Scaffolding Pipe
High tensile scaffolding pipes are designed for pipes & coupler scaffolding.The pipes have hot dippe dgalvanized surfaces finish so as to provide excellent appearance with sufficient durability in such applications where salty air or long term weather exposures are inevitable.
Standard:BS1139:1775 , EN39:2001 ,JIS G3444:2004
Steel Grade: BS1139 :1775:Q235B , Q345B EN39:2001: S235JR , S355JR, JIS G3444:2004: STK400 / STK500
Scaffold tube is readily available, pre-cut in lengths of 21' - 16' - 13' - 10' - 8' - 6' & 5'
Other lengths can be cut to required size upon request.
Product testing and in compliance to BS 1139 / EN39
| Outer diameter |
Wall thickness |
Length |
| mm |
mm |
meter |
| 48.3 |
4 |
6.0/6.4M |
| 48.3 |
3.6 |
6.0/6.4M |
| 48.3 |
3.2 |
6.0/6.4M |
| 48.3 |
3 |
6.0/6.4M |
| 48.6 |
2.5 |
6.0/6.4M |
| 48.6 |
2.3 |
6.0/6.4M |
| 42.7 |
2.4 |
6.0/6.4M |
| 34 |
2.2 |
6.0/6.4M |
| 27.2 |
1.9 |
6.0/6.4M |
| 21.7 |
1.9 |
6.0/6.4M |
| |
| Specification of weld steel tubes for metal scaffolding |
| Dimensions and weight |
tolerance |
| Outside diameter.approx.1.906in. |
min 1.889'',max 1.919'' |
| Thickness 0.125''/0.160''(8 SWG) |
plus 20% or minus 10% |
| Nominal weight.3.56kgs/m,4.37kgs/m |
|
| Mean weight on quantities of 500ft and over |
plus or minus 4% of narmal weight |
| Maximum reduction permissible on weight of any individual tube |
7-1/2'' % |
| Length if specified exact |
plus or minus 1/4'' |
| Straightness |
0.002*L |
High Yield Tube
High Yield S355 Galvanised scaffold tube is 20% lighter than the standard
4mm thick scaffold tube with the same structural capabilities.
Outside Diameter 48.3mm
Wall Thickness 3.2mm
Product testing and in compliance to EN10219-1:2006
Surface: hot dipped galavanized , electro galvanized ,painted, engraved .
Packing: Hexagonal bundles of max. 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Third party inspection:SGS, BV, Lloyds etc.
We are also exporting all of scaffolding system and accessories,ring-lock,cup-lock,kwikstage,coupler,clamp.'Ecellent quality,the credibility of the supremacy' is our motto.
