Company Profile
Products
Welded Pipe
Seamless Pipe
Stainless Pipe
Ductile Iron Pipe
Fin Tube
OCTG
Copper Tube
Plastic Pipe
Pipe Fittings
Fastener
Flat & Rolled Metallic Materials
Pressure Vessel
Reference List
Association Membership
Inspection Report
Quality Policy
HSE
EPCM
News
Pipe Specs
CS Pipe Specs
Stainless Steel Specs
API Specs
EN & DIN Specification
Australian Standard
GOST Specification
Corrosion Protection
Steel Plate Specs
Fittings Specs
Fasteners Specs
Contact Us

Products 

 

API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing

  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
  • API 5CT J55,K55,N80,L80,Q95,P110,Q125-Gas & Petroleum Well Tubing,Oil Tubing
Model No.︰-
Brand Name︰-
Country of Origin︰-
Unit Price︰US $ 900 / MT
Minimum Order︰20 MT
Share on:

 Total 16 Related Items 
Prev12345Next

Product Description
Oil Tubing
Keywords:API 5CT Steel Pipe, J55,K55,L80,N80Q,C90,T95,P110 Oil/Petroleum Casing Pipe, OCTG
1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2"
2) Grade: J55, N80, L80, C90, T95, P110
3) Wall thickness: 3.18 - 10.54mm
4) Length: R1,R2,R3
5) Thread: 8RD and 10RD
6) All our Tubing accord with API SPEC 5CT standard, and we get the right to use the API 5CT LOGO.
Size Desination Weight Desination Outside Diameter Wall Thickness Type of End Finish
Grade
T&C Non-Upset T&C External Upset in mm in mm J55 K55 L80 N80 C90 T95 P110
1.900 2.40 - 1.900 48.26 0.125 3.18 PI - - - - -
2.75 2.90 0.145 3.68 PNUI PNUI PNUI PNUI PNUI -
3.65 3.73 0.200 5.08 PU PU PU PU PU PU
4.42 - 0.250 6.35 - P - P P -
5.15 - 0.300 7.62 - P - P P -
2 3/8 4.00 - 2.375 60.3 0.167 4.24 PN PN PN PN PN -
4.00 4.70 0.190 4.83 PNU PNU PNU PNU PNU PNU
5.80 5.95 0.254 6.45 - PNU PNU PNU PNU PNU
6.60 - 0.259 7.49 P P P P P -
7.35 7.45 0.336 8.53 PU PU PU PU PU -
2 7/8 6.40 6.50 2.875 73.02 0.217 5.51 PNU PNU PNU PNU PNU PNU
7.80 7.90 0.276 7.01 - PNU PNU PNU PNU PNU
8.60 8.70 0.308 7.82 - PNU PNU PNU PNU PNU
9.35 9.45 0.340 8.64 - PU - PU PU -
10.50 - 0.392 9.96 - P - P P -
11.50 - 0.440 11.18 - P - P P -
3 1/2 7.70 - 3.500 88.9 0.216 5.49 PN PN PN PN PN -
9.20 9.30 0.254 6.45 PUN PUN PUN PNU PNU PUN
10.20 - 0.289 7.34 PN PN PN PN PN -
12.70 12.95 0.375 9.53 - PUN PUN PNU PNU PUN
14.30 - 0.430 10.92 - P - P P -
15.50 - 0.476 12.00 - P - P P -
17.00 - 0.530 13.46 - P - P P -
4 9.50 - 4.00 101.6 0.226 5.74 PN PN PN PN PN PN

10.70

11.00 0.262 6.65 PU PU PU PU PU PU
4 1/2 12.60 12.75 4.500 114.3 0.271 6.88 PNU PNU PNU PNU PNU -
15.20 - 0.337 8.56 - P - P P -
17.00 - 0.380 9.65 - P - P P -
18.90 - 0.430 10.92 - P - P P -
21.50 - 0.500 12.70 - P - P P -
23.70 - 0.560 14.22 - P - P P -
26.10 - 0.630 16.00 - P - P P -

API 5CT Casing & Tubing PSL 1,PSL 2, PSL 3
API H40 
Minimum Yield Strength: 40,000 psi
Maximum Yield Strength: 80,000 psi
Minimum Tensile Strength: 60,000 psi
Notes: General purpose pipe manufactured to API specification 5CT. 
API J55 
Minimum Yield Strength: 55,000 psi
Maximum Yield Strength: 80,000 psi
Minimum Tensile Strength: 75,000 psi
Hardness Requirement: None
Notes: General purpose pipe manufactured to API specification 5CT. Similar to K55 except the minimum tensile strength is lower. Usually, this grade is used in tubing applications. 
API K55 
Minimum Yield Strength: 55,000 psi
Maximum Yield Strength: 80,000 psi
Minimum Tensile Strength: 95,000 psi
Hardness Requirement: None
Notes: General purpose pipe manufactured to API specification 5CT. Usually, this grade is used in casing applications 
API L80 
Minimum Yield Strength: 80,000 psi
Maximum Yield Strength: 95,000 psi
Minimum Tensile Strength: 95,000 psi
Hardness Requirement: 23 HRC maximum
Notes: Manufactured to API specification 5CT. This is a controlled yield strength material with a hardness testing requirement. L80 is usually used in wells with sour (H2S) environments. 
API N80 (or N80 Q&T) 
Minimum Yield Strength: 80,000 psi
Maximum Yield Strength: 110,000 psi
Minimum Tensile Strength: 100,000 psi
Hardness Requirement: None
Notes: General purpose pipe manufactured to API specification 5CT. 
API Normalized N80 
Minimum Yield Strength: 80,000 psi
Maximum Yield Strength: 110,000 psi
Minimum Tensile Strength: 100,000 psi
Hardness Requirement: None
Notes: A lower-cost alternative to standard Quench and Tempered API N80 (walls less than 0.500 inch). Inspection, testing and dimensions are in accordance with API 5CT for grade N80. Charpy v-notch impact test absorbed energy results meet API SR16 and are lower than Quench and Tempered N80. 
API C90 
Minimum Yield Strength: 90,000 psi
Maximum Yield Strength: 105,000 psi
Minimum Tensile Strength: 100,000 psi
Hardness Requirement: 25.4 HRC maximum
Hardness testing is conducted as required for API T95, with the exception of frequency (Casing and Non-Upset Tubing - First, last and every tenth joint in between; Upset Tubing - First, last and every 25th joint in between). To reduce order lead time, sulphide stress corrosion cracking (SSCC) testing is not required for every order. If required by the customer, SSCC testing can be performed to U. S. Steel Standard Mill Practice P-1004 (NACE Standard TM-0177-Method A) with a guaranteed minimum threshold stress of 85 percent specified minimum yield strength. 
API T95 
Minimum Yield Strength: 95,000 psi
Maximum Yield Strength: 110,000 psi
Minimum Tensile Strength: 105,000 psi
Hardness Requirement: 25.4 HRC maximum
Notes: API controlled yield strength grade, the same as API C95. Generally for use in sour condensate wells. Extensive hardness testing is required along with SSCC testing per NACE Standard TM-0177-Method A. The minimum threshold stress required is 80 percent of specified minimum yield strength. 
API P110 
Minimum Yield Strength: 110,000 psi
Maximum Yield Strength: 140,000 psi
Minimum Tensile Strength: 125,000 psi
Hardness Requirement: None
Notes: API grade for general use in deep wells. This grade is not generally considered suitable for sour condensate wells. 
API Q125 
Minimum Yield Strength: 125,000 psi
Maximum Yield Strength: 150,000 psi
Minimum Tensile Strength: 135,000 psi
Hardness Requirement: No limit specified - Hardness variation requirement
Notes: API grade for deep well service, not generally for use in sour condensate wells. Quadrant hardness testing is required without any specified limits other than the variation between readings. Impact testing is required for each heat and/or lot. NDT inspection is required with two methods of inspection (typically EMI and UT are performed on this product). 
V150 
Minimum Yield Strength: 150,000 psi
Maximum Yield Strength: 180,000 psi
Minimum Tensile Strength: 160,000 psi
Hardness Requirement: None
 Steel grade for use in deep well applications. Dimensions and inspection are in accordance with API 5CT Group 3 requirements. 


•API 5CT OCTG (Casing & Tubing) Latest Edition
•OCTG from 1.660" to 30'' + respective couplings, crossovers and pup joints
•API Grades from H40 to Q125 and 13% CR
•ALL API Standard Weights
•API and Premium Joint Connections
•Special SS and HC grades
•CRA Grades
Section: Seamless & Welded
Standards:
API Specification 5CT latest edition at time of manufacture (PSL-1, PSL-2, PSL, 3)
ISO 11960:2004, Petroleum and natural gas industries-Steel pipes for use as casing or tubing for wells
DEP 39.01.20.10-Gen L80 13%Cr casing and tubing (amendments/supplements to ISO/DIS 11960.2)
DEP 39.01.20.30-Gen Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - technical delivery conditions (endorsement of ISO 13680)
DEP 39.01.20.31-Gen Care and use of casing and tubing (endorsement of ISO 10405)


Sizes:
Outside Diameter: 1.660" - 30"

Grades:
H40, J55, K55, N80-1,N80-Q, L80-1, C90-1,C90-2, C95, T95-1,T95-2,T95-3, P110, Q125-1, Q125-2,Q125-3,Q125-4.

13Cr Series:
L80-13Cr,
C95-SP13Cr1
C95-SP13Cr2
P110-SP13Cr1
P110-SP13Cr2

Connections:

•STC (short round thread casing)
•LTC (long round thread casing)
•BTC (buttress thread casing)
•XL (extreme-line casing)
•NUE (non-upset tubing)
•EUE (external upset tubing)
•IJ (integral joint tubing)
•Premium Connections
And almost any premium & gas tight connection

Length:
Range 1, Range 2 & Range 3:

Applicable Tests:
See our Standard Inspection Scope

Protection:

External bare and uncoated or externally coated with black/ transparent anti rust Mill varnish
Plastic or Metal Pin and Box Protectors.
Internal plastic coating or sleeves.

Mill Test Certificates:
Issued in accordance with API Specification 5CT Eighth Edition
Additional Third Party Inspection can also be performed on request.

A wide range of Casings and Tubing are available from Stock:


DIMENSIONAL & WEIGHT TOLERANCES
Outside Diameter (OD) up to 4" +.031", -.031"
4 1/2"+ +1%, -0.5%, not to exceed .125"
Wall Thickness +0, -12.5%
Weight single joint +6.5%, -3.5%
carload (>40,000#) +0, -1.75%
Drift diameter up to 2 7/8" OD (42" mandrel) d-3/32"
3 1/2" to 8 5/8" (6" mandrel) d-1/8"
9 5/8" to 13 3/8" (12" mandrel) d-5/32"
Straightness 4 1/2"+ 0.2% end-to-end (PE), .125" in 5' at each end
Length Range 1 casing 16-25'
Range 2 casing 25-34'
Range 3 casing 34-48'
Range 1 tubing 20-24'
Range 2 tubing 28-32'
pup joints (2,4,6,8,10 &12') +3", -3"
INSPECTION CLASSIFICATIONS
New Tubing/Casing
(and Plain End Drill Pipe)
*White Band: suitable for all inspections performed (incl. min. 87.5% body wall).
*Yellow Band: Repairable reject. 87.5% body wall remaining after repair. Locate bands on either side and circle around defect.
*Blue Band: Imperfections of undetermined depth. Identified as above.
*Red Band: Defective length. Identified as above. Body wall defects must be cut out of tube.
Damaged pin or box ends marked with red bands next to pin or on coupling
Drift restrictions indicated by red bands on either side of restriction - just like other defects.
Tube classification bands appear in same location (box end) as on used material

ISO/TR 10400:2007 Petroleum and natural gas industries -- Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
GOST 632:1980, Casing pipes and couplings.

Product Image










Related Products
API 5CT J55,K55,N80-1,N80-Q,L80-1,L80-9Cr,L80-13Cr,C90,T95,P110,Q125 CASING
API 5CT J55,K55,N80-1,N80-Q,L80-1,L80-9Cr,L80-13Cr,C90,T95,P110,Q125 CASING
US $ 850
API 5CT L80-9Cr/L80- 13Cr Corrosion Resistant Alloy Casing and Tubing
API 5CT L80-9Cr/L80- 13Cr Corrosion Resistant Alloy Casing and Tubing
High Collapse Casing & Tube-API 5CT 80HC,90HC,110HC,125HC,140HC
High Collapse Casing & Tube-API 5CT 80HC,90HC,110HC,125HC,140HC
API 5CT H40,J55,K55,N80 Slotted Liners,Screen Pipe & Perforated Pipe
API 5CT H40,J55,K55,N80 Slotted Liners,Screen Pipe & Perforated Pipe

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Inspection Report  |  Quality Policy  |  HSE  |  EPCM  |  News  |  Pipe Specs  |  CS Pipe Specs  |  Stainless Steel Specs  |  API Specs  |  EN & DIN Specification  |  Australian Standard  |  GOST Specification  |  Corrosion Protection  |  Steel Plate Specs  |  Fittings Specs  |  Fasteners Specs  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap