3.11-88 |
List of Russian Steel and Non-Ferrous GOSTs Unified system for technological documentation. Rules for making graphic documents of forging pieces |
4.43-86 |
Product-quality index system. Castings. Index nomenclature |
82-70 |
Universal hot-rolled steel wide strips. Dimensions. |
89-73 |
Rolled-in lead sheets. Specifications |
103-76 |
Hot-rolled steel strip. Dimensions. |
123-98 |
Cobalt. Specifications |
193-79 |
Copper ingots. Technical requirements. |
285-69 |
Barbed monobasic fluted wire. Specifications. |
295-98 |
Aluminium for desoxydation; manufacture of ferroalloys and aluminothermy. Specifications |
380-94 |
Common quality carbon steel. Grades. |
398-96 |
Carbon steel bandages for rolling stock of wide gauge railways and metro. Specifications. |
434-78 |
Copper rectangular wire and bars for electrical use. Specifications. |
492-73 |
Nickel, nickel and copper-nickel alloys treated under pressure. Grades. |
493-79 |
Tinless foundry bronzes. Grades. |
494-90 |
Brass tubes. Specifications |
495-92 |
Copper sheets and ribbons. Specifications. |
503-81 |
Cold rolled low-carbon steel strip. Specifications. |
529-78 |
Radiator tubes. Specifications |
535-88 |
Common quality carbon bar and shaped sections. General specifications. |
546-88 |
Copper cathodes. Specifications. |
546-2001 |
Copper cathodes. Specifications |
550-75 |
Seamless steel tubes for petroleum processing and petrochemical industry. Specifications. |
598-90 |
General-purpose zinc sheets. Specifications |
613-79 |
Tin foundry bronzes. Grades. |
614-97 |
Casting bronzes in pigs. Specifications |
617-90 |
Copper tubes. Specifications |
618-73 |
Aluminium foil for technical purpouses. Specifications |
631-75 |
Internal-external upset drill pipes with couplings. Specifications. |
632-80 |
Casing pipes with couplings. Technical conditions. |
633-80 |
Tubing pipes and couplings for them. Specifications. |
745-2003 |
Aluminium foil for packing. Specifications |
767-91 |
Copper anodes. Specifications |
792-67 |
Low-carbon wire of quality. Specifications. |
800-78 |
Bearing tubes. Technical requirements. |
801-78 |
Ball-bearing steel. Technical conditions. |
803-81 |
Hot-rolled strips out of carbon high-grade steel for plating. Specifications. |
804-93 |
Primary magnesium ingots. Specifications. |
805-95 |
Steelmaking pig iron. Specifications. |
808-70 |
Flattened steel strip for wound rollers. Specifications. |
849-97 |
Primary nickel. Specifications. |
859-2001 |
Copper. Grades |
860-75 |
Tin. Specifications. |
931-90 |
Brass shetts and strips. Specifications |
949-73 |
Small and medium volume Steel Cilinders for Gases by Pp <= 19,6 MPa (200 kgs/sm2). Specifications. |
977-88 |
Steel castings. General specification. |
1018-77 |
Bands aluminium, copper, brass and cupronikel for capsules. Specification. |
1020-97 |
Casting brass in pigs. Specifications |
1048-79 |
Strips of aluminium for springs. Specifications. |
1049-74 |
Manganese nickel wire. Specifications. |
1050-88 |
Carbon structural quality steel gauged bars with special surface finish. General specifications. |
1051-73 |
Gauged bars. General specifications. |
1060-83 |
Cold-deformed seamless steel tubes for shipbuilding. Specifications. |
1066-90 |
Brass wire. Specifications. |
1071-81 |
Heat-treated steel spring wire. Technical specification. |
1089-82 |
Antimony. Specifications. |
1131-76 |
Strained aluminium alloys in pigs. Technical requirements. |
1133-71 |
Forged round and square steel. Dimensions. |
1150-72 |
Boiler zinc plates. Specifications |
1173-93 |
Copper strips. Specifications. |
1180-91 |
Zinc anodes. Specifications |
1208-90 |
Pressed bronze tubes. Specifications |
1209-90 |
Calcium babbits in pigs. Specifications. |
1215-79 |
Malleable iron castings. General specifications |
1292-81 |
Lead-antimony alloys. Specifications. |
1293.15-90 |
Antimonous lead alloys. Spectrographical method for determination of nickel. |
1320-74 |
Tin and lead babbits. Specifications. |
1412-85 |
Flake graphite iron for castings. Grades |
1414-75 |
Constructional rolled steel of improved and high cutting machinability. Specifications. |
1435-90 |
Bars, strips and reels of tool unalloyed steel. General specifications. |
1435-99 |
Bars, strips and reels of tool unalloyed steel. General specifications. |
1452-2003 |
Screw cylindrical springs for truks and draw-and buffer gears of railway rolling stock. Specifications |
1467-93 |
Cadmium. Specifications. |
1468-90 |
Cadmium anodes. Specifications |
1525-91 |
Rods of Monel. Specifications |
1526-81 |
Steel zinc-coated wire electrik wire and cable armouring. Technical conditions. |
1535-91 |
Copper rods. Specifications. |
1577-93 |
Rolled sheets and wide strips of structural quality steel. Specifications. |
1583-93 |
Aluminium casting alloys. Specifications. |
1585-85 |
Antifriction iron for castings. Grades |
1628-78 |
Bronze rods. Specifications |
1639-93 |
Non-ferrous metals and alloys scrap and waste. General specifications. |
1668-73 |
Steel zinc-coated wire for aerial communication lines. Specifications. |
1761-92 |
Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications |
1789-70 |
Beryllium bronze strips and ribbons. Specificationc |
1790-77 |
Wire of chomel, alumel, copel and constantan for thermoelectrodes of thermoelectrical transducers. Specifications. |
1791-67 |
Nickel an copper-nickel alloys wire for extension leads for thermoelectric temperature transdusers. Specifications. |
2060-90 |
Brass rods. Specifications. |
2132-90 |
Nickel anodes. Specifications |
2169-69 |
Technical silicon. Specifications. |
2170-73 |
Strips of nickel and low alloys. Specifications. |
2171-90 |
Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade definition |
2179-75 |
Nickel and siliceous nickel wire. Specifications. |
2205-71 |
L-90 tapes and strips plating. Specifications. |
2208-91 |
Brass strips for general use. Specifications. |
2246-70 |
Welding steel wire. Specifications. |
2283-79 |
Cold-rolled tool and spring steel strip. Specifications. |
2284-79 |
Cold-rolled carbon structural steel strip. Specifications. |
2333-80 |
Steel wire. Types. |
2581-78 |
Magnesium alloys ingots. Specifications. |
2584-86 |
Copper and copper alloys trolley wires. Specifications |
2590-88 |
Round steel bars. Dimensions. |
2591-88 |
Square hot-rolled steel bars. Dimensions. |
2601-84 |
Welding of metals. Terms and definitions of basic concepts. |
2622-75 |
Manometric tubes made of bronzo ����4-0,25 and brass �63. Specifications. |
2624-77 |
Capillary copper and brass tubes. Technical conditions. |
2771-81 |
Cold-drawn round wire. Gauge. |
2787-75 |
Ferrous secondary metal. General technical requirements. |
2856-79 |
Casting magnesium alloys. Grades. |
2879-88 |
Hot-rolled hexagonal steel. Dimensions. |
2936-75 |
Palne-oval seamless radiator tubes. Specifications. |
3110-74 |
Steel spoke wire. Specifications. |
3120-75 |
Steel wire rofes for aircraft. The technigie of prelongation. |
3225-80 |
Rough tyres for locomotives of broad-gauge railways. Types and dimensions. |
3262-75 |
Water-supply and gas-supply steel pipes. Technical condinions. |
3280-84 |
Plates for spike fastening of railway. Specifications. |
3282-74 |
General-purpose low-carbon steel wire. Specifications. |
3339-74 |
Woven-wire sieve for grain. Specifications. |
3443-87 |
Cast iron castings with graphite of different form. Methods of structure determination |
3559-75 |
Steel strip for armouring cables. Specifications. |
3560-73 |
Package steel strip. Specifications. |
3640-94 |
Zinc. Specifications. |
3728-78 |
Tubes. Method of bend-over test |
3778-98 |
Lead. Specifications |
3788-98 |
Lead. Specifications. |
3822-79 |
Bimetallic copper-steel wire. Specifications. |
3836-83 |
Electrotechnical unalloyed steel thin sheet and bands. Specifications. |
3845-75 |
Metallic tubes. Hydraulic pressure testing method |
3875-83 |
Steel card wire. Specifications. |
3882-74 |
.Sintered hard alloys. Types. |
3920-70 |
Tinned steel cable wire. Specifications. |
4004-64 |
Aluminium ingots for wire. Specifications. |
4041-71 |
Rolled plates of high quality structural steel for cold stamping. Specifications. |
4121-96 |
Crane rails. Specifications. |
4133-73 |
Joint bars rails of gauge railway. Technical requirements. |
4134-75 |
Copper alloys sections for collectors of electrical machines. Specifications. |
4405-75 |
Hot-rolled and wrought tool steel strips. Dimensions. |
4411-79 |
Hardmetal products for mining tools. Technical requirements. |
4442-72 |
Bands and strips of lead brass. Specifications. |
4491-86 |
Cast wheel centres for railway rolling stock of 1520 mm gauge. General specifications. |
4515-93 |
Copper phosphorous alloys. Specifications. |
4543-71 |
Structural alloy steel bars. Specifications. |
4658-73 |
Mercury. Specifications. |
4727-83 |
Bearing wire. Specifications. |
4728-96 |
Axle billets for 1520 mm gauge railway rolling stock. Specifications. |
4748-92 |
Silicon-manganese bronze strip and ribbons. Specifications |
4752-79 |
Copper cylinder wire. Technical conditions. |
4757-91 |
Ferrochrome. Specification and delivery conditions. |
4759-91 |
Ferromolybdenum. Specifications and conditions of delivery |
4761-91 |
Ferrotitanium. Specifications and conditions of delivery |
4762-71 |
Silico-calcium. Specifications. |
4781-85 |
Hot-rolled steel shapes for sheet piles. Specifications. |
4784-97 |
Aluminium and wrought aluminium alloys. Grades |
4832-95 |
Foundry cast iron. Specifications. |
4986-79 |
Cold-rolled strips of corrosion-resistant and heat-resistant steel. Specifications. |
5000-83 |
Rough tyres for railway cars and tenders of 1520 mm gauge. Dimensions. |
5005-82 |
Electro-welded cold-deformed steel pipes for cardan shafts. Specifications. |
5017-74 |
Wrought in bronze. Grades. |
5063-73 |
Ribbons of cupro-nickel alloys. Specifications. |
5157-83 |
Hot-rolled sections for different purposes. Dimensions. |
5169-77 |
Brass capsule strips. Specifications |
5187-2003 |
Nickel silver, German silver and Monel tapes. Specifications |
5189-75 |
Constantan strips. Specifications. |
5210-95 |
Roller sectiions of tool steel for files, graters, chisels and cape chisels. General specifications. |
5220-78 |
Nickel silar wire. Technical requirements. |
5221-77 |
Tin-zinc bronze wire. Specifications. |
5222-72 |
Silicon-manganese bronze wire. Specifications. |
5257-98 |
Rough carbon steel tyres for tramway rolling stock. Specifications. |
5267.0-90 |
Hot-rolled sections for car building. General specifications. |
5267.1-90 |
Channels. Dimensions. |
5267.2-90 |
Z-section. Dimensions. |
5267.3-90 |
Z-section for centre girder. Dimensions. |
5267.4-90 |
Section of upper binding. Dimensions. |
5267.5-90 |
I-beam section No. 19 for centre girder. Dimensions. |
5267.6-90 |
Section of car post. Dimensions. |
5267.7-90 |
Section of upper sheet of open-box car frame cross beam. Dimensions. |
5267.8-90 |
Section of automatic coupling thrust plates. Dimensions. |
5267.9-90 |
Section for automatic coupling wedge. Dimensions. |
5267.10-90 |
Section of tread pings. Dimensions. |
5267.11-90 |
Section of car threshold. Dimensions. |
5267.12-90 |
Section for door closing. Dimensions. |
5267.13-90 |
Section for door binding. Dimensions. |
5307-77 |
Constant noninsuloted wire. Technical requirements. |
5362-78 |
Brass ribbons. Specifications.. |
5422-73 |
Hot-rolled special steel sections for tractors. Technical specifications. |
5437-85 |
Reed wire. Specification. |
5468-88 |
Needle wire. Specifications. |
5494-95 |
Pigmentary aluminium. Specifications |
5497-80 |
Cold-rolled steel for saws of cottenscrubbering machines. Technical conditions. |
5520-79 |
Rolled carbon low-alloy and alloy steel sheet and plates for boilers and pressure vessels. Specifications. |
5521-93 |
Rolled steel for shipbuilding. Specifications. |
5525-88 |
Pig iron connecting parts manufactured by pouring into sand moulds for pipelines. Specifications |
5529-75 |
Brass round wire for shoe industry. Specifications. |
5582-75 |
Stainless and Heat-Resisting Sheet. Specifications. |
5632-72 |
High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades. |
5638-75 |
Copper roll foil for technical purposes. Specifications. |
5654-76 |
Steel seamless hot-deformed tubes for shipbuilding. Specifications. |
5663-79 |
Cold heading carbon steel wire. Technical reguirements. |
5781-82 |
Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications. |
5812-82 |
Fastening for broad gauge railways. Technical specifications. |
5876-82 |
Type R18 and R24 narrow-gauge railway rails. Technical requirements. |
5905-79 |
Metal chromium. Specifications. |
5905-2004 |
Metal chrome. Technical requirements and conditions of delivery |
5949-75 |
Sorted and gauged corrosion-resistant, heat-resistant and high-temperature steel. Specifications. |
5950-2000 |
Tool alloy steel bars, strips and coils. General specifications. |
6009-74 |
Hot-rolled steel strips. Specifications. |
6143-78 |
Axle billets for tram cars. Specifications. |
6235-91 |
Strips and ribbons of nickel. Specifications |
6238-77 |
Casing and coring pipes for geology-exploring drilling and nipples for them. Specifications. |
6368-82 |
Type R8, R11, R18 and R24 narrow-gauge railway rails. Design and dimensions. |
6511-60 |
Wrought stannic-zinc bronze rods. Specifications |
6563-75 |
Technical articles made of noble metals and their alloys. Specifications. |
6681-91 |
Brass bars of rectangular section. Specifications |
6688-91 |
Brass bars of rectangular section. Specifications |
6713-91 |
Low-alloyed structural rolled stock for bridge building. Specifications. |
6727-80 |
Cold-drawn low-carbon steel wire for reinforced concrete. Specifications. |
6765-75 |
Hot rolled three-layer steel and wide steel strip (universal). Specifications. |
6835-2002 |
Golg and gold base alloys. Marks. |
6836-2002 |
Silver and silver base alloys. Marks. |
6856-54 |
Special section steel pipes. |
6902-75 |
Gold and silver foil in the form of book. Specifications. |
7056-77 |
The plates of spike fastening for type P43 rails. Construction and dimensions. |
7062-90 |
Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances |
7173-54 |
P43-type railway rails for industrial transport rails. Construction and dimensions. |
7174-75 |
Railway rails type P50. Construction and dimensions. |
7221-80 |
Strips of gold, silver and their alloys. Specifications. |
7222-75 |
Wire of gold, silver and their alloys. Specifications. |
7293-85 |
Spheroidal graphite iron for castings. Grades |
7348-81 |
Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications. |
7350-77 |
Steel thick sheet, corrosion-resistant, heat-resistant Technical conditions. |
7370-98 |
Railroad frogs of P75, P65, P50 types. Specifications. |
7372-79 |
Steel wire for ropes. Specifications. |
7417-75 |
Calibrated round steel. Dimensions. |
7419-90 |
Steel hot-rolled products for springs. Range. |
7480-73 |
Polygraphic wire. Specifications. |
7505-89 |
Steel stamping forgings. Tolerances, allowances and forging laps |
7511-73 |
Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications. |
7524-89 |
Grinding steel balls for ball mills. Specifications. |
7564-97 |
Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing. |
7565-81 |
Ipon, steel and alloys. Sampling method for determination of chemical composition. |
7566-94 |
Metal products. Acceptance, marking, packing, transportation and storage. |
7769-82 |
Alloy cast iron for castings of special properties. Grades |
7829-70 |
Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances. |
7909-56 |
Drill prospecting pipes and sockets for them. Specifications. |
8036-79 |
Tombac strips. Specifications. |
8141-56 |
Fasteners for narrow gauge railways. Fishplates. General specifications. |
8142-89 |
Railway plates for R18, R24 and R33 rails types. Specifications. |
8161-75 |
Railway rails type P65. Design and dimensions. |
8193-73 |
Double headed fishplates for P65, P75 rails. Design and dimensions. |
8194-75 |
Plates of spike fastening for railway R65 and R75 rails. Design and dimensions. |
8239-89 |
Hot-rolled steel flange beanis. Dimensions. |
8240-97 |
Hot-rolled steel channels. Rolling products. |
8278-83 |
Steel roll-formed channels. Dimensions. |
8281-80 |
Roll-formed steel unequal channels. Dimensions. |
8282-83 |
Bent-steel C-shaped equai flange sections. Dimensions. |
8283-93 |
Bent steel hat equal sections. Dimensions. |
8319.0-75 |
Hot-rolled steel periodical lengthwise-rolled sections. Specifications. |
8319.2-75 |
Hot-rolled steel periodical lengthwise-rolled sections for front axle of ���-130 automobile. Dimensions. |
8319.4-75 |
Hot-rolled steel periodical lengthwise-rolled sections for front axle of ���-672 and ���-3205 bus. Dimensions. |
8319.5-75 |
Hot-rolled steel periodical lengthwise-rolled sections for front of ��� and ���� automobiles. Dimensions. |
8319.6-75 |
Hot-rolled steel periodical lengthwise-rolled sections for crankshaft of ���-69 automobile. Dimensions. |
8319.8-75 |
Hot-rolled steel periodical lengthwise-rolled sections for axle of 1-��-1,5, �2-���, ����-739 automobile trailers. Dimensions. |
8319.11-75 |
Hot-rolled steel periodical lengthwise-rolled sections for axle of a spreader. Dimensions. |
8319.12-75 |
Hot-rolled steel periodical lengthwise-rolled sections for axle of a farm trailer. Dimensions. |
8319.13-75 |
Hot-rolled steel periodical lengthwise-rolled sections for front axle of ���-53-12 automobile. Dimensions. |
8320.0-83 |
Periodic sections produced by cross-helical rolling. General specifications. |
8320.1-83 |
Periodic three-step sections produced by cross-rolling for electric motor shafts. Dimensions. |
8320.2-83 |
Periodic quadristep sections produced by cross-gelical rolling for electric motor shafts. Dimensions. |
8320.3-83 |
Periodic pentastep sections produced by cross-helical rolling for electric motor shafts. Dimensions. |
8320.4-83 |
Periodic heptastep sections produced by cross-helical rolling for electric motor shafts. Dimensions. |
8320.5-83 |
Periodic sections produced by cross-helical rolling for semi-shafts of turbo-compressors. Dimensions. |
8320.6-83 |
Periodic sections produced by cross-helical rolling for gear shaft. Dimensions. |
8320.7-83 |
Periodic sections produced by cross-helical rolling for tractors. Dimensions. |
8320.8-83 |
Periodic sections produced by cross-helical rolling for automobile building. Dimensions. |
8320.9-83 |
Periodic sections produced by cross helical rolling for bus front axle beam. Dimensions. |
8320.10-83 |
Periodic sections produced by cross-helical rolling for road machines. Dimensions. |
8320.11-83 |
Periodic sections produced by cross-helical rolling for turret shaft of lathe, model 1341. Dimensions. |
8320.12-83 |
Periodic sections produced by cross-helical rolling for axles of narrow gauge railway cars. Dimensions. |
8320.13-83 |
Periodic sections produced by cross-helical rolling for journals of flour-grinding rolls. Dimensions. |
8467-83 |
Steel drill pipes for core drilling. Specifications. |
8478-81 |
Welded meshes for reinforced concrete structures. Specifications. |
8479-70 |
Structural carbon and alloyed steel forgings. General specifications. |
8509-93 |
Hot-rolled steel equal-leg angles. Dimensions. |
8510-86 |
Hot-rolled steel unequal-leg angles. Dimensions. |
8559-75 |
Calibrated square steel. Dimensions. |
8560-78 |
Calibrated hexahedronal rolled-stock. Dimensions. |
8568-77 |
Corrugated steel rhombic and lentil form sheets. Specifications. |
8617-81 |
Pressed sections of aluminium and aluminium alloys. Specifications |
8639-82 |
Square steel tubes. Range. |
8642-68 |
Oval steel tubes. Range. |
8644-68 |
Flat-sided oval steel tubes. Range. |
8645-68 |
Rectangular steel tubes. Range. |
8646-68 |
Empty-ribbed steel tubes. Range |
8694-74 |
Tubing. Expansion testing method. |
8695-75 |
Tubing. Flattening testing method |
8696-74 |
General-purpose electrically-welded spiral seam steel pipes. Specifications. |
8731-87 |
Seamless hot-deformed steel pipes. Specifications. |
8732-78 |
Seamless hot-deformed steel pipes. Range of sizes. |
8733-87 |
Seamless cold-deformed and thermal-deformed steell pipes. Specifications. |
8734-75 |
Seamless steel tubes cold deformed. Range. |
8774-75 |
Lithium. Specification. |
8786-68 |
Cold-drawn steel for Woodruff keys. Dimensions. |
8787-68 |
Cold-drawn steel for rectangular parallel keys. Dimensions. |
8803-89 |
High electric resistance precision alloys minimum diameter round wire for resistors. Specifications. |
8851-75 |
Strip of steel grades 11kp and 11JuA. Specifications. |
8943-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Nomenclature |
8944-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Technical requirements. |
8946-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Union passage elbews. Basic dimensions |
8947-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Transition angles. Basic dimensions |
8948-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Straight tees. Basic dimensions |
8949-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Transition tees. Basic dimensions. |
8950-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Tees with two passages. Basic dimensions |
8951-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Straight fowr-way junction pieces. Basic dimensions |
8952-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Transition fowr-way junction pieces. Basic dimensions |
8953-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Fowr-way junction pieces with two passages. Basic dimensions |
8954-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Straight short sockets. Basic dimensions |
8955-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Straight long sockets. Basic dimensions |
8956-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Compensation sockets. Basic dimensions |
8957-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Transition sockets. Basic dimensions |
8958-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Double nipples. Basic dimensions |
8960-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Threaded bushings. Basic dimensions |
8961-74 |
Ductile iron and steel fittings with parallel thread for pipelines. Locknuts. Basic dimensions |
8962-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Caps. Basic dimensions |
8963-75 |
Ductile iron and steel fittings with parallel thread for pipelines. Plugs. Basic dimensions |
8965-75 |
Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Technical requirements. |
8966-75 |
Pipe steel connections with cylinlrical thred for pipelines P=1,6 MPa. Straight sockets. Basic dimensions. |
8967-75 |
Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Nippels. Basic dimensions. |
8968-75 |
Pipe steel connections winh cylindrical thread for pipelines P=1,6 MPa. Zock-nuts. Basic dimensions. |
8969-75 |
Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Adapter coupling. Basic dimensions. |
9036-88 |
Solid-rolled wheels. Design and dimensions. |
9045-93 |
Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications. |
9124-85 |
Tinned band steel wire. Specifications. |
9161-85 |
Harness Wire. Specifications. |
9234-74 |
Steel roll-sheet sections with trapezoid-shaped corrugation. Dimensions. |
9235-76 |
Hot-rolled steel symmetrical bulb for shipbuilding. Dimensions. |
9389-75 |
Carbon steel spring wire. Specifications. |
9498-79 |
Flat ingots aluminium and wrought aluminium alloys for rolling. Specifications. |
9559-89 |
Lead sheets. Specifications. |
9567-75 |
Precision steel tubes. Range. |
9583-75 |
Cast iron pressure pipes made by centrivugal and semi continuous casting method. |
9722-97 |
Nickel powder. Specifications. |
9723-73 |
Tin powder. Specifications. |
9731-79 |
Steel seamless cylinders of large capacity for gases for Pw�24,5 MPa (250 kgf/cm2). Specifications. |
9797-85 |
Rails for RK50 check rails. Dimensions. |
9798-85 |
Rails for RK65 check rails. Dimensions. |
9849-86 |
Iron powder. Specifications. |
9850-72 |
Zink-coated core wire for conductors. Specifications. " |
9940-81 |
Seamless hot deformed tubes made of corrosion resistant steel. |
9941-81 |
Seamless cold- and warm-deformed tubes of corrosion-resistant steel. Specifications. |
9960-85 |
Switch point rails. Specifications. |
10006-80 |
Metal tubes. Tensile test method |
10025-78 |
Tin-phosphor bronze rods. Specifications |
10052-75 |
Metal covered electrodes for manual welding of high-alloyed steels with special properties. Types. |
10092-75 |
Cupro-nickel tubes for heat-exchanging apparatus. Specifications |
10155-75 |
Manganin uninsulated wire. Specifications. |
10160-75 |
Magnetically soft precision alloys. Specifications. |
B 10230-75 |
Structural and alloy rolled steel for special purpose |
10234-77 |
Moderate strength flattened steel strip. Specifications. |
10297-94 |
Indium. Specifications. |
10298-79 |
Technical selenium. Specifications. |
10498-82 |
Especially thin-wailed seamless tubes from corrosion resistant steel. Technical conditions. |
10505-76 |
Closed steel wire rods for lifting purposes. Specifications. |
10506-76 |
Hoist closed wire ropes. Assortment. |
10510-80 |
Metals. Erikson test method for sheets and strips extrusion. |
10533-86 |
Cold-rolled thermostatic bimetallic strip. Specifications. |
10543-98 |
Steel surfacing wire. Specifications |
10551-75 |
Steel roll-formed corrugated sections. Range. |
10702-78 |
Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications. |
10703-73 |
Aluminium sheets for hraphic arts industry. Specifications. |
10704-91 |
Electrically welded steel line-weld tubes. Range. |
10705-80 |
Electrically welded steel tubes. Specifications. |
10706-76 |
Electrically welded steel line tubes. Technical requirements. |
10707-80 |
Steel cold formed electrically welded tubes. Technical conditions. |
10791-2004 |
All-rolled wheels. Specifications |
10821-75 |
Wire made of platinum and platinum-rhodium alloys for thermoelectric temperature transducers. Specifications. |
10884-94 |
Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications. |
10885-85 |
Hot-rolled corrosion-resistant clad steel sheets. Specifications. |
10928-90 |
Bismuth. Specifications. |
10988-75 |
Oxygen-free copper bars for electrovacuum industry. Specifications |
10994-74 |
Precision alloys. Grades. |
11017-80 |
Steel ceamless tubes for high pressure service. Technical conditions. |
11036-75 |
Electrotechnical quality unalloyed steel. Specifications. |
11068-81 |
Electrically tubes made of corrosion resistant steel. Specifications. |
11069-2001 |
Primary aluminium. Grades |
11070-74 |
Primary aluminium ingots. Specifications. |
11249-80 |
Steel rolled up soldered double-layer tubes. Technical conditions. |
11268-76 |
Alloyed structural high-grade rolled steel sheets for special purposes. Specifications. |
11269-76 |
Universal alloyed structural high-grade rolled steel plates and wide strips for special purposes. Specifications. |
11383-75 |
Thin-walled copper and brass tubes. Specifications. |
11474-76 |
Steel roll-formed sections. Specifications. |
11706-78 |
Tubes. Method the tensile test of ring by cone |
11739.11-98 |
Aluminium casting and wrought alloys. Methods for determinating of magnesium. |
11739.12-98 |
Aluminium casting and wrought alloys. Methods for determinating of manganese. |
11850-72 |
Steel wire for spring washers. Specifications. |
11964-81 |
Cast iron and steel shot for industrial use. General specifications. |
12004-81 |
Reinforcing-bar steel. Tensile test methods |
12132-66 |
Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications. |
12135-75 |
The plates of spike fastening for railway rails P50. Design and dimensions. |
12247-80 |
Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/sq.cm). Specifications. |
12338-81 |
Iridium in powder. Specifications |
12339-79 |
Osmium in powder. Specifications |
12340-81 |
Palladium in ingots. Specifications. |
12341-81 |
Platinum in ingots. Specifications. |
12342-81 |
Rhodium in powder. Specifications |
12343-79 |
Ruthenium in powder. Specifications |
12359-99 |
Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen. |
12492.0-90 |
Agricultyral machinery. Rolled steel. General specifications. |
12492.1-90 |
Agricultural machinery. Channel section. Dimensions. |
12492.2-90 |
Agricultural machimery. Low-channel section. Dimensions. |
12492.3-90 |
Agricultural machinery. Bulged strip section. Dimensions. |
12492.4-90 |
Agricultural machinery. One-notched section. Dimensions. |
12492.5-90 |
Agricultural machinery. Section for wheel rims. Dimensions. |
12492.6-90 |
Agricultural machinery. Ribbed bar strip section. Dimensions. |
12492.7-90 |
Agricultural machintry. Section for marsh plough cutters. Dimensions. |
12492.8-90 |
Agricultural machinery. Rounded strip section. Dimensions. |
12492.9-90 |
Agricultural machinery. Section for subsurface cultivator wings. Dimensions. |
12492.10-90 |
Agricultural machinery. Trapezoidal section for points. Dimensions. |
12492.11-90 |
Agricultural machinery. Section for upper ring of trailer slewing plate. Dimensions. |
12492.12-90 |
Agricultural machinery. Section for ring of trailer slewing plate. Dimensions. |
12492.13-90 |
Agricultural machinery. C-shaped section. Dimensions. |
12492.14-90 |
Agricultural machinery. Section for end transmission case. Dimensions. |
12492.15-90 |
Agricultural machinery. Bevelled strip section. Dimensions. |
12501-67 |
Tubes. Twisting moment test method |
12502-67 |
Rolled stock of ferrous metals. Standards of weighimg accuracy |
12601-76 |
Zinc powder. Specifications. |
12766.1-90 |
High electric resistance wire of precision alloys. Specifications. |
12766.2-90 |
Strip of high electric resistance precision alloys. Specifications. |
12766.3-90 |
Precision gauged alloys of high electric resistance. Specifications. |
12766.4-90 |
Graded rolled steel of precision alloys of high electric resistance. Specifications. |
12766.5-90 |
Flattened strip of high electric resistance precision alloys. Specifications. |
12797-77 |
Gallium technical. Technical requirements. |
12815-80 |
Flanges for valves, fittings, pipelines for Pnom from 0.1 to 20 MPa (from 1 to 200kgf/sm2). Types. Connecting dimensions |
12820-80 |
Welded flat steel flanges for Pc from 0.1 to 2.5 MPa ( from 1 to 25kgs/sm2). Construction and dimensions. |
12821-80 |
Butt welded steel flanges for Pc from 0.1 to 20 MPa ( from 1 to 200 kgs/sm2). Construction and dimensions. |
12920-67 |
Brass wire for cold upsetting. Specifications. |
13073-77 |
Zinc wire. Specifications. |
13083-77 |
Rods of nickel and nickel-silicon alloys. Technical requirements |
13098-67 |
Rhodium. Grades. |
13099-67 |
Iridium. Grades. |
13229-78 |
Steel roll-formed Z-shaped sections. Dimensions. |
13345-85 |
Tin-plate and black plate. Specifications. |
13462-79 |
Palladium and palladium alloys. Trade-marks. |
13498-79 |
Platinum and platinum alloys. Trade-marks. |
13548-77 |
Thin-walled tubes of nickel and nickel alloys. Specifications. |
13616-97 |
Extruded rectangular sheet-section shapes of aluminium, aluminiumand magnesium alloys. Dimensions. |
13617-97 |
Extruded bulb-shaped angle-section shapes of aluminium, aluminium and magnesium alloys. Dimensions. |
13618-97 |
Extruded oblique-angled fitting angle-section shapes of aluminium, aluminium and magnesium alloys. Dimensions. |
13619-97 |
Extruded rectangular Z-section shapes of aluminium, aluminium and magnesium alloys. Dimensions. |
13663-86 |
Shaped steel tubes. Technical requirements. |
13726-97 |
Aluminium and aluminium alloys strips. Specifications. |
13737-90 |
Extruded rectangular equishelf angle-section shapes of aluminium and magnesium alloys. Dimensions. |
13843-78 |
Rod aluminium wire. Technical conditions. |
14080-78 |
Precision alloy strip with specified temperature coefficient of linear expansion. Specifications. |
14081-78 |
Wire of precisions alloys with specified temperature coefficient of linear expansion. Specifications. |
14082-78 |
Bars and plates of precision alloys with assigned temperature coefficient of linear expansion. Specifications. |
14113-78 |
Aluminium antifriction alloys. Grades. |
14117-85 |
Tape of precision alloys for elastic elements. Specifications. |
14118-85 |
Wire from precision alloys for elastic elements. Specifications. |
14119-85 |
Bars from precision alloys for elastic elements. Specifications. |
14162-79 |
Steel tubes of small dimensions (capillary). Specifications. |
14311-85 |
Steel cord. Specifications |
14350-80 |
Roll-formed sections. Terms and definitions. |
14635-93 |
Steel cold-shaped special profiles for car building. Dimensions. |
14637-89 |
Rolled plate from carbon steel of general quality. Specifications. |
14836-82 |
Palladium in powder. Specifications |
14837-79 |
Platinum in powder/ Technical requirements |
14838-78 |
Wire out of aluminium and aluminium for cold upsetting. Technical requirements. |
14848-69 |
Ferroboron. Specifications. |
14918-80 |
Continuously galvanized sheet steel. Specifications. |
14955-77 |
Quality round steel with special surface finishing. Specifications. |
14957-76 |
Strained magnesium alloys. Grades. |
14959-79 |
Spring steel bars, carbon and alloy. Specifications. |
14963-78 |
Alloy steel spring wire. Technical pequirements. Specifications. |
15040-77 |
Oxygen-free coper pipes. Specifications. |
15146-69 |
Tape, steel, thermal-treated for musical instrument reeds. Specifications. |
15176-89 |
Extruded tyres made of aluminium and aluminium alloys for electrical technology use. Specifications |
15471-77 |
Strips and ribbons oxygen-free copper for electronics. Specifications. |
15515-70 |
Nicel electrolized strips. Specifications. |
15527-70 |
Copper zinc pressure treated alloys (brasses). Types. |
15598-70 |
Steel musik wire. Specifications. |
15830-84 |
Pressure metal working. Die-tools. Terms and definitions. |
15834-77 |
Wire of beryllium bronze. Technical conditions. |
15835-70 |
Beryllium bronze bars. Specifications. |
15860-84 |
Steel welded cylinders for liquefied hydrocarbon gases at pressure up tp 1,6 MPa. Specifications. |
15885-77 |
Tin-zinc-lead bronze ribbons and strips. Specifications. |
15891-70 |
Hot-rolled fashioned strip twolayered steel for plough-shares. Specifications. |
15892-70 |
Tie zinc-coated steel wire for aerial communications. Specifications. |
16099-80 |
Niobium in ingots. Specification. |
16100-79 |
Niobium bricks. Technical requirements. |
16118-70 |
Cylindrical helical compression (extension) springs made of round steel. Specifications |
16130-90 |
Welding wire and rods copper alloys. Specifications. |
16135-70 |
Steel wire for electronic computers. Specifications. |
16153-80 |
Monocrystalline germanium. Specifications. |
16210-77 |
Railway rails type P75. Design and dimensions. |
16277-93 |
Plates of separate fastening for railway R50, R65 and R75 rails. Specifications. |
16358-79 |
Copper strips for coaxial main cables. Specifications. |
16523-89 |
Rolled sheets from carbon quality and ordinary steel for general purposes. Specifications. |
16773-2003 |
Ferroniobium. Technical requirements and conditions of delivery |
16774-78 |
Copper tubes of rectangular and square section. Technical conditions |
16827-81 |
Two lay multistrand low-twisting rope type ��-P� construction |
17066-94 |
Rolled sheet of high-strength steel. Specifications. |
17152-89 |
Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications. |
17217-79 |
Tubes of copper-nickel alloy MNZh5-1. Specifications. |
17232-79 |
Aluminium and aluminium alloys plates. Specifications. |
17232-99 |
Aluminium and aluminium alloys plates. Specificatuions. |
17293-93 |
Ferrotungsten. Specification and conditions of delivery |
17305-91 |
Wire of carbon constructional steel. Speciaications. |
17328-78 |
Tin-free foundry bronze ingots. Technical requirements. |
17359-82 |
Powder metallurgy. Terms and definitions. |
17375-2001 |
Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
17376-2001 |
Carbon and low-alloy steel butt-welding fittings.Tees. Design |
17378-2001 |
Carbon and low-alloy steel butt-weldings. Reducers. Design |
17379-2001 |
Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
17380-2001 |
Carbon and low-alloy steel butt-weldings fittings. General specifications. |
17410-78 |
Non-destructive testing. Metal seamless cylindrical pipes and tubes. Ultrasonic methods of defect detection |
17507-85 |
Switch point rails OP65. Dimensions. |
17508-80 |
Switch point rails OP50. Dimensions. |
17576-97 |
Extruded oblique-angled trapezoidal flanged-section shapes of aluminium, aluminium and magnesium alloys. Dimensions. |
17614-80 |
Tellurium technical. Technical requirements. |
B 17646-75 |
Tubes of copper-nickel alloy |
17711-95 |
Cast copper-zinc alloys (brass). Grades |
17746-96 |
Sponge titanium. Specifications |
17809-72 |
Casting hard magnetic materials. Marks. |
18143-72 |
High-alloy corrosion-resistant and heat-resistant steel wire. Specifications. |
18175-78 |
Tin-free pressure-worked bronze. Grades. |
18232-83 |
Guard rails. Specifications. |
18267-82 |
Through hardening in oil of rails, P50, P65 and P75 types, for wide-gauge railways. Specifications. |
18327-73 |
Zinc strips for general use. Specifications. |
18337-95 |
Thallium. Specifications. |
18351-73 |
Magnesium alloy extruded rods. Specifications |
18389-73 |
Wire made of platinum and its alloys. Specifications. |
18390-73 |
Wire of palladium and its alloys. Specifications. |
18394-73 |
Tin plated lead and tin foil. Specifications. |
18475-82 |
Aluminium and aluminium alloy cold-rolled tubes. Specifications |
18482-79 |
Aluminium and aluminium alloy extruded tubes. Specifications |
18662-83 |
SVP hot-rolled section for mine timbering. Dimensions. |
18834-83 |
Magnetic wire for writing of harmonic signals. Specifications. |
18846-73 |
Zinc foil. Specifications. |
18903-73 |
Tungsten wire. Assortment. |
18905-73 |
Molibdenum wire. Assortment. |
18907-73 |
Cold-worked and heat-treated ground rods of high-alloy and corrosion-proof steel. Specifications. |
18968-73 |
Corrosion-resistant and heat-proof steel bars and strips for steam turbine blades. Specifications. |
18970-84 |
Pressure metal working. Forging, closed-die forging and stamping operations. Terms and definitions. , / |
18978-73 |
Scrap and waste of non-ferrous metals and alloys. Terms and definitions. |
19040-81 |
Metal tubes. method of tension test at high temperatures |
19127-73 |
Double headed fishplates for P43 rails. Design and dimensions. |
19128-73 |
Double headed fishplates for P50 rails. Design and dimensions. |
19200-80 |
Iron and steel castings. Terms and definitions of defects. |
19240-73 |
Rails for ground and suspended tracks. Dimensions. |
19241-80 |
Wrought nickel and low-alloy nickel. Grades. |
19265-73 |
Bars and strips of high-speed steel. Specifications. |
19277-73 |
Seamless steel tubes for oil and fuel lines. Specifications. |
19281-89 |
Rolled steel with increased strength. General specifications. |
19282-73 |
Low-alloyed plate strip universal steel. Specifications |
19351-74 |
Iridium and rhodium wire. Specifications. |
19424-97 |
Cast zinc alloys in pigs. Specifications. |
19425-74 |
Special-purpose steel I-beams and channels. Dimensions. |
19437-81 |
Cylindrical aluminium ingots. Specifications. |
19441-74 |
Magnesium-alloy extruded tubes. Specifications |
19442-74 |
Contour bars for blades and bars for coupling blades of steam turbines made of corrosion-resistant and high-temperature steel. Specifications. |
19657-84 |
Magnesium alloy pressed profiles. Specifications |
19658-81 |
Monocrystalline silicon in ingots. Specifications. |
19671-91 |
Tungsten wire for light sources. Specifications. |
19703-79 |
Brass wire of lead grade LS63-3. Specifications. |
19738-74 |
Silver solders. Types. |
19739-74 |
Strips from silver solders. Specifications. |
19746-74 |
Wire from silver solders. Specifications. |
19771-93 |
Roll-formed steel equal leg angles. Dimensions. |
19772-93 |
Roll-formed steel unequal leg angles. Dimensions. |
19807-91 |
Wrought titanium and titanium alloys. Grades. |
19807-91 |
Wrought titanium and titanium alloys. Grades. |
19851-74 |
Cold-rolled cut strip. Specifications. |
19903-74 |
Hot-rolled steel sheets. Dimensions. |
19904-90 |
Cold-rolled steel sheets. Dimensions. |
20072-74 |
Heat-resistant steel. Specifications. |
20179-74 |
Rough tyres carbon steel for the rolling stock on narrow gauge railways. Profiles and sizes. |
20295-85 |
Steel welded pipes for main gas-and-oil pipelines. Specifications. |
20495-75 |
Case-hardening of metal components. Diffusion layer characteristics and properties. Terms and definitions. |
20707-80 |
Copper and brass ribbons for radiators. Specifications. |
20900-75 |
Copper tubing for waveguides and brass right angle tubes. Specifications |
20967-75 |
Aluminium alloy rolled wire. Specifications. |
21007-75 |
Platinum wire for resistive temperature transducers, Specifications. |
21022-75 |
Chromic steel for precise bearings. Specifications. |
21026-75 |
Hot-rolled channel sections with outward flanges for trolleys. Dimensions. |
21357-87 |
Cold-resistant and wear-resistant steel castings. General specifications. |
21427.1-83 |
Cold-rolled anisotropic electrical-sheet steel. Specifications. |
21427.2-83 |
Cold-rolled isotropic electrical-sheet steel. Specifications. |
21427.4-78 |
Cold-rolled steel electrical anisotropic strip. Specifications. |
21437-95 |
Zinc antifriction alloys. Marks, Technical requirements and test methods. |
21438-95 |
Zinc antifriction alloys in pigs. Specifications. |
21448-75 |
Alloyed powders for welding deposit. Specifications. |
21449-75 |
Rods for welding deposit. Specifications. |
21488-97 |
Pressed bars of aluminium and aluminium alloys. Specifications |
21631-76 |
Sheets of aluminium alloys. Specifications. |
21646-2003 |
Copper and brass tubes for heat-exchange apparatus. Specifications |
21729-76 |
Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications. |
21910-76 |
Metals. Heat-resistance characteristics. Names, definitions, formulas for calculations and units of quentities. |
21930-76 |
Tin-lead solders in pigs. Specifications. |
21931-76 |
Tin-led solders in the form of products. Specifications. |
21937-76 |
Hot-rolled steel unsymmetrical bulb for shipbuilding. Dimensions. |
21945-76 |
Seamless hot-rolled tubes alloys based on titanium. Specifications. |
21990-76 |
Magnesium alloys plates. Specifications. |
21996-76 |
Steel cold-rolled heat-treated strip. Specifications. |
21997-76 |
High tensile steel flattened strip. Specifications. |
22178-76 |
Titanium and titanium alloys sheets. Specifications. |
22233-2001 |
Aluminium alloy extruded sections for translucent envelopes. General specifications |
22343-90 |
Clamp of indirect rail fastening of railway. Specifications. |
22366-93 |
Sintered iron-base electrode strip for surfacing. Specifications. |
22411-77 |
High-rolled and forged bars of alloys. Dimensions. |
22517-77 |
Hafnium-iodide metal. Technical requirements. |
22635-77 |
Magnesium allous sheets. Specifications. |
22666-77 |
Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications. |
22786-77 |
Bimetalic seamless tubes for ship-building. Specifications. |
22860-93 |
Cadmium of high purity. Specifications. |
22861-93 |
Lead of high purity. Specifications. |
22897-86 |
Seamless cold-deformed pipes from alloys based on titanium. Specifications. |
23137-78 |
Copper-zinc solders. Grades. |
23270-89 |
Tubes-billets for mechanical treatment. Specifications. |
23522-79 |
Cold-rolled steel strip for hach saws. Specifications. |
23697-79 |
Welded straight-seam pipes of aluminium alloys. Specifications |
23705-79 |
Hot-rolled and forged bars of heat resistant alloys. Specifications. |
23755-79 |
Plates of titanium and titanium alloys. Specifications. |
23786-79 |
Drill pipes of aluminium alloys. Specifications |
23855-79 |
Cylindrical ingots out of aluminium alloy AD31. Technical conditions. |
23886-91 |
Cadmium sheets and plates. Specifications |
23912-79 |
Alley of copper-beryllium. Technical requirements. |
24030-80 |
Corrosion-resistant steel seamless tubes for power engineering industry. Specifications. |
24045-86 |
Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications. |
24045-94 |
Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications. |
24182-80 |
Open-hearth steel rails, P75, P65 and P50 types, for wide gauge railways. Specifications. |
24244-80 |
Low carbon sheet cold-rolling for enamelled ware. Technical conditions. |
24301-93 |
Bronze and brass cast bars and tubes. Specifications. |
24353-80 |
Sheets of foil made of platinum, palladium and their alloys, irridium and rhodium. Specifications. |
24552-81 |
Foil of gold, silver and their alloys. Specifications. |
24718-81 |
Strips of platinum, palladium, their alloys, iridium and rhodium. Specifications. |
24767-81 |
Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications |
24890-81 |
Welded pipes of titanium and titanium alloys. Specifications |
24982-81 |
Rolled sheet of cirrision-resistant, heatresistant and heat-proof alloys. Specifications. |
25054-81 |
Forgings of corrosion-resistant steels and alloys. General specifications. |
25140-93 |
Zinc alloys for casting. Grades. |
25284.0-95 |
Zinc alloys. General requirements for methods of analysis. |
25284.1-95 |
Zinc alloys. Methods for determination of aluminium. |
25284.2-95 |
Zinc alloys. Methods for determination of copper. |
25284.3-95 |
Zinc alloys. Methods for determination of magnesium. |
25284.4-95 |
Zinc alloys. Methods for determination of lead. |
25284.5-95 |
Zinc alloys. Methods for determination of cadmium. |
25284.6-95 |
Zinc alloys. Methods for determination of iron. |
25284.7-95 |
Zinc alloys. Methods for determination of tin. |
25284.8-95 |
Zinc alloys. Methods for determination of silicon. |
25442-82 |
Molibdenum annealed strips for deep drawing. Specifications |
25474-82 |
Silver anodes. Specifications. |
25475-82 |
Golden anodes. Specifications. |
25501-82 |
Stocks and semifinished products of non-ferrous metals and alloys. Terms and definitions. |
25577-83 |
Steel roll-formed closed welded square and rectangular sections. Specifications. |
B 25854-83 |
Long rolled products |
25905-83 |
Aluminium foil for condensers. Specifications. |
26020-83 |
Hot-rolled steel I-beam with parallel flange edges. Dimensions. |
26110-84 |
Rails for PK75 check rails. Dimensions. |
26131-84 |
Heat-resisting steel forgings. General specifications. |
26168-84 |
Switch point rails OP75. Dimensions. |
26250-84 |
Drill pipes for borehole tools with removable core lifts. Specifications. |
26358-84 |
Cast iron castings. General specifications |
26366-84 |
Brass-plated steel wire for bead rings of tyres. Specifications. |
26467-85 |
Hard-surfacing flux-cored strip. General specifications |
26468-85 |
Wrought columbium alloys. Grades. |
26469-85 |
Palladium and tungsten alloy wire. Specifications. |
26492-85 |
Titanium and titanium alloys rolled bars. Specifications |
26645-85 |
Metal and alloy castings. Dimensions and mass tolerance and machining allowances. |
26804-86 |
Metal beam road safety barriers. Specifications |
27002-86 |
Cooking utensils of corrosion-resistant steel. General specifications |
27208-87 |
Cast iron castings. Methods of mechanical testing |
27265-87 |
Titanium and titanium alloys filler wire. Specifications. |
27266-87 |
Molybdenum wire for light sources. Specifications. |
27772-88 |
Structural stee structure rolled products. General specifications. |
28058-89 |
Gold in ingots. Specifications. |
28377-89 |
Powders for gasothermic spraying and depositing. Types. |
28378-89 |
Iron-based powder structural materials. Types. |
28393-89 |
PM bars and strips of high-speed steel. General specifications. |
28394-89 |
Vermicular graphite iron for castings. Grades |
28426-90 |
Thermodiffusion strengthening and protection of metal products. General requirements for technological process. |
28548-90 |
Steel tubes. Terms and definitions. |
28595-90 |
Silver in ingots. Specifications. |
28800-90 |
Metal pipes. Method for determination moisture on the internal surface of pipes |
28873-90 |
Alloys on basis of heavy non-ferrous metals treated under pressure. Unified grades. |
29006-91 |
Metallic powders. Method for determination of hydrogen-reducible oxygen. |
29012-91 |
Powder metallurgy. Method for determination of compacts dimensional changes after compacting pressure relief and at the time of sintering. |
29121-91 |
Carbon steel wire for elevator ropes. Specifications |
29296-92 |
Extruded rectangular unequishelf T-section shapes of aluminium and magnesium alloys. Dimensions |
30136-94 |
Carbon steel wire rods of common quality. Specifications. |
30208-94 |
Surgical instruments. Metall materials. Part 1. Stainless steel |
30245-94 |
Steel bent closed welded square and rectangular section for building. Specifications. |
30246-94 |
Continuously rolled sheet shell with paint coating for building |
30272-96 |
Black collar axles (profile stock) for 1520mm gauge railways. Specifications. |
30273-98 |
Circular and rectangular electromagnetic chucks. General Specifications |
30563-98 |
Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications. |
30564-98 |
Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications. |
30565-98 |
Hot-rolled steel shapes for machine-building in chemical engineering and oil industry. General specifications. |
30620-98 |
Aluminium piston alloys. Specifications |
30649-99 |
Noble metals based alloys for jewelery. Marks. |
30753-2001 |
Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
P 50067-92 |
Extruded rectangular uneqishelf zee-section shapes of aluminium and magnesium alloys. Dimensions |
P 50077-92 |
Extruded oblique angle section shapes of aluminium and magnesium alloys. Dimensions. |
P 50278-92 |
Drill pipes with weld-on tool joints. Specifications. |
P 50328.1-92 |
Surgical instruments. Metall materials. Part 1. Stainless steel |
P 50566-93 |
Steel wire for mechanical springs. General requirements. |
P 50567-93 |
Steel wire for mechanical springs cold-drown carbon steel. |
P 50865-96 |
Rails. Method of test on corrosion fatigue life. |
P 51045-97 |
Steel rais of RP50, RP65 and RP75 types for industrial tracks. General specifications. |
P 51152-98 |
Alloys based on noble metals for jewellery. Marks. |
P 51162-98 |
Casting aluminium utensils. General specifications. |
P 51245-99 |
Steel universal drill rods. General Specifications. |
P 51393-99 |
Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications. |
P 51394-99 |
Wrought stainless stell for surgical implants. Specifications. |
P 51395-99 |
ChK62M6L alloy cast rods for artifical joints. Specifications. |
P 51396-99 |
Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications. |
P 51397-99 |
Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications. |
P 51510-99 |
Geological research drill rods. Types and main dimensions |
P 51572-2000 |
Gold weighted bullions. Specifications. |
P 51573-2000 |
Tubes from alloyed brasses for heat-exchange apparatus. Specifications. |
P 51682-2000 |
Casing and coring tubes for geology-exploring drilling. Specifications |
P 51685-2000 |
Ralway rails. General specifications. |
P 51687-2000 |
Stainless steel table and kitchen cutlery. General specifications. |
P 51704-2001 |
Platinum weighted ingots. Specifications. |
P 51767-2001 |
Nickel-base billets for orthopedic dentistry. General specifications |
P 51775-2001 |
Wheel sets for special-purpose rolling stock. General specifications |
P 51776-2001 |
Double tube core barrels for exploration drilling. Types and main parameters |
P 51784-2001 |
Silver weihted ingots. Specifications |
P 51834-2001 |
Extruded aluminium alloy bars of high strenght and improved ductility. Specifications. |
P 51924-2002 |
Double tube core barrel for exploration drilling. General technical specifications. |
P 52079-2003 |
Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications |
P 52116-2003 |
Utensils of cast-iron. General specifications |
P 52146-2003 |
Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepeinted by the continuous coil-coating process. Specifications |
P 52203-2004 |
Tubing and coupling. Specifications |
P 52204-2004 |
Cold-rolled blackplate and tinplate. Specifications |
P 52244-2004 |
Refined palladium. Specifications |
P 52245-2004 |
Refined platinum. Specifications |
P 60851.2-2002 |
Winding wires. Test methods. Part 2. Determination of dimensions. |
P 60851.3-2002 |
Winding wires. Test methods. Part 3. Mechanical properties. |
P 60851.4-2002 |
Winding wires. Text methods. Part 4. Chemical properties |
P 60851.5-2002 |
Winding wires. Test methods. Part 5. Electrical properties. |