Company Profile
Products
Welded Pipe
Tubular Piles
Seamless Pipe
OCTG
Stainless Pipe
Ductile Iron Pipe
Copper Tube
Fin Tube
Plastic Pipe
Steel Plate/Coil
Bar,Rod & Wire
Pipe Fittings
Fastener
Reference List
Association Membership
Company News
Quality Policy
HSE
EPCM
Catalogue
Pipe Specification
Coating Specification
Pipe Fitting Specs
API Specification
AS(Australian Standards)
DIN(Deutsche Institut für Normun)
EN(Europaischen Normen)
GOST Specification
NF(Norme Francise)
Contact Us

Products 

 

API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE

API 2B Certified LSAW welded carbon steel pipes used in pile structures
  • API 2B Certified LSAW welded carbon steel pipes used in pile structures
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • API 2B,ASTM A252,AS1163,AS 1579, API 5L X65,EN10219-1,JIS G3457 SAWL PIPE PILE
  • EN 10225 355,API 2H,API 2W,API 2Y GR.50 STEEL PLATE SPECIFICATION
  • EN 10225 460-API 2H-2W-2Y GR.60 STEEL PLATE SPECIFICATION
Model No.︰ASTM A252 GR.3
Brand Name︰API 5L X65 LSAW TUBULAR PILES, AS 1163 PIPE PILES
Country of Origin︰China
Unit Price︰US $ 815 / MT
Minimum Order︰100 MT
Share on:

 Total 18 Related Items 
1415161718

Product Description
O.D W.T. Length(m)
Min.Yield Strength(Mpa)
In. Mm 245(B) 290(X42) 360(X52) 415(X60) 450(X65) 485(X70) 555(X80) 625(X90) 690(X100)
16 406 6.0-37.0 6.0-34.0 6.0-31.0 6.0-29.0 6.0-28.0 6.0-27.0 6.0-26.0 6.0-25.0 6.0-24.0 6.0-50.0
18 457 6.0-40.0 6.0-37.0 6.0-34.0 6.0-31.0 6.0-30.0 6.0-29.0 6.0-28.0 6.0-27.0 6.0-25.0 6.0-50.0
20 508 6.0-43.0 6.0-40.0 6.0-36.0 6.0-34.0 6.0-32.0 6.0-31.0 6.0-29.0 6.0-29.0 6.0-27.0 6.0-50.0
22 559 6.0-45.0 6.0-42.0 6.0-38.0 6.0-36.0 6.0-34.0 6.0-33.0 6.0-31.0 6.0-30.0 6.0-28.0 6.0-50.0
24 610 6.0-48.0 6.0-44.0 6.0-40.0 6.0-38.0 6.0-36.0 6.0-35.0 6.0-33.0 6.0-32.0 6.0-30.0 6.0-50.0
26 660 6.0-50.0 6.0-46.0 6.0-42.0 6.0-40.0 6.0-38.0 6.0-37.0 6.0-34.0 6.0-33.0 6.0-31.0 6.0-50.0
28 711 6.0-52.0 6.0-48.0 6.0-44.0 6.0-41.0 6.0-40.0 6.0-38.0 6.0-36.0 6.0-34.0 6.0-33.0 6.0-50.0
30 762 7.0-55.0 7.0-50.0 7.0-46.0 7.0-43.0 7.0-41.0 7.0-40.0 7.0-37.0 7.0-36.0 7.0-34.0 6.0-50.0
32 813 7.0-57.0 7.0-52.0 7.0-48.0 7.0-44.0 7.0-43.0 7.0-41.0 7.0-39.0 7.0-38.0 7.0-36.0 6.0-50.0
34 864 7.0-59.0 7.0-54.0 7.0-49.0 7.0-46.0 7.0-44.0 7.0-43.0 7.0-40.0 7.0-39.0 7.0-37.0 6.0-50.0
36 914 8.0-61.0 8.0-56.0 8.0-51.0 8.0-48.0 8.0-46.0 8.0-44.0 8.0-42.0 8.0-40.0 8.0-38.0 6.0-50.0
38 965 8.0-63.0 8.0-580 8.0-52.0 8.0-49.0 8.0-47.0 8.0-46.0 8.0-43.0 8.0-41.0 8.0-39.0 6.0-50.0
40 1016 8.0-64.0 8.0-60.0 8.0-54.0 8.0-51.0 8.0-49.0 8.0-47.0 8.0-44.0 8.0-42.0 8.0-40.0 6.0-50.0
42 1067 8.0-66.0 8.0-61.0 8.0-56.0 8.0-52.0 8.0-50.0 8.0-48.0 8.0-45.0 8.0-43.0 8.0-41.0 6.0-50.0
44 1118 9.0-68.0 9.0-63.0 9.0-57.0 9.0-53.0 9.0-51.0 9.0-50.0 9.0-47.0 9.0-45.0 9.0-42.0 6.0--50.0
46 1168 9.0-70.0 9.0-64.0 9.0-58.0 9.0-55.0 9.0-53.0 9.0-51.0 9.0-48.0 9.0-46.0 9.0-44.0 6.0-50.0
48 1219 9.0-71.0 9.0-66.0 9.0-60.0 9.0-56.0 9.0-54.0 9.0-52.0 9.0-49.0 9.0-47.0 9.0-45.0 6.0-50.0
52 1321 9.0-73.0 9.0-67.0 9.0-61.0 9.0-57.0 9.0-55.0 9.0-53.0 9.0-50.0 9.0-48.0 9.0-46.0 6.0-50.0
56 1422 10.0-74.0 10.0-69.0 10.0-62.0 10.0-58.0 10.0-56.0 10.0-54.0 10.0-51.0 10.0-49.0 10.0-47.0 6.0-50.0
60 1524 10.0-75.0 10.0-70.0 10.0-63.0 10.0-59.0 10.0-57.0 10.0-55.0 10.0-52.0 10.0-50.0 10.0-48.0 6.0-50.0
64 1626 10.0-75.0 10.0-70.0 10.0-63.0 10.0-59.0 10.0-57.0 10.0-55.0 10.0-52.0 10.0-50.0 10.0-48.0 6.0-50.0

 

Specifications︰1.Tubular Piles
Tubular piles are tubular pipes used for piling purposes,which are also called steel piles,piping tubes,or tubular piling. Tubular piles are normally large diameter piles because bigger bending moment are required in lots of cases.

Tubular piling are available in numerous European and US steel grades and can be coated on request and are provided with C9 connectors. Steel piles are the main retaining elements of the combined wall, carrying horizontal loads from soil and water pressures and vertical foundation loads. The intermediary Z-type sheet piles transfer horizontal loads to the tubular piles.Piling tubes are manufactured in a range of materials, from standard carbon steel to high tensile steel, and in all thicknesses to suit specified design. Our piling designs are well proven in quay walls and as the backbones of floating structures. Wider applications include foundation works and construction pipes, industrial pipeline networks, communications infrastructure, and machinery.

The tubular combined wall not only service as the retaining wall member, resisting horizontal loads, but also serve as bearing pile which resist vertical loads. The OZ sheet pile can be shorter than the tubular piles and only have the functions of earth retaining and load transfer. Nowadays the interlocks used in the combined piles have many choices on the market, C9 C14 are the most traditional sheet piling accessory.Further fabrications, like piling shoes,lifting ligs, weld beads, beveled ends, corner sections, paintings...etc we can all do in our workshops.SGS or BV Inspection report is normally supplied.

Our Advantages
Ø With our pipe pile mill strategically located near the port and our strong steel pile production ability, No limit on tubular pile dimensions, This is especially important for deep foundations,quay wall, cofferdam,Jetty construction. The biggest tubular pipes we have produced, length up to 100m,diameter up to 3m.Any steel grade,X70 or S460 or A690,as long as you name it, we will produce for your steel piles. Our SSAW pipe machines can produce up to 25mm thickness pipe piling, our LSAW machines can produce up to 100mm thickness piling pipes.
Ø Our steel piling factory will produce the required sheet piles sizes, and corner sections as well. So that we will ship with tubular piles in one shipment, you just need to install them at jobsites.
Ø Further fabrications, like piling shoes, lifting ligs, weld beads, beveled ends, corner sections, paintings...etc we can all do in our workshops.SGS or BV Inspection report is normally supplied.

Paintings:
Our inhouse painting facilities allows for any kind of anti-corrosion protection: Painting, Petrolatum Tapes, Galvanizing.

Application:
Pipe piles are produced from different steel grade for wide applications, for example, foundation pipes, king pile, monopile, bearing pile, pipe pile wall, slope stabilization, pipelines, deep foundation, and struts etc.

Complex Fabrications
Sheet pile interlocks
Factory made L& T clutches
Small pipe connectors
Sheet pile welded on pipes
Pipe driving shoes
For floating fenders
For pipe-pipe combiwall
Interior and exterior weld beading
Lifting holes
Shear rings
End covers
Additional modifications (brackets, tongue plates etc) also available

ACCESSORIES
Chill Rings
A chill ring includes a cylindrical non-consumable base metal ring having an outside diameter sized to fit adequately inside the diameter of the pipe end to be welded.

Conical Points
Conical points are used to push the earth aside and maintain grinding. On rough surfaces, the point distributes the load around the entire pipe, rather than focusing the shock on only a section.

Cutting Shoes
A open-end cutting shoe is an exceptionally tough, heat-treated cast steel shoe with a ledge to ease driving. Use of a cutting shoe protects the pipe end and makes it possible to use a thinner pipe.

Pipe Caps
Pipe caps are available in all standard sizes ranging from 8 5/8" to 72".

Pipe Splicers
Pipe piling splicers are available in all pipe sizes. Pipe splicers help ease alignment of pipe and drive it with no welding required.
2.Specification:
API 2B Specification for the Fabrication of Structural Steel Pipe- ASTM 572 Gr.50, EH36TM, DH36, DH36TMZ
API 5L PSL1/PSL 2 Line Pipe: Gr. B X42, X46, X52, X56, X60, X65, X70, X80/BM.X42M,X46M,X52M,X60M,X65M,X70,X80M
AS 1163 Structural Steel Hollow Sections-C250,C250L0,C350,C350L0,C450,C450L0
AS 1579 Arc-welded steel pipes and fittings for the piling purpose
ASTM A135 Standard Specification for Electric-Resistance-Welded Steel Pipe
ASTM A139 CHIMNEYS AND VENTILATION DUCTS for air and dust filtering systems, and smoke evacuation, PILLARS for ski chair-lifts and bridges
ASTM A252 FOUNDATION PILES for soil consolidation, marine wharfs-Grade 1,2,3ASTM A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
BS 3601 Steel Pipe and Tubes for Pressure Proposes Carbon Steel: Ordinary Duties- Gr. 360,Gr. 430,
BS 7191 All Specification for Weldable Structure Steels for Fixed Offshore Structures
CSA Z245.1 Steel Pipe- Category I, II, III-241,290,359,386,414,448,483,550,620,690,825
DIN 1626 Welded circular tubes of non-alloy steel with special quality requirements-St. 37.0,St44.0, St.52.0
EN 10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain steels-S275,S275J0H,S275J2H,S355,S355J0H,S355J2H,S390,S390J0H,S390J2H,S415,S415J0H,S415J2H,S455,S450J0H,S450J2H
JIS G 3444 Carbon Steel Tubes for General Structural Purpose- STKR 90,400,490,500,540
JIS A5525 Steel Pipe Pile-SPS290,SPS400,SPS490,SP500,SPS500
KS F4602 Steel Pipes Piles
KS F4605 Steel Pipe Sheet Pile

Steel piles for PZM-2 for Oil and Gas (Russia)
3. Coating Specifications
Fusion Bonded Epoxy – Fusion Bond Epoxy is a powder epoxy thermosetting coating applied for anticorrosion protection to steel pipelines. The pipe is first blast cleaned and heated. Then epoxy powder is spray applied by electrostatic guns to melt and form a uniform layer that hardens within a minute from application. Utilizing industry accepted materials supplied by manufacturers such as 3M, DuPont, and Valspar, the facility can apply FBE in a wide range of thickness to cost effectively meet any project specifications.
Fusion Bonded Epoxy with Abrasion Resistance Overcoating (FBE/ARO) – Utilizing two completely separate powder systems, the facility can produce FBE with an ARO at unprecedented processing speeds using industry accepted materials such as 3M 6352, DuPont 7-2610, and Lilly 2040.
Fusion Bonded Epoxy with High Temperature Resistant Overcoating – Utilizing two completely separate powder systems, the facility can produce FBE with a high operating temperature resistant overcoating such as DuPont’s Nap-Gard Gold and 3M’s 6258.
Fusion Bonded Epoxy with Zap-Wrap Overcoating – The facility is capable of processing line pipe with connections and of applying the Zap-Wrap abrasion resistance overcoating to the ends of each pipe.
ASTM A950: Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling.
ASTM A972: Standard Specification for Fusion-Bonded Epoxy-Coated Pipe Piles.
CSA-Z245.20 Standard for External Fusion Bond Epoxy Coating for Steel Pipe
AS 3862 Standard Specification for External Fusion-Bonded Epoxy Coating for Steel Pipes
AWWA C213 Standard for Fusion Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines.
EN 10289 Steel Tubes and Fittings for Onshore and Offshore Pipelines-External Liquid Epoxy and Epoxy-Modified Coating
ISO 21809-2 Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems-Part 2: Fusion-bonded epoxy coatings
ISO 12944 Paints & Varnishes – Corrosion Protection of Steel Structures by protective paint system (parts 1 – 8)
ISO 20340 Paints and varnishes – Performance requirements for protective paint systems for offshore and related structures
ISO 15741: Paints and Varnishes - Friction-Reduction Coatings for the Interior of On-and Offshore Steel Pipelines for Non-Corrosive Gas.
NACE RP0394-2002: Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating.
Coating Material Applied
3M: SK 134, SK6233, SK6352 Toughkote, SK 314, SK 323, SK 206N, SK 226N, SK 6251 DualKote SK-6171, SK 206P, SK226P,
3M Internal Coatings: Coupon EP2306HP
DuPont: 7-2500, 7-2501, 7-2502, 7-2508, 7-2514, 7-2803, 7-2504 Nap Gard Gold 7-2504, Nap Rock: 7-2610, 7-2617 FBE Powders
DuPont: Repair Kits; 7-1631, 7-1677, 7-1862, 7-1851
DuPont Internal Coatings: 7-0008, 7-0010, 7-0014, 7-0009SGR, 7-0009LGR, 7-2530, 7-2534, 7-2509
Akzo Nobel: Interzone 485,Interzone 505,Interzone 954,Internline 876 Seal Coat
Hampel: 85448,97840
Denso: 7200, 7900 High Service Temperature Coatings
Internal Liquid Epoxy: Powercrete Superflow

Product Image

API 2B Certified LSAW welded carbon steel pipes used in pile structures
API 2B Certified LSAW welded carbon steel pipes used in pile structures

















EN 10225 355,API 2H,API 2W,API 2Y GR.50 STEEL PLATE SPECIFICATION
EN 10225 355,API 2H,API 2W,API 2Y GR.50 STEEL PLATE SPECIFICATION

EN 10225 460-API 2H-2W-2Y GR.60 STEEL PLATE SPECIFICATION
EN 10225 460-API 2H-2W-2Y GR.60 STEEL PLATE SPECIFICATION

Related Products
API 5L,ASTM A53,AS 1163,EN 10217-2,EN 10219-1,EN 10224,EN 10255 ERW Pipe
API 5L,ASTM A53,AS 1163,EN 10217-2,EN 10219-1,EN 10224,EN 10255 ERW Pipe
US $ 595
API 5L,AS 2885.1,ISO 3183,CSA Z245.1,EN 10208-2,GOST 10704,IPS-M-PI-190 ERW Pipe
API 5L,AS 2885.1,ISO 3183,CSA Z245.1,EN 10208-2,GOST 10704,IPS-M-PI-190 ERW Pipe
US $ 615
API 5L X60M PSL2/EN 10208-2 L415MB/DNV OS-F101 SAWL 415 UOE STEEL PIPE
API 5L,AS 2885.1,ISO 3183,EN 10208-2,DNV-OS-F101,GOST 20295 JCOE SAWL PIPE
US $ 725
API 5L X52 PSL2/AS 1163 C350L0/EN 10208-2 L360MB/EN10219-1 S355J0H SAWL STEEL PIPE
API 5LPSL1/PSL 2,AS 2885.1,ISO 3183-1/2/3,EN10208-1,DNV-OS-F101 UOE SAWL PIPE
US $ 655

Company Profile  |  Products  |  Reference List  |  Association Membership  |  Company News  |  Quality Policy  |  HSE  |  EPCM  |  Catalogue  |  Pipe Specification  |  Coating Specification  |  Pipe Fitting Specs  |  API Specification  |  AS(Australian Standards)  |  DIN(Deutsche Institut für Normun)  |  EN(Europaischen Normen)  |  GOST Specification  |  NF(Norme Francise)  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap