ASTM/ASME/ANSI STEEL PIPE TECHNICAL SPECIFICATIONS |
Nos. |
Specication Name |
ANSI LC-1-2005 |
Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26) |
ANSI/AGA LC-1-1991 |
Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing |
ANSI/AGA LC-1a-1993 |
Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing |
ANSI/AGA LC-1b-1994 |
Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing |
ANSI/ASME A112.19.4M Supplement 1-1998 |
Porcelain Enameled Formed Steel Plumbing Fixtures; Supplement 1 |
ANSI/ASME A112.19.4M Supplement 2-2000 |
Porcelain Enameled Formed Steel Plumbing Fixtures; Supplement 2 |
ANSI/ASME B36.10M-2004 |
Welded and Seamless Wrought Steel Pipe |
ANSI/ASME B36.19M-2004 |
Stainless Steel Pipe |
ANSI/ASTM A182/A 182M-2001 |
Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ANSI/ASTM A210-1996 |
Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
ANSI/ASTM A213/A 213M-2001 |
Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ANSI/ASTM A312/A 312M-2001 |
Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
ANSI/ASTM A450-1996 |
Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
ANSI/ASTM A523-1996 |
Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
ANSI/ASTM A608-1991 |
Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
ANSI/ASTM A789/A 789M-2001 |
Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
ANSI/ASTM A814/A 814M-2001 |
Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
ANSI/ASTM A815/A 815M-2001 |
Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
ANSI/AWS D10.12M/D 10.12-2000 |
Guide for Welding Mild Steel Pipe |
ANSI/AWS D10.4-1986 |
Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for |
ANSI/AWS D18.1-1999 |
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications |
ANSI/AWS D18.2-1999 |
Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube |
ANSI/AWWA C203-2002 |
Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied |
ANSI/AWWA C208-2001 |
Fabricated Steel Water Pipe Fittings, Dimensions for |
ANSI/AWWA C213-2001 |
Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
ANSI/AWWA C214-2007 |
Tape Coating Systems for the Exterior of Steel Water Pipelines |
ANSI/AWWA C216-2007 |
Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
ANSI/AWWA C217-1999 |
Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines |
ANSI/AWWA C220-1998 |
Stainless Steel Pipe 4 in (100 mm) and Larger |
ANSI/AWWA C220a-1999 |
Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98 |
ASME A112.19.4M Supplement 2-2 |
(Porcelain enameled formed steel plumbing fixtures - Supplement 2) |
ASME A112.19.4M-1994 |
(Porcelain enameled formed steel plumbing fixtures) |
ASME B36.19M-1985 |
(Stainless steel pipe) |
ASTM A 1016/A 1016Ma-2004 |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
ASTM A 1019/A 1019M-2001 |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
ASTM A 1020/A 1020M-2002 |
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
ASTM A 1024/A 1024M-2002 |
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
ASTM A 1037/A 1037M-2005 |
Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded |
ASTM A 1042/A 1042M-2004 |
Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains |
ASTM A 1053/A 1053M-2006 |
Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
ASTM A 106/A 106Ma-2006 |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
ASTM A 134-1996 |
Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
ASTM A 135/A 135M-2006 |
Standard Specification for Electric-Resistance-Welded Steel Pipe |
ASTM A 139/A 139M-2004 |
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM A 179/A 179Ma-1990 |
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 182/A 182Ma-2007 |
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 209/A 209M-2003 |
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
ASTM A 214/A 214M-1996 |
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 234/A 234M-2007 |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM A 252-1998 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
ASTM A 254-1997 |
Standard Specification for Copper-Brazed Steel Tubing |
ASTM A 268/A 268Ma-2005 |
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
ASTM A 269a-2007 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
ASTM A 270a-2003 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
ASTM A 312/A 312M-2007 |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
ASTM A 333/A 333M-2005 |
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
ASTM A 334/A 334Ma-2004 |
Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
ASTM A 335/A 335M-2006 |
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 358/A 358M-2005 |
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
ASTM A 369/A 369M-2006 |
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
ASTM A 376/A 376M-2006 |
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
ASTM A 381-1996 |
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
ASTM A 403/A 403M-2007 |
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
ASTM A 409/A 409M-2001 |
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
ASTM A 423/A 423M-1995 |
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
ASTM A 426/A 426M-2007 |
Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
ASTM A 450/A 450Ma-2004 |
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
ASTM A 451/A 451M-2006 |
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service |
ASTM A 513-2007 |
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
ASTM A 520-1997 |
Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction |
ASTM A 523-1996 |
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
ASTM A 524-1996 |
Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
ASTM A 53/A 53M-2007 |
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM A 530/A 530Ma-2004 |
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
ASTM A 587-1996 |
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
ASTM A 595/A 595M-2006 |
Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use |
ASTM A 608/A 608M-2006 |
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature |
ASTM A 618/A 618M-2004 |
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
ASTM A 632-2004 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
ASTM A 660-1996 |
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM A 671-2006 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
ASTM A 672-2006 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
ASTM A 691-1998 |
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
ASTM A 714-1999 |
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
ASTM A 742/A 742M-2003 |
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
ASTM A 758/A 758M-2000 |
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
ASTM A 760/A 760M-2006 |
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
ASTM A 762/A 762M-2000 |
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
ASTM A 778-2001 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
ASTM A 789/A 789Mb-2005 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
ASTM A 790/A 790M-2007 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
ASTM A 795/A 795M-2007 |
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
ASTM A 796/A 796M-2006 |
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
ASTM A 798/A 798M-2007 |
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
ASTM A 810-2001 |
Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
ASTM A 813/A 813M-2007 |
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
ASTM A 814/A 814M-2007 |
Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
ASTM A 815/A 815Ma-2007 |
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
ASTM A 822/A 822M-2004 |
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
ASTM A 865/A 865M-2006 |
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
ASTM A 872/A 872Ma-2007 |
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
ASTM A 928/A 928M-2005 |
Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
ASTM A 929/A 929M-2001 |
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
ASTM A 943/A 943M-2001 |
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
ASTM A 949/A 949M-2001 |
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
ASTM A 960/A 960M-2007 |
Standard Specification for Common Requirements for Wrought Steel Piping Fittings |
ASTM A 978/A 978M-1997 |
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications |
ASTM A 998/A 998M-1998 |
Standard Practice for Structural Design of Reinforcements for Fittings in Factory - Made Corrugated Steel Pipe for Sewers and Other Applications |
ASTM A 999/A 999Ma-2004 |
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
ASTM B 861a-2006 |
Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
ASTM C 1610/C 1610Ma-2006 |
Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
ASTM E 570-1997 |
Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
ASTM F 1083-2006 |
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 2181a-2002 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
ASTM F 2408-2007 |
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
ASTM F 2589-2006 |
Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
BS EN STEEL PIPE TECHNICAL SPECIFICATIONS |
Nos. |
Specication Name |
S 1600-1991 |
Specification for dimensions of steel pipe for the petroleum industry |
BS 1640-1-1962 |
Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings |
BS 1640-4-1968 |
Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units |
BS 1717-1983 |
Specification for steel tubes for cycle and motor cycle purposes |
BS 2633-1987 |
Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
BS 2971-1991 |
Specification for class II arc welding of carbon steel pipework for carrying fluids |
BS 2T 57-1972 |
Specification for 4/1 nickel-chromium steel tube (1150 N/mm2) |
BS 2T 66-1980 |
Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) |
BS 2T 68-1980 |
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) |
BS 3293-1960 |
Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
BS 3604-2-1991 |
Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes |
BS 3799-1974 |
Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
BS 3868-1995 |
Specification for prefabricated drainage stack units in galvanized steel |
BS 3T 53-1980 |
Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) |
BS 3T 60-1980 |
Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm) |
BS 4204-1989 |
Specification for flash welding of steel tubes for pressure applications |
BS 4515-1-2004 |
Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines |
BS 4515-2-1999 |
Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines |
BS 4677-1984 |
Specification for arc welding of austenitic stainless steel pipework for carrying fluids |
BS 4825-1-1991 |
Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for tubes |
BS 4825-2-1991 |
Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for bends and tees |
BS 4825-3-1991 |
Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for clamp type couplings |
BS 4825-4-1991 |
Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for threaded (IDF type) coupling |
BS 4825-5-1991 |
Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for recessed ring joint type couplings |
BS 4T 100-1997 |
Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock |
BS 4T 45-1972 |
Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) |
BS 5242-1-1987 |
Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces |
BS 5383-1986 |
Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes |
BS 5482-1-2005 |
Code of practice for domestic butane- and propane-gas-burning installations - Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper |
BS 5S 100-1993 |
Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube) |
BS 5T 2-1972 |
Specification for 4/1 nickel-chromium steel tube (1300 N/mm2) |
BS 6362-1990 |
Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads' |
BS 6990-1989 |
Code of practice for welding on steel pipes containing process fluids or their residuals |
BS 7416-1991 |
Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems |
BS 778-1966 |
Specification for steel pipes and joints for hydraulic purposes |
BS 7873-1996 |
Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes |
BS 879-1-1985 |
Water well casing - Specification for steel tubes for casing |
BS EN 10208-1-1998 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class A |
BS EN 10208-2-1997 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class B |
BS EN 10216-1-2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions |
BS EN 10216-2-2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10216-3-2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
BS EN 10216-4-2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions |
BS EN 10216-5-2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
BS EN 10217-1-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties |
BS EN 10217-2-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10217-3-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
BS EN 10217-4-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties |
BS EN 10217-5-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10217-6-2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties |
BS EN 10217-7-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
BS EN 10220-2002 |
Seamless and welded steel tubes - Dimensions and masses per unit length |
BS EN 10224-2002 |
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions |
BS EN 10240-1998 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
BS EN 10241-2000 |
Steel threaded pipe fittings |
BS EN 10246-1-1996 |
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
BS EN 10246-10-2000 |
Non-destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
BS EN 10246-11-2000 |
Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
BS EN 10246-12-2000 |
Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
BS EN 10246-13-2000 |
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
BS EN 10246-14-2000 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
BS EN 10246-15-2000 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
BS EN 10246-16-2000 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
BS EN 10246-17-2000 |
Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
BS EN 10246-18-2000 |
Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
BS EN 10246-2-2000 |
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
BS EN 10246-3-2000 |
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
BS EN 10246-4-2000 |
Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
BS EN 10246-5-2000 |
Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
BS EN 10246-6-2000 |
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
BS EN 10246-7-2005 |
Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
BS EN 10246-8-2000 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
BS EN 10246-9-2000 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
BS EN 10255-2004 |
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
BS EN 10256-2000 |
Non-destructive testing on steel tubes - Qualification and competence of level 1 and level 2 non-destructive testing personnel |
BS EN 10266-2003 |
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
BS EN 10288-2002 |
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
BS EN 10289-2002 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
BS EN 10290-2002 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
BS EN 10296-1-2003 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
BS EN 10296-2-2005 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel |
BS EN 10297-1-2003 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
BS EN 10297-2-2005 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel |
BS EN 10298-2005 |
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
BS EN 10300-2005 |
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
BS EN 10301-2003 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
BS EN 10305-1-2002 |
Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes |
BS EN 10305-2-2002 |
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes |
BS EN 10305-3-2002 |
Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes |
BS EN 10305-4-2003 |
Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems |
BS EN 10305-5-2003 |
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
BS EN 10305-6-2005 |
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems |
BS EN 10310-2004 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
BS EN 10311-2005 |
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
BS EN 10312-2003 |
Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions |
BS EN 10329-2006 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
BS EN 10339-2007 |
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
BS EN 1123-1-1999 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
BS EN 1123-2-2006 |
Pipes and fittings of longitudinally welded hot-dip galvanized steeltube with spigot and socket for waste water systems — Part 2: Dimensions |
BS EN 1123-3-2004 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
BS EN 1124-1-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
BS EN 1124-2-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions |
BS EN 1124-3-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions |
BS EN 1124-4-2005 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships |
BS EN 12068-1999 |
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
BS EN 12732-2000 |
Gas supply systems - Welding steel pipework - Functional requirements |
BS EN 253-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
BS EN 39-2001 |
Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions |
BS EN 448-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
BS EN 488-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
BS EN 489-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
BS EN ISO 11120-1999 |
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing |
BS EN ISO 1127-1997 |
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
BS EN ISO 11960-2005 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells |
BS EN ISO 11961-1997 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification |
BS EN ISO 13680-2002 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
BS EN ISO 9455-12-1994 |
Soft soldering fluxes - Test methods - Steel tube corrosion test |
BS ISO 15741-2002 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
BS ISO 16172-2006 |
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
BS ISO 8535-1-2006 |
Diesel engines - Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes |
BS ISO 8535-2-2004 |
Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes |
BS T 64-1972 |
Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable) |
BS T 67-1972 |
Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable) |
BS T 69-1972 |
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable) |
BS T 72-T 73-1977 |
Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa) |
BS T 74-1972 |
Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel tube (500 N/mm2) |
BS T 75-1972 |
Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm2) |
BS T 76-1978 |
Specification for chromium-molybdenum steel tube (770 MPa) (weldable) |
BS T 77-1980 |
Specification for chromium-molybdenum steel tube (900 MPa) (weldable) |
BS T 78-1997 |
Specification for 21/2% nickel-chromium-molybdenum steel tubes (1390 Mpa) |
BS T 79-1997 |
Specification for 21/2% nickel-chromium-molybdenum steel tubes (1160 MPa) |
BS T 80-1997 |
Specification for 12% chromium corrosion-resisting steel tubes (770 MPa) |
DD ENV 10220-1994 |
Seamless and welded steel tubes. Dimensions and masses per unit length |
KIT 159-2004 |
Steel tubes technical delivery conditions kit |
EN 10028-7-2000 |
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 10208-1-1997 |
Steel pipes for pipelines for combustible fluids - Tec |
|
|
DIN STEEL PIPE STANDARDS |
Nos. |
Specication Name |
DIN 11850-1999 |
Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials |
DIN 1478-2005 |
Turnbuckles made from steel tubes or round steel bars |
DIN 1547-6-1969 |
Tube drawing dies for steel |
DIN 1564-1997 |
Steel fittings for railway vehicles - Sockets, reducing sockets |
DIN 1565-1997 |
Steel fittings for railway vehicles - Pipe nipples, double pipe nipples, swadged nipples |
DIN 1566-1997 |
Steel fittings for railway vehicles - Double nipples, reduced double nipples |
DIN 1567-1997 |
Steel fittings for railway vehicles - T-irons, reducing socket |
DIN 1568-1997 |
Steel fittings for railway vehicles - Cross pieces |
DIN 1569-1997 |
Steel fittings for railway vehicles - Elbows, Y-fittings |
DIN 1988-7-2004 |
Turnbuckles made from steel tubes or round steel bars |
DIN 20002-1-1989 |
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10 |
DIN 20002-2-1989 |
Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6 |
DIN 20002-3-1989 |
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40 |
DIN 20003-1-1987 |
Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 10 |
DIN 20003-2-1987 |
Steel tubes for mining; fittings with loose flanges and plain collars, projection and recess; nominal pressure 6 |
DIN 20003-3-1987 |
Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 40 |
DIN 20004-1-2000 |
Steel tubes for mining - Part 1: Interpose rings rated for PN 10 and PN 40 |
DIN 20004-2-2000 |
Steel tubes for mining - Part 2: Wedge rings rated for PN 10 and PN 40 |
DIN 20006-1989 |
Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003 |
DIN 2442-1963 |
Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100 |
DIN 2445 Bb.1-2000 |
Seamless steel tubes for dynamic loads - Design rules |
DIN 2445-1-2000 |
Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar |
DIN 2445-2-2000 |
Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar |
DIN 2460-2006 |
Steel water pipes and fittings |
DIN 2470-1-1987 |
Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings |
DIN 2605-1-1991 |
Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor |
DIN 2616-1-1991 |
Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor |
DIN 2616-2-1991 |
Steel butt-welding pipe fittings; reducers for use at full service pressure |
DIN 2617-1991 |
Steel butt-welding pipe fittings; caps |
DIN 28180-2007 |
Seamless steel tubes for tubular heat exchangers - Dimensions and materials |
DIN 28181-2007 |
Welded steel tubes for tubular heat exchangers - Dimensions and materials |
DIN 28461-1987 |
Flanges for tank trucks; plain welding flanges for steel tubes |
DIN 2848-2002 |
Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40 |
DIN 2875-2002 |
Flanged steel pipes and fittings with hard or soft rubber linings - Technical delivery conditions |
DIN 2876-2002 |
Flanged steel pipes and flanged steel fittings glass lined - Technical specifications |
DIN 2880-1999 |
Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
DIN 2916-1975 |
Bending Radii for Seamless and Welded Steel Tubes; Design Sheet |
DIN 30675-1-1992 |
External corrosion protection of buried pipes; corrosion protection systems for steel pipes |
DIN 30678-1992 |
Polypropylene coatings for steel pipes |
DIN 32676-2001 |
Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type |
DIN 40432-2000 |
Sets of two taps for steel conduit thread Pg 7 to Pg 48 |
DIN 40433-2000 |
Machine taps for steel conduit thread Pg 7 to Pg 48 |
DIN 40434-1987 |
Circular screwing dies for steel conduit thread, Pg 7 to Pg 48 |
DIN 41097-1-1964 |
Steel tube support for electrical siren 125-500 V a.c. standard type with and without electric protective insulation, parts list |
DIN 43614-2-1980 |
Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits |
DIN 49023-1975 |
Conduits and fittings for electrical installation; flexible corrugated conduits of steel |
DIN 4945-1-2005 |
Rising pipes with tension proof socket for water raising - Part 1: Steel pipes DN 50 to DN 200, plastic coated |
DIN 4945-2-2006 |
Rising pipes with tension proof socket for water raising - Part 2: Stainless steel pipes DN 50 to DN 200 |
DIN 7584-1980 |
Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar |
DIN 7588-1994 |
Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
DIN 7589-1994 |
Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
DIN 86009-1986 |
Exhaust gas lines on ships; steel tubes |
DIN 86016-1991 |
Pipe brackets of steel for ships pipelines of unplasticized polyvinyl cloride (PVC-U) |
DIN 86056-2001 |
Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys |
DIN 86059-1976 |
Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10 |
DIN 86061-1976 |
Connecting sockets with pipe flange, for steel tubes, nominal pressure 10 |
DIN 86064-1976 |
Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10 |
DIN 86287-1999 |
Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment |
DIN EN 10208-1-1998 |
Steel pipes for pipe lines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A; German version EN 10208-1:1997 |
DIN EN 10208-2-1996 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirements class B; German version EN 10208-2:1996 |
DIN EN 10216-1-2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004 |
DIN EN 10216-2-2007 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007 |
DIN EN 10216-3-2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004 |
DIN EN 10216-4-2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004 |
DIN EN 10216-5-2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004 |
DIN EN 10217-1-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005 |
DIN EN 10217-2-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005 |
DIN EN 10217-3-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005 |
DIN EN 10217-4-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005 |
DIN EN 10217-5-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005 |
DIN EN 10217-6-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005 |
DIN EN 10217-7-2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2005 |
DIN EN 10220-2003 |
Seamless and welded steel tubes - General tables of dimensions and masses per unit length; German version EN 10220:2002 |
DIN EN 10240-1998 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997 |
DIN EN 10241-2000 |
Steel threaded pipe; German version EN 10241:2000 |
DIN EN 10246-1-1996 |
Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996 |
DIN EN 10246-10-2000 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; German version EN 10246-10:2000 |
DIN EN 10246-11-2000 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; German version EN 10246-11:2000 |
DIN EN 10246-12-2000 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; German version EN 10246-12:2000 |
DIN EN 10246-13-2000 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; German version EN 10246-13:2000 |
DIN EN 10246-14-2000 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; German version EN 10246-14:1999 |
DIN EN 10246-15-2000 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; German version EN 10246-15:2000 |
DIN EN 10246-16-2000 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; German version EN 10246-16:2000 |
DIN EN 10246-17-2000 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; German version EN 10246-17:2000 |
DIN EN 10246-18-2000 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000 |
DIN EN 10246-2-2000 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000 |
DIN EN 10246-3-2000 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999 |
DIN EN 10246-4-2000 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
DIN EN 10246-5-2000 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German version EN 10246-5:1999 |
DIN EN 10246-6-2000 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999 |
DIN EN 10246-7-2005 |
Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections; German version EN 10246-7:2005 |
DIN EN 10246-8-2000 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; German version EN 10246-8:1999 |
DIN EN 10246-9-2000 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections; German version EN 10246-9:2000 |
DIN EN 10255-2007 |
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions; German version EN 10255:2004 + A1:2007 |
DIN EN 10256-2000 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel; German version EN 10256:2000 |
DIN EN 10266-2003 |
Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards; German version EN 10266:2003 |
DIN EN 10288-2003 |
Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings; German version EN 10288:2002 |
DIN EN 10289-2004 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002 |
DIN EN 10290-2004 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002 |
DIN EN 10296-1-2004 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10296-1:2002 |
|
|
ISO STEEL PIPE TECHNICAL SPECIFICATION |
|
|
ISO 10124-1994 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections |
ISO 10332-1994 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness |
ISO 10543-1993 |
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing |
ISO 10763-1994 |
Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures |
ISO 11120-1999 |
Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing |
ISO 1127-1992 |
Stainless steel tubes; dimensions, tolerances and conventional masses per unit length |
ISO 1129-1980 |
Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length |
ISO 11484-1994 |
Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel |
ISO 11496-1993 |
Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections |
ISO 11960 Technical Corrigendum 1-2006 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1 |
ISO 11960-2004 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells |
ISO 11961-1996 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification |
ISO 12094-1994 |
Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
ISO 12095-1994 |
Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing |
ISO 12096-1996 |
Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections |
ISO 13663-1995 |
Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
ISO 13664-1997 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
ISO 13665-1997 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections |
ISO 13680 Technical Corrigendum 2-2004 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2 |
ISO 13680-2000 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
ISO 15741-2001 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
ISO 16172-2006 |
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
ISO 2037-1992 |
Stainless steel tubes for the industry |
ISO 2937-1974 |
Plain end seamless steel tubes for mechanical application |
ISO 3183-2007 |
Petroleum and natural gas industries - Steel pipe for pipeline transportation systems |
ISO 3183-3 Technical Corrigendum 1-2000 |
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1 |
ISO 3304-1985 |
Plain end seamless precision steel tubes; Technical conditions for delivery |
ISO 3305-1985 |
Plain end welded precision steel tubes; Technical conditions for delivery |
ISO 3306-1985 |
Plain end as-welded and sized precision steel tubes; Technical conditions for delivery |
ISO 3545-1-1989 |
Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section |
ISO 3545-2-1989 |
Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections |
ISO 3545-3-1989 |
Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section |
ISO 4200-1991 |
Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length |
ISO 4394-1-1980 |
Fluid power systems and components-- Cylinder barrels; Part 1 : Requirements for steel tubes with specially finished bores |
ISO 5252-1991 |
Steel tubes; tolerance systems |
ISO 5256-1985 |
Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials |
ISO 5625-1978 |
Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16 |
ISO 65-1981 |
Carbon steel tubes suitable for screwing in accordance with ISO 7/1 |
ISO 6758-1980 |
Welded steel tubes for heat exchangers |
ISO 6759-1980 |
Seamless steel tubes for heat exchangers |
ISO 6761-1981 |
Steel tubes; Preparation of ends of tubes and fittings for welding |
ISO 7598-1988 |
Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
ISO 8535-1-2006 |
Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes |
ISO 8535-2-2003 |
Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes |
ISO 9095-1990 |
Steel tubes; continuous character marking and colour coding for material identification |
ISO 9302-1994 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness |
ISO 9303-1989 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections |
ISO 9304-1989 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections |
ISO 9305-1989 |
Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections |
ISO 9329-1-1989 |
Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties |
ISO 9329-2-1997 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
ISO 9329-3-1997 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties |
ISO 9329-4-1997 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels |
ISO 9330-1-1990 |
Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties |
ISO 9330-2-1997 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
ISO 9330-3-1997 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO 9330-4-2000 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
ISO 9330-5-2000 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO 9330-6-1997 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes |
ISO 9402-1989 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
ISO 9455-12-1992 |
Soft soldering fluxes; test methods; part 12: steel tube corrosion test |
ISO 9598-1989 |
Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
ISO 9764-1989 |
Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
ISO 9765-1990 |
Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
|
|
|
|
JIS STEEL PIPE TECHNICAL SPECIFICATION |
Nos. |
Specication Name |
JIS A5525-2004 |
Steel pipe piles |
JIS A5530-2004 |
Steel pipe sheet piles |
JIS A8651-1995 |
Tubular steel adjustable shores |
JIS A8951-1995 |
Tubular steel scaffolds |
JIS B0151-2001 |
Iron and steel pipe fittings -- Vocabulary |
JIS B2220-2004 |
Steel pipe flanges |
JIS B2302-1998 |
Screwed type steel pipe fittings |
JIS C8305-1999 |
Rigid steel conduits |
JIS C8380-1993 |
Plastic coated steel pipes for cable-ways |
JIS F0507-1992 |
Small ships -- Steel pipes -- Application |
JIS F7231-2003 |
Shipbuilding -- Steel tube starting air reservoirs |
JIS F7810-1995 |
Shipbuilding -- Welding sleeve type joints for steel pipe |
JIS G0582-2004 |
Ultrasonic examination for steel pipes and tubes |
JIS G0583-2004 |
Eddy current examination of steel pipes and tubes by encircling coil technique |
JIS G0584-2004 |
Ultrasonic examination for arc welded steel pipes |
JIS G3429-2006 |
Seamless steel tubes for high pressure gas cylinder |
JIS G3441-2004 |
Alloy steel tubes for machine purposes |
JIS G3442-2004 |
Galvanized steel pipes for ordinary piping |
JIS G3443-1-2007 |
Coated steel pipes for water service -- Part 1: Pipes |
JIS G3443-2-2007 |
Coated steel pipes for water service -- Part 2: Fittings |
JIS G3443-3-2007 |
Coated steel pipes for water service -- Part 3: External plastic coatings |
JIS G3443-4-2007 |
Coated steel pipes for water service -- Part 4: Internal epoxy coatings |
JIS G3444-2006 |
Carbon steel tubes for general structural purposes |
JIS G3445-2006 |
Carbon steel tubes for machine structural purposes |
JIS G3446-2004 |
Stainless steel pipes for machine and structural purposes |
JIS G3448-2004 |
Light gauge stainless steel tubes for ordinary piping |
JIS G3452-2004 |
Carbon steel pipes for ordinary piping |
JIS G3454-2007 |
Carbon steel pipes for pressure service |
JIS G3455-2005 |
Carbon steel pipes for high pressure service |
JIS G3456-2004 |
Carbon steel pipes for high temperature service |
JIS G3457-2005 |
Arc welded carbon steel pipes |
JIS G3458-2005 |
Alloy steel pipes |
JIS G3459-2004 |
Stainless steel pipes |
JIS G3460-2006 |
Steel pipes for low temperature service |
JIS G3461-2005 |
Carbon steel boiler and heat exchanger tubes |
JIS G3462-2004 |
Alloy steel boiler and heat exchanger tubes |
JIS G3463-2006 |
Stainless steel boiler and heat exchanger tubes |
JIS G3464-2006 |
Steel heat exchanger tubes for low temperature service |
JIS G3465-2006 |
Seamless steel tubes for drilling |
JIS G3467-2006 |
Steel tubes for fired heater |
JIS G3468-2004 |
Large diameter welded stainless steel pipes |
JIS G3469-2002 |
Polyethylene coated steel pipes |
JIS G3471-1977 |
Corrugated steel pipes and sections |
JIS G3472-2007 |
Electric resistance welded carbon steel tubes for automobile |
JIS G3473-2007 |
Carbon steel tubes for cylinder barrels |
JIS G3474-2008 |
High tensile strength steel tubes for steel tower |
JIS G3475-2008 |
Carbon steel tubes for building structure |
JIS G5201-1991 |
Centrifugally cast steel pipes for welded structure |
JIS G5202-1991 |
Centrifugally cast steel pipes for high temperature and high pressure service |
JIS G7215-2003 |
Plain end seamless steel tubes for mechanical application (ISO specifications) |
JIS G7216-2003 |
Plain end seamless precision steel tubes -- Technical conditions for delivery (ISO specifications) |
JIS G7217-2003 |
Plain end welded precision steel tubes -- Technical conditions for delivery (ISO specifications) |
JIS G7218-2003 |
Plain end as-welded and sized precision steel tubes -- Technical conditions for delivery (ISO specifications) |
JIS G7219-2003 |
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties (ISO specifications) |
JIS G7220-2003 |
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties (ISO specifications) |
JIS G7221-2003 |
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties (ISO specifications) |
JIS G7222-2003 |
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels (ISO specifications) |
JIS G7223-2003 |
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties (ISO specifications) |
JIS G7224-2003 |
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties (ISO specifications) |
JIS G7225-2003 |
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties (ISO specifications) |
JIS G7226-2003 |
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes (ISO specifications) |
JIS H3300-2006 |
Copper and copper alloy seamless pipes and tubes |
JIS H3510-2006 |
Oxygen free copper sheets, plates, strips, seamless pipes and tubes, rods, bars and wires for electron devices |
|
|
FRENCH STEEL PIPE SPECIFICATIONS |
No. |
Specication Description |
NF A05-677-1999 |
(Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.) |
NF A49-002-1-1991 |
(Steel tubes and fittings. Symbols for use in specifications. Part 1 : tubes and tubular accessories with cross-section.) |
NF A49-002-2-1991 |
(Steel tubes and fittings. Symbols for use in specifications. Part 2 : square and rectangular hollow sections.) |
NF A49-002-3-1991 |
(Steel tubes and fittings. Symbols for use in specifications. Part 3 : tubular fittings with circular cross-section.) |
NF A49-003-1991 |
(Steel tubes. Tolerance systems.) |
NF A49-004-1984 |
(Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.) |
NF A49-005-2003 |
(Seamless and welded steel tubes - General tables of dimensions and masses per unit length.) |
NF A49-031-1979 |
(STEEL TUBES. BENDING RADII. RECOMMENDED MINIMUM VALUES FOR UNALLOYED STEEL TUBES.) |
NF A49-051-1991 |
(Steel tubes. Continuous character marking and colour coding for material identification.) |
NF A49-117-1985 |
(Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.) |
NF A49-141-1978 |
(STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.) |
NF A49-145-1978 |
(STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-147-1980 |
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-148-1980 |
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-150-1985 |
(Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.) |
NF A49-150-2003 |
(Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
NF A49-151-2003 |
(Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
NF A49-160-1979 |
(STEEL TUBES. WELDED TUBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-189-1980 |
(STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-191-1975 |
(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
NF A49-192-1981 |
(STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.) |
NF A49-195-2001 |
(Steel threaded pipe fittings.) |
NF A49-200-1-2002 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
NF A49-200-2-2002 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties.) |
NF A49-200-3-2002 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
NF A49-200-4-2002 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.) |
NF A49-201-1-2002 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
NF A49-201-2-2002 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
NF A49-201-3-2002 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
NF A49-201-4-2002 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.) |
NF A49-201-5-2002 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged ar |
|
|
CHINESE NATIONAL (GB) STEEL PIPE TECHNICAL SPECIFICATION |
No. |
Specication Description |
DL/T 5017-2007 |
Specifications for manufacture installation and acceptance of steel penstocks in hydroelectric and hydraulic engineering |
DL/T 5030-1996(2005) |
() |
DL/T 5130-2001 |
() |
DL/T 5141-2001 |
() |
DL/T 646-2006 |
() |
DL/T 709-1999 |
() |
DL/T 883-2004 |
() |
FZ/T 92046-1995 |
() |
FZ/T 92047-1995 |
() |
GB 13296-2007 |
Seamless stainless steel tubes for boiler and heat exchanger |
GB 15831-2006 |
Steel tube scaffold couplers |
GB 18248-2000 |
Seamless steel tubes for gas cylinder |
GB 3087-1999 |
Seamless steel tubes for lowand medium pressure |
GB 5310-1995 |
Seamless steel tubes and pipes for high pressure boiler |
GB 6479-2000 |
Seamless steel tubes for high-pressure for chemical fertilizer equipments |
GB 9948-2006 |
Seamless steel tubes for petroleum cracking |
GB/T 10752-2005 |
Marine steel butt-welding fittings |
GB/T 12605-1990 |
Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes |
GB/T 12606-1999 |
Steel tubes--The testing method of magnetic flux leakage |
GB/T 12770-2002 |
Welded stainless steel tubes for machine structures |
GB/T 12771-2000 |
Welded stainless steel pipes for liquid delivery |
GB/T 13402-1992 |
Large-diameter carbon steel pipe flanges |
GB/T 13403-1992 |
Gaskets for large-diameter carbon steel pipe flanges |
GB/T 13792-1992 |
Welded steel pipe for supporting roller of belt con-veyer |
GB/T 13793-1992 |
Longitudinal electric resistance welded steel tubes |
GB/T 14291-2006 |
Welded steel tubes for mine liquid service |
GB/T 14975-2002 |
Stainless steel seamless tubes for structures |
GB/T 14976-2002 |
Stainless steel seamless tubes for fluid transport |
GB/T 17395-1998 |
Dimensions,shapes,masses and tolerances of seamless steel tubes |
GB/T 17396-1998 |
Seamless hot-rolled steel tubes for hydraulic pillar service |
GB/T 18256-2000 |
Welded steel tubes(except submerged arc-welded)--Ultrasonic testing for verification of hydraulic leak-tightness |
GB/T 18984-2003 |
Seamless steel tubes for low-temperature-servicepiping |
GB/T 19228.2-2003 |
Light gauge stainless steel pipes for stainless steel press-fittings |
GB/T 19830-2005 |
Petroleum and natural gas industries-Steel pipes for use as casing or tubing for wells |
GB/T 20409-2006 |
Multi-rifled seamless steel tubes for high-pressure boiler |
GB/T 20490-2006 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections |
GB/T 2102-2006 |
Acceptance, packing, marking and quality certification of steel pipe |
GB/T 3089-1982 |
Thinnest-wall seamless tubes of stainless and acid-resistance steel |
GB/T 3090-2000 |
Stainless steel small diameter seamless steel tubes |
GB/T 3091-2001 |
Welded steel pipe for low pressure liquid delively |
GB/T 3093-2002 |
High-pressure seamless steel tubes for diesel engine |
GB/T 3094-2000 |
Cold drawn shaped steel tubes |
GB/T 3639-2000 |
Cold-drawn or cold-rolled precision seamless steel tubes |
GB/T 5312-1999 |
Carbon and carbon-manganese steel seamlesssteel tubes and pipes for ship |
GB/T 5777-1996 |
Seamless steel pipe and tubing--Methods forultrasonic testing |
GB/T 7735-2004 |
Steel tubes--The inspection method on eddy current test |
GB/T 8162-1999 |
Seamless steel tubes for structural purposes |
GB/T 8163-1999 |
Seamless steel tubes for liquid service |
GB/T 9711.1-1997 |
Petroleum and natural gas industries--Steel pipe for pipelines--Technical delivery conditions--Part 1:Pipes of requirements class A |
GB/T 9711.2-1999 |
Petroleum and natural gas industries--Steel pipe for pipelines--Technical delivery conditions--Part 2:Pipes of requirement class B |
GB/T 9711.3-2005 |
Petroleum and natural gas industries-Steel pipe for pipelines-Technical delivery conditions-Part 3:Pipes of requirements class C |
HG 20528-1992 |
() |
HG 20537.2-1992 |
() |
HG/T 20537.1-1992 |
() |
HG/T 20537.3-1992 |
() |
HG/T 20537.4-1992 |
() |
HG/T 20538-1992 |
() |
HG/T 20553-1993 |
() |
HG/T 21501-1993 |
() |
HG/T 21562-1994 |
() |
HG/T 21633-1991 |
() |
HG/T 2437-2006 |
Steel pipes and fitting lined with plastic |
HG/T 3178-2002 |
() |
HG/T 3339-1979(85) |
() |
JB/T 10412-2004 |
() |
JB/T 79.1-1994 |
() |
JB/T 79.2-1994 |
() |
JB/T 79.3-1994 |
() |
JB/T 79.4-1994 |
() |
JB/T 8120.1-2000 |
() |
JB/T 8120.2-2000 |
() |
JB/T 9599-1999 |
() |
MT 558.3-2005 |
() |
QB/T 1422.5-1992 |
() |
QB/T 2072.3-1994 |
() |
QB/T 2467-1999 |
() |
QB/T 2558-2002 |
() |
SH/T 3520-2004 |
() |
SY/T 0066-1999 |
() |
SY/T 0066-1999(2007) |
() |
SY/T 0468-2000 |
() |
SY/T 10002-2000 |
() |
SY/T 5768-2006 |
Welded steel pipe for normal structure purposes |
SY/T 6194-2003 |
() |
SY/T 6423.1-1999(2007) |
() |
SY/T 6423.2-1999(2007) |
() |
SY/T 6423.3-1999(2007) |
() |
SY/T 6423.4-1999(2007) |
() |
SY/T 6423.5-1999(2007) |
() |
SY/T 6423.6-1999(2007) |
() |
SY/T 6423.7-1999(2007) |
() |
SY/T 6476-2007 |
Practice for drop-weight tear tests on steel line pipe |
SY/T 6531-2002 |
() |
SY/T 6577.1-2003 |
() |
SY/T 6577.2-2003 |
() |
SY/T 6601-2004 |
() |
SY/T 6623-2005 |
() |
SY/T 6657-2006 |
PVC lined steel tubular goods |
YB 4102-2000 |
() |
YB 4103-2000 |
() |
YB/T 145-1998(2006 re-confirmed) |
() |
YB/T 171-2000(2006 reconfirmed) |
() |
YB/T 176-2000(2006 re-confirmed) |
() |
YB/T 2008-2007 |
() |
YB/T 4028-2005 |
() |
YB/T 4054-2006 |
() |
YB/T 4082-2000 |
() |
YB/T 4083-2000 |
() |
YB/T 4112-2002 |
() |
YB/T 4124.1-2004 |
() |
YB/T 4124.2-2004 |
() |
YB/T 4146-2006 |
() |
YB/T 4164-2007 |
Double wall copper-brazed steel tubing |
YB/T 4173-2008 |
Forged and bored seamless steel pipes with heavy wall for high-temperature service |
YB/T 4181-2008 |
Double-seam welded square and rectangular tubes |
YB/T 5035-1996(2006 reconfirmed) |
() |
YB/T 5137-2007 |
() |
YB/T 5209-2000 |
() |
YB/T 5363-2006 |
() |
YBJ 233-1991 |
() |
|
|
KS(Korean Standards) |
|
KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP ZINC WATER) |
KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP BLACK) |
KS D 3537 Galvanized Steel Pipes for Water Service (SPPW) |
KS D 3562 Carbon Steel Pipes for Pressure Service (SPPS 370/SPPS 410) |
KS D 3564 Carbon Steel Pipes for High Pressure Service (SPPH 370/SPPH 410/SPPH 480) |
KS D 3569 Steel Pipes for Low Temperature Service (SPLT 380/SPLT 450/SPLT 690) |
KS D 3570 Carbon Steel Pipes for High Temperature Service (SPHT370/SPHT410/SPHT480) |
KS D 3573 Alloy Steel Pipes (SPA 12/SPA 20/SPA 22/SPA 23/SPA 24/SPA 25/SPA 26) |
KS D 3576 Stainless Steel Pipes (STS304TP/STS304HTP/STS304LTP/STS309TP/STS309STP) |
KS D 3583 Arc Welded Carbon Steel Pipes (SPW 400) |
KS D 3585 Stainless Steel sanitary Pipes (STS 304TBS/STS 304LTBS/STS 316TBS) |
KS D 3588 Arc Welded Large Diameter Stainless Steel Pipes (STS 304 TPY/STS 304 LTPY) |
KS D 3589 Polyethylene coated Steel Pipes (P1H/P2S/P1F) |
KS D 3595 Light Gauge Stainless Steel Pipes for Ordinary Piping (STS 304 TPD/STS 316 TPD) |
KS D 3563 Carbon Steel Tubes for Boiler and Heat Exchaner (STBH 340/STBH 410/ 510) |
KS D 3571 Steel Heat Exchanger Tubes for Low Temperature Service (STLT380/STLT450) |
KS D 3572 Alloy Steel for Boiler and Heat Exchanger Tubes (STHA 12/STHA 13/STHA 20) |
KS D 3577 Stainless Steel for Boiler and Heat Exchanger Tubes (STS 304TB/STS 304HTB) |
KS D 3587 Steel Tubes for Fired Heater (STF410/STFA12/STFA22/STFA23/STFA24/STFA25) |
KS D 3517 Carbon steel tubes for machine structural purposes (STKM 11A/STKM 12A) |
KS D 3536 Stainless steel pipes for machine and structural purposes (STS430TKA/430TKC |
KS D 3536 Stainless steel pipes for machine and structural purposes (STS304TKA/430TKC) |
KS D 3566 Carbon steel tubes for general structural purposes (SPS 290/SPS 400/SPS 500) |
KS D 3568 Carbon steel Square for general structural purposes (SPSR 400/SPSR 490) |
KS D 3574 Alloy steel tubes for machine purposes (SCr 420 TK/SCM 415 TK/SCM 418 TK) |
KS D 3590 Corrugated steel pipes and sections (SCP 1 R/SCP 1 RS/SCP 2 R/SCP 3 RS) |
KS D 3598 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes (STAM 290GA/STAM 290GB/STAM 340G/STAM 390G/440G/470G/500G) |
KS D 3618 Carbon Steel Tubes Cylinder Barrels (STC 370/STC 440/STC 510 A/STC 510 B) |
KS D 3780 High Tensile Strength Steel Tubes for Tower Structural Purposes (STKT 540) |
KS F 4602 Steel pipes piles (SPS30/SPS41/SPS51/SPS50/SPS55) |
KS F 4605 Steel pipe sheet piles (SKY 400/SKY 490 ) |
KS D 3575 Seamless Steel Tubes for High Pressure Gas Cylinder (STHG11/STHG12/STHG21) |
KS D 3757 Seamless nickel-chromium-iron alloy heat exchanger tubes (NCF 600 TB) |
KS D 3758 Seamless nickel-chromium-iron alloy pipes (NCF600TP/NCF625TP/NCF690TP) |
KS C 8401 Rigid steel conduits (G16/G22/G28/G36/G42/G54/G70/G82/G92/G104) |
KS E 3114 Seamless Steel Tubes for Drilling (STM-C 540/STM-C 640/STM-R 590/R 690) |