.040 0.15-0.30 0.40 0.30 0.12 0.40 _ 0.08 0.02
ASTM A182 F304 0.08 2.00 0.045 0.030 1.00 8.0-11.0 18.0-20.0 _ _ _ _ _
ASTM A182 F304L 0.03 2.00 0.045 0.030 1.00 8.0-13.0 18.0-20.0 _ _ _ _ _
ASTM A182 F316 0.08 2.00 0.045 0.030 1.00 10.0-14.0 16.0-18.0 2.00-3.00 _ _ _ _
ASTM A182 F316L 0.03 2.00 0.045 0.030 1.00 10.0-15.0 16.0-18.0 2.00-3.00 _ _ _ _
ASTM A182 F321 0.08 2.00 0.045 0.030 1.00 9.0-12.0 17.0-19.0 _ _ _ _ _
EN 10025 S235JR 0.20 1.40 0.045 0.045 _ _ _ _ _ 0.009 _ _
20Mn 0.17-0.23 0.70-1.00 0.035 0.035 0.17-0.37 0.30 0.25   0.25      
20 0.17-0.23 0.60-1.00 0.030 0.020 0.17-0.37 0.25 0.25   0.25      
16Mn 0.13-0.19 1.20-1.60 0.030 0.020 0.20-0.60 0.30 0.30   0.25      

Mechanical Properties

Material Symbol Tensile Strength, min, MPa Yield point, min, Mpa Elongation, min, % Reduction of area, min, % Hardness, max, HB Min. Impact
Average, J
Test Temperature, °C
ASTM A105 485 250 22 30 187    
ASTM A350 LF2 485-655 250 22 30   20 -46
ASTM A182 F304 515 205 30 50      
ASTM A182 F304L 485 170 30 50      
ASTM A182 F316 515 205 30 50      
ASTM A182 F316L 485 170 30 50      
ASTM A182 F321 515 205 30 50      
20Mn 450 275 24 50 197    
20
Norsok L005 Compact Flange
Bigger dimensions Limited to : 48" (CL 1500)- 24" (CL 2500)
Higher Pressure Classes Limited to CL 2500
Swivel flanges Not available
Adapted face angle Fixed angle
Seal ring types adapted to specific application 1 Sealring type : IX
Quality Open standard, dominated by flange factories.
Availibility Bolting Material B7 / L7
Engineering and on-site support Close to non-existent
More practical temperature limits -100°C to +250°C
 
A Summary of the DNs applicable to each rating class is given in Table
DN NPS CL600 CL900 CL1500  CL2500
15 1/2" Equal to CL2500 Equal to CL2500 Equal to CL2500 *
20 3/4" *
25 1" *
40 1 1/2" *
50 2" Equal to CL1500 Equal to CL1500 * *
65 2 1/2" * *
80 3" Equal to CL900 * * *
100 4" * * *
125 5" * * *
150 6" * * * *
200 8" * * * *
250 10" * * * *
300 12" * * * *
350 14" * * * *
400 16" * * * *
450 18" * * * *
500 20" * * * *
550 22" * * * *
600 24" * * * *
650 26" * * * *
700 28" * * * *
750 30" * * * *
800 32" * * * *
850 34" * * * *
900 36" * * * *
950 38" * * * *
1000 40" * * * *
1050 42" * * * *
1100 44" * * * *
1150 46" * * * *
1200 48" * * * *
           
Note: "Equal to CL xxxx" means that the dimensions are equal for the referred pressure class. The flangs shall then be marked with the higher pressure class.
 
 

 


 

 

Specifications︰

TYPES


•Weld Neck

•Slip‐On

•Socket Weld

•Blind

•Threaded

•Lap Joint

•Long Weld Neck



Bridas con Cuello para Soldar (Welding Neck)



Bridas Deslizantes (Slip-on)



Bridas Ciegas (Blind)



Bridas con Asiento para Soldar (Socket Welding)



Bridas Roscadas (Threaded)



Bridas para Junta con Solapa (Lap-Joint)



Bridas de Orificio



Bridas forjadas en Acero al Carbono y Acero Inoxidable

MATERIALS


Carbon Steel, Stainless Steel, Duplex & Super Duplex, Alloy steel

STANDARDS GRADES


A105

A350 LF2/LF3

A182 F1,F5,F9,F11,F22

A182 F304/304L, F316/316L

A694 F42,F46,F52,F56,F60, F65,F70

A182 F51,F53,F60

Standard Met︰Types of Flanges
Flange types
As already described before, the most used flange types ASME B16.5 are: Welding Neck, Slip On, Socket Weld, Lap Joint, Threaded and Blind flange. Below you will find a short description and definition of each type

Welding Neck flange
Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.
The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness effected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.
These flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easily radiographed for flaw detection.
This flange type will be welded to a pipe or fitting with a single full penetration, V weld (Buttweld).
Details of Welding Neck flange

1. Weld Neck flange 2. Butt Weld
3. Pipe or Fitting
Slip On flange
The calculated strength from a Slip On flange under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter.
The connection with the pipe is done with 2 fillet welds, as well at the outside as also at the inside of the flange.
The X measure on the image, are approximately:
Wall thickness of pipe + 3 mm.
This space is necessary, to do not damage the flange face, during the welding process.
A disadvantage of the flange is, that principle always firstly a pipe must be welded and then just a fitting. A combination of flange and elbow or flange and tee is not possible, because named fittings have not a straight end, that complete slid in the Slip On flange.
Details of Slip On flange

1. Slip On flange 2. Filled weld outside
3. Filled weld inside 4. Pipe
Socket Weld flange
Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.
The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.
ASME B31.1 1998 127.3 Preparation for Welding (E) Socket Weld Assembly says:
In assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16" (1.6 mm) away from contact between the end of the pipe and the shoulder of the socket.
The purpose for the bottoming clearance in a Socket Weld is usually to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the X measure for the expansion gap.
The disadvantage of this flange is right the gap, that must be made. By corrosive products, and mainly in stainless steel pipe systems, the crack between pipe and flange can give corrosion problems. In some processes this flange is also not allowed. I am not an expert in this matter, but on the internet, you will find a lot of information about forms of corrosion.
Also for this flange counts, that principle always firstly a pipe must be welded and then just a fitting.
Details of Socket Weld Flange

1. Socket Weld flange 2. Filled weld 3. Pipe
X = Expansion gap
Lap Joint flange
Lap Joint Flanges have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a "Lap Joint Stub End".
These flanges are nearly identical to a Slip On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End.
Their pressure-holding ability is little, if any, better than that of Slip On flanges and the fatigue life for the assembly is only one tenth that of Welding Neck flanges.
They may be used at all pressures and are available in a full size range. These flanges slip over the pipe, and are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe lap (Stub End).
Lap Joint flanges have certain special advantages:
Freedom to swivel around the pipe facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid in the pipe often permits the use of inexpensive carbon steel flanges with corrosion resistant pipe.
In systems which erode or corrode quickly, the flanges may be salvaged for re-use.
Details of Lap Joint Flange

1. Lap Joint flange 2. Stub End
3. Butt weld 4. Pipe or Fitting
Stub End
A Stub End always will be used with a Lap Joint flange, as a backing flange.
This flange connections are applied, in low-pressure and non critical applications, and is a cheap method of flanging.
In a stainless steel pipe system, for example, a carbon steel flange can be applied, because they are not come in contact with the product in the pipe.
Stub Ends are available in almost all pipe diameters. Dimensions and dimensional tolerances are defined in the ASME B.16.9 standard. Light-weight corrosion resistant Stub Ends (fittings) are defined in MSS SP43.
Lap Joint Flange with a Stub End

Threaded flange
Threaded Flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection.
Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes.
A threaded flange or fitting is not suitable for a pipe system with thin wall thickness, because cutting thread on a pipe is not possible. Thus, thicker wall thickness must be chosen...what is thicker ?
ASME B31.3 Piping Guide says:
Where steel pipe is threaded and used for steam service above 250 psi or for water service above 100 psi with water temperatures above 220° F, the pipe shall be seamless and have a thickness at least equal to schedule 80 of ASME B36.10.
Details of Threaded flange

1. Threaded flange 2. Thread 3. Pipe or Fitting
Blind flange
Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.
From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.
However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.
Details of Blind flange

1. Blind flange 2. Stud Bolt 3. Gasket 4. Other flange



Product Image


DIN 2632 PN 10 Weld Neck Flanges,DIN 2632 Flange
DIN 2632 PN 10 Weld Neck Flanges,DIN 2632 Flange

Threaded Flange
Threaded Flange

API 6A 6BX Flange,API 10000PSI(69.0MPA) TYPE 6BX Welding Neck RTJ Flange,LWN(LONG WELD NECK) FLANGE
API 6A 6BX Flange,API 10000PSI(69.0MPA) TYPE 6BX Welding Neck RTJ Flange,LWN(LONG WELD NECK) FLANGE


STEEL BACKING FLANGES, AS 2129 TABLE D backing Flange,EN1092-1 steel plate backing flanges
STEEL BACKING FLANGES, AS 2129 TABLE D backing Flange,EN1092-1 steel plate backing flanges



ASME B16.47 RING JOINT FLANGES
ASME B16.47 RING JOINT FLANGES



DIN 2527 FLANGE PACKAGING
DIN 2527 FLANGE PACKAGING


Flange-production
Flange-production

Flange-test-equipment
Flange-test-equipment



Self Reinforced Weldneck FLANGE-LATHING
Self Reinforced Weldneck FLANGE-LATHING


1/4"~24" FLANGE SIZE RANGE
1/4"~24" FLANGE SIZE RANGE

Related Products
ASME/ANSI B16.9,ASME B16.48,MSS SP-75,ASTM A860,ISO 15590-2 BUTTWELD FITTINGS
ASME/ANSI B16.9,ASME B16.48,MSS SP-75,ASTM A860,ISO 15590-2 BUTTWELD FITTINGS
US $ 1.8
ASME B16.11/ASTM A105/ASTM A182  FORGING FITTINGS
ASME B16.11/ASTM A105/ASTM A182 FORGING FITTINGS
ASTM A420,MSS SP-43/75,EN 10253-1  ASTM A105,A182,ASTM A234 WELDED FITTINGS
ASTM A420,MSS SP-43/75,EN 10253-1 ASTM A105,A182,ASTM A234 WELDED FITTINGS
ASME/ANSI B16.9,ASME B16.48,ASTM A234,MSS SP-75,ASTM A860 BUTTWELD ELBOW
ASME/ANSI B16.9,ASME B16.48,ASTM A234,MSS SP-75,ASTM A860 BUTTWELD ELBOW
US $ 1.8

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap